# Lawnmower battery Fulbat FP12-7-2 12V 7.2Ah AGM

![Lawnmower battery Fulbat FP12-7-2 12V 7.2Ah AGM](https://baterias.com/6333-home_default/battery-fulbat-fp12-7-2-12v-7-2ah.jpg)

> Fulbat FP12-7-2 lawnmower battery 12V 7.2Ah AGM. Lawn & Garden VRLA range. Dimensions 151×65×99 mm. For garden machinery.

**Category:** [Lawnmower Batteries](https://baterias.com/gb/lawnmower-batteries) → [FULBAT](https://baterias.com/gb/fulbat)

- **Canonical URL**: https://baterias.com/gb/battery-fulbat-fp12-7-2-12v-7-2ah
- **Language**: en-GB
- **Brand**: FULBAT
- **Reference**: BCOM-FULBAT-FP12-7-2
- **MPN**: FP12-7-2
- **Stock**: Out of stock

## Technical specifications

| Feature | Value |
|---|---|
| Brand | FULBAT |
| Model | FULBAT Lawn & Garden VRLA |
| Voltage (V) | 12 V |
| Largo | 151 mm |
| Ancho | 65 mm |
| Alto | 99 mm |
| Tecnología | AGM |
| Capacity (C20) | 7.2 Ah |
| Capacity (C10) | 6.7 Ah (c10) |

## Quick description

**Fulbat FP12-7-2 12V 7Ah** is a starter battery for lawnmowers and garden machinery, sized to crank reliably after months of storage.

## Why this lawnmower battery?

- **Same JIS reference** as your bike's original — fits first time
- **Sealed and ready to use** no acid handling, no refills
- **Survives winter storage** holds charge through long off-season

🔌 Voltage
12 V

⚡ Capacity
7 Ah C20

📏 Dimensions
151×65×99 mm

⚙️ Technology
AGM

🏷️ Model
FULBAT Lawn & Garden VRLA

#️⃣ Mfr. reference
FP12-7-2

## Description

## Lawn mower battery Fulbat FP12-7-2 7.2Ah 12V

12*V* Voltage
7.2*Ah* Capacity

The **Fulbat FP12-7-2** battery is rated at **12 V**, **7.2 Ah** and is designed for ride-on mowers, tillers and garden machinery. Measuring 151 × 65 × 99 mm, it is the direct replacement for ride-on mowers fitted from the factory with a 7.2 Ah battery of this format.
- AGM: faster recharging and better cycle resistance than a conventional battery.
- Resistant to garden-engine vibration.
- Sealed and maintenance-free.
- Direct replacement for the original battery.

### Will it fit your current battery tray?

The Fulbat FP12-7-2 is made in the 151 × 65 × 99 mm format. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.

### What the Fulbat FP12-7-2 is for

With 7.2 Ah, the Fulbat FP12-7-2 starts ride-on mowers, tillers and garden machinery and copes with garden-engine vibration.

### Technology inside the Fulbat FP12-7-2

The FP12-7-2 is one of the Fulbat references for this type of use; it shares the same manufacturing and quality-control criteria as the rest of the brand's catalogue.
AGM (Absorbent Glass Mat) technology seals the electrolyte in glass microfibre. The result is a maintenance-free battery that is highly vibration-resistant and able to withstand deep discharges that would ruin a classic lead-acid battery.

### What Fulbat does differently

Fulbat has manufactured in France since 1978 and specialises in motorcycles and light vehicles. Its catalogue is short and clear, covers almost the whole fleet and works only with sealed, leak-free batteries. All the Fulbat batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.

### Manufacturer's warranty

The Fulbat FP12-7-2 comes with the **manufacturer's official warranty** against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.

### Care and maintenance

Charge with a charger that has an AGM mode: it limits the voltage and protects the glass-fibre separators. Check the voltage before the first start of the season and clean the terminals.

### When you get it and how to return it

Order **before [[ks:cutoff]]** with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have **[[ks:return_days]] days** to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.

## Frequently asked questions

### How do I fit the FP12-7-2 model in my truck?

In most trucks it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on our blog. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On trucks with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

### How long does the Fulbat FP12-7-2 battery last?

Expected lifespan of the Fulbat FP12-7-2 is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

### What are the dimensions of the Fulbat FP12-7-2 battery?

Dimensions (length × width × height) are 151×65×99 mm — also written as 151x65x99 mm — following the European DIN standard. Always measure the space in your truck before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

### Will the Fulbat FP12-7-2 battery fit my truck?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The FP12-7-2 typically fits a wide range of European vehicles thanks to its standard DIN case format.

### Which batteries are equivalent to the Fulbat FP12-7-2?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop trucks. See the "Equivalents" section to view recommended options at the same performance level.


## Technical team (editorial authorship)

The FAQs, guides and comparisons on this site are reviewed by the baterias.com technical team — automotive battery specialists since 2012.

→ https://baterias.com/gb/technical-team

---
*baterias.com — Automotive batteries · 2026-10-20*
