# Stationary UPS battery Fulbat FP12-80 12V 80Ah AGM

![Stationary UPS battery Fulbat FP12-80 12V 80Ah AGM](https://baterias.com/6353-home_default/battery-fulbat-fp12-80-12v-80ah.jpg)

> Fulbat FP12-80 stationary UPS battery 12V 80Ah AGM. FP General Purpose range. Dimensions 260×168×214 mm, + terminal on the left. Long float life.

**Category:** [Batteries for UPS / UPS](https://baterias.com/gb/batteries-for-sai-ups) → [FULBAT](https://baterias.com/gb/fulbat)

- **Canonical URL**: https://baterias.com/gb/battery-fulbat-fp12-80-12v-80ah
- **Language**: en-GB
- **Brand**: FULBAT
- **Reference**: BCOM-FULBAT-FP12-80
- **MPN**: FP12-80
- **Last updated**: 2026-10-02
- **Stock**: Out of stock

## Technical specifications

| Feature | Value |
|---|---|
| Brand | FULBAT |
| Model | FULBAT FP General Purpose |
| Voltage (V) | 12 V |
| Largo | 260 mm |
| Ancho | 168 mm |
| Alto | 214 mm |
| Tecnología | AGM |
| Terminal layout | Positive left |
| Terminal type | BOLT-M6 |
| Capacity (C20) | 80 Ah |

## Quick description

**Fulbat FP12-80 12V 80Ah** is a stationary battery for backup power systems: UPS, alarms, telecom and emergency lighting. Long float-life under permanent charge and instant response to mains outages with no noticeable voltage drop.

## Why this stationary battery?

- **Instant response** when the mains drop, no voltage dip
- **Long life under 24/7 charge** optimised for permanent service
- **Compatible with your system** existing UPS units and alarm control panels

🔌 Voltage
12 V

⚡ Capacity
80 Ah C20

📏 Dimensions
260×168×214 mm

⚙️ Technology
AGM

🧭 Polarity
Positive on the left

## Description

## Stationary battery Fulbat FP12-80 80Ah 12V

12*V* Voltage
80*Ah* Capacity

The **Fulbat FP12-80** with AGM technology is a **80 Ah**, **12 V** backup battery for UPS, alarms, telecoms and emergency lighting. It replaces the original battery without adaptation in UPS, alarm and emergency systems with a 260 × 168 × 214 mm format: same 80 Ah capacity and the positive terminal on the left.
- Sealed and gas-free: suitable for cabinets and offices.
- Maintenance-free for its whole service life.
- AGM technology: absorbed electrolyte, no spills, can be mounted at an angle.
- Long float life under permanent charge.

### Dimensions, polarity and mounting

The Fulbat FP12-80 is made in the 260 × 168 × 214 mm format. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses BOLT-M6 terminals, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.

### What the Fulbat FP12-80 is for

With 80 Ah, the Fulbat FP12-80 gives your UPS or emergency system the autonomy it needs. Replace all the batteries in the set at once. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has BOLT-M6 terminals.

### Technology inside the Fulbat FP12-80

The FP12-80 is one of the Fulbat references for this type of use; it shares the same manufacturing and quality-control criteria as the rest of the brand's catalogue.
AGM (Absorbent Glass Mat) technology seals the electrolyte in glass microfibre. The result is a maintenance-free battery that is highly vibration-resistant and able to withstand deep discharges that would ruin a classic lead-acid battery.

### Why choose Fulbat batteries

Fulbat has manufactured in France since 1978 and specialises in motorcycles and light vehicles. Its catalogue is short and clear, covers almost the whole fleet and works only with sealed, leak-free batteries. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.

### Manufacturer's warranty

The Fulbat FP12-80 comes with the **manufacturer's official warranty** against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.

### How to make it last longer

Check the float voltage of the UPS or charger: a voltage that is too high shortens the life of a sealed battery. Charge with a charger that has an AGM mode: it limits the voltage and protects the glass-fibre separators.

### When you get it and how to return it

Orders placed **before 6:00 pm** with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 1 to 2 working days; for the Balearic Islands and the rest of the European Union allow 1 to 5 working days. You have **14 days** to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.

## Frequently asked questions

### Is the FP12-80 model AGM? What does this technology offer?

Yes. AGM (Absorbent Glass Mat) technology, 80 Ah and 12 V: sealed lead-acid, with the electrolyte held in glass fibre. Its advantages: more charge/discharge cycles than a conventional battery and better heat tolerance.

### What size is this battery?

Measure the battery tray before ordering: a one-millimetre difference is enough for the hold-down clamp not to close. It measures 260×168×214 mm in length × width × height, with the terminals included in the height.

### Which side is the positive terminal on this battery?

It has the positive on the left (polarity). It must match your current battery: reversed polarity means lengthening cables or reconfiguring the system, with a risk of short circuit. Put it in front of you, terminals towards you: the post with the red ring and the + sign is the positive.


## Technical team (editorial authorship)

The FAQs, guides and comparisons on this site are reviewed by the baterias.com technical team — automotive battery specialists since 2012.

→ https://baterias.com/gb/technical-team

---
*baterias.com — Automotive batteries · 2026-11-20*
