# Lawnmower battery Fulbat U1-12 SLA 12V 32Ah 400A AGM

![Lawnmower battery Fulbat U1-12 SLA 12V 32Ah 400A AGM](https://baterias.com/6170-home_default/battery-fulbat-u1-12-sla-12v-32ah-400a.jpg)

> Fulbat U1-12 SLA lawnmower battery 12V 32Ah 400A AGM. Lawn & Garden SLA range. Dimensions 195×125×176 mm, + terminal on the left. For garden machinery.

**Category:** [Lawnmower Batteries](https://baterias.com/gb/lawnmower-batteries) → [FULBAT](https://baterias.com/gb/fulbat)

- **Canonical URL**: https://baterias.com/gb/battery-fulbat-u1-12-sla-12v-32ah-400a
- **Language**: en-GB
- **Brand**: FULBAT
- **Reference**: BCOM-FULBAT-U1-12 SLA
- **MPN**: U1-12 SLA
- **Last updated**: 2026-10-02
- **Stock**: Out of stock

## Technical specifications

| Feature | Value |
|---|---|
| Brand | FULBAT |
| Model | FULBAT Lawn & Garden SLA |
| Voltage (V) | 12 V |
| Largo | 195 mm |
| Ancho | 125 mm |
| Alto | 176 mm |
| Tecnología | AGM |
| Terminal layout | Positive left |
| Cold cranking amps (EN) | 400 A |
| Capacity (C20) | 32 Ah |

## Quick description

**Fulbat U1-12 SLA 12V 32Ah 400A** is a starter battery for lawnmowers and garden machinery, sized to crank reliably after months of storage.

## Why this lawnmower battery?

- **Same JIS reference** as your bike's original — fits first time
- **Sealed and ready to use** no acid handling, no refills
- **Survives winter storage** holds charge through long off-season

🔌 Voltage
12 V

⚡ Capacity
32 Ah C20

🔋 Cold cranking
400 A EN-1

📏 Dimensions
195×125×176 mm

⚙️ Technology
AGM

🧭 Polarity
Positive on the left

🏷️ Model
FULBAT Lawn & Garden SLA

#️⃣ Mfr. reference
U1-12 SLA

## Description

## Lawn mower battery Fulbat U1-12 SLA 32Ah 400A 12V

12*V* Voltage
32*Ah* Capacity
400*A* Cold cranking

With **32 Ah** and **400 A** of cold cranking current (EN), the **Fulbat U1-12 SLA** starts ride-on mowers, tillers and garden machinery after months of storage. Measuring 195 × 125 × 176 mm and the positive terminal on the left, it is the direct replacement for ride-on mowers fitted from the factory with a 32 Ah battery of this format.
- Sealed and maintenance-free.
- Direct replacement for the original battery.
- AGM: faster recharging and better cycle resistance than a conventional battery.
- Resistant to garden-engine vibration.

### What the Fulbat U1-12 SLA is for

Designed for ride-on mowers, tillers and garden machinery, the Fulbat U1-12 SLA is a compact, maintenance-free replacement.

### Size, terminals and hold-down of the Fulbat U1-12 SLA

The Fulbat U1-12 SLA is made in the 195 × 125 × 176 mm format. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.

### Technology inside the Fulbat U1-12 SLA

Fulbat builds the U1-12 SLA to the same standards as the rest of its catalogue; what changes between references is capacity, format and terminal position.
AGM (Absorbent Glass Mat) technology seals the electrolyte in glass microfibre. The result is a maintenance-free battery that is highly vibration-resistant and able to withstand deep discharges that would ruin a classic lead-acid battery.

### What Fulbat does differently

French brand Fulbat is a European reference in motorcycle, garden and leisure batteries: compact ranges, clear JIS codes and a consistent quality that workshops know well. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.

### Warranty and coverage

The Fulbat U1-12 SLA comes with the **manufacturer's official warranty** against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.

### How to make it last longer

Charge with a charger that has an AGM mode: it limits the voltage and protects the glass-fibre separators. Disconnect or remove the battery over winter and give it a maintenance charge before storing it.

### Delivery times and returns

Orders placed **before 6:00 pm** with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 1 to 2 working days; for the Balearic Islands and the rest of the European Union allow 1 to 5 working days. You have **14 days** to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.

## Frequently asked questions

### Is the Fulbat U1-12 SLA an AGM battery and what are the benefits of AGM?

Yes: the U1-12 SLA from Fulbat uses AGM (Absorbent Glass Mat) technology, a sealed lead-acid battery whose electrolyte soaks a glass-fibre mat. Its advantages: more charge/discharge cycles than a conventional battery and better heat tolerance. It is also required in trucks with advanced Start-Stop and regenerative braking.

### Is the U1-12 SLA model suitable for Start-Stop trucks?

AGM batteries support advanced Start-Stop and regenerative braking thanks to their higher cycle count. The Fulbat U1-12 SLA is AGM, so yes, it is designed for Start-Stop trucks. It works once fitted; on most modern trucks, registering it via OBD is advisable so the alternator applies the optimum charging profile. As a rule: EFB for basic Start-Stop, AGM when there is also regenerative braking (more cycles); in any case, what the truck manufacturer specifies.

### How long does the Fulbat U1-12 SLA battery last?

As a rough estimate, the Fulbat U1-12 SLA typically lasts 5 to 7 years in lorry use, even with high power draw while parked; it is a guide figure, not a guaranteed period. Actual lifespan varies with climate (cold starts, heat evaporating the electrolyte), with usage and short journeys, with the condition of the alternator and charging system, with power draw while parked and with maintenance; the type of truck and Start-Stop also count.

### What are the measurements of the U1-12 SLA model?

Before buying, measure the space in your truck: one extra millimetre can stop the hold-down clamp from closing. The Fulbat U1-12 SLA takes up 195×125×176 mm (length, width and height, terminals included).

### What polarity does the Fulbat U1-12 SLA battery have?

Polarity of the Fulbat U1-12 SLA: positive on the left. Seen from the front, terminals towards you, the positive (+) is the post with the red ring. Compare it with the battery you are replacing: if it does not match, cables must be lengthened or the system reconfigured, with a risk of short circuit.

### Is the U1-12 SLA valid for my vehicle?

The quickest way is to enter your number plate in the finder: DGT/DVLA/KBA detect model and engine. You can also look at the "Compatible vehicles" tab, verified by our technical team, or send us make, model, engine and year on WhatsApp; we answer during business hours (Mon–Fri 10:00–13:30 and 16:30–18:00 (Spanish time, CET)). The truck manufacturer's specifications always take priority over our tables. The U1-12 SLA typically fits a wide range of European vehicles thanks to its standard DIN case format.

### What are the equivalents of the U1-12 SLA model?

See the "Equivalents" section of this page for the recommended options at the same performance level. Mind the technology: in Start-Stop trucks an EFB is not swapped for a conventional battery. A battery interchangeable with the Fulbat U1-12 SLA must match it on dimensions (195×125×176 mm), polarity (positive on the left), capacity (32 Ah) and cranking current (400 A).

### What advantages does the Fulbat U1-12 SLA AGM battery offer over an EFB?

The absorbent glass-fibre mat of an AGM retains the electrolyte, so it cannot leak and withstands considerably more cycles than a conventional battery. Hence it is recommended for advanced Start-Stop with regenerative braking, such as BMW EfficientDynamics, Mercedes Eco, Audi MHEV, Land Rover ECO or Volvo i-Stop, and it handles tilting, vibration and extreme temperatures better than an EFB. Capacity of the U1-12 SLA: 32 Ah.

### Do I need to register the Fulbat U1-12 SLA on the truck after installation?

It is not strictly necessary on most trucks, because the alternator detects the change and adapts the charge. The advisable step is to register it via OBD: the charging profile is optimum from the first minute and the battery lasts longer, especially on brands with sophisticated BMS (BMW, Mercedes, Audi, Volvo, Land Rover). Any garage with an OBD scanner can do it in a few minutes. If you prefer to do it yourself: VCDS / Carista (VAG), Bimmercode (BMW) or iCarsoft. Even if you do not register the Fulbat U1-12 SLA, the truck will start correctly; the profile adjusts within a few days.


## Technical team (editorial authorship)

The FAQs, guides and comparisons on this site are reviewed by the baterias.com technical team — automotive battery specialists since 2012.

→ https://baterias.com/gb/technical-team

---
*baterias.com — Automotive batteries · 2026-11-21*
