# Start-Stop battery Fulmen FK1060 12V 106Ah 950A AGM

![Start-Stop battery Fulmen FK1060 12V 106Ah 950A AGM](https://baterias.com/3746-home_default/battery-fulmen-fk1060-12v-106ah-950a.jpg)

> Fulmen FK1060 Start-Stop battery 12V 106Ah 950A AGM. Dimensions 392×175×190 mm, + terminal on the right. For Start-Stop vehicles.

**Category:** [Car batteries equipped with start stop system](https://baterias.com/gb/car-batteries-equipped-with-start-stop-system) → [Fulmen](https://baterias.com/gb/fulmen)

- **Canonical URL**: https://baterias.com/gb/battery-fulmen-fk1060-12v-106ah-950a
- **Language**: en-GB
- **Brand**: Fulmen
- **Reference**: BCOM-FULMEN-FK1060
- **EAN**: 3661024047432
- **MPN**: FK1060
- **Stock**: Out of stock

## Technical specifications

| Feature | Value |
|---|---|
| Brand | FULMEN |
| Reference | FK1060 |
| Model | FULMEN AGM |
| Voltage (V) | 12 V |
| Largo | 392 mm |
| Ancho | 175 mm |
| Alto | 190 mm |
| Peso | 29 kg |
| Tecnología | AGM |
| EAN | 3661024047432 |
| Terminal layout | Positive terminal on the right |
| Hold down | B13 |
| Cold cranking amps (EN) | 950 A |
| Capacity (C20) | 106 Ah (c20) |
| Case type | L06 |

## Quick description

**Fulmen FK1060 12V 106Ah 950A** is a dedicated Start-Stop battery with AGM/EFB technology. Withstands intensive cycling at traffic-light stops (hundreds of cranks per day), recharges quickly while driving and keeps comfort loads alive during long idle periods.

### Why this Start-Stop battery?

- **Designed for Start-Stop** built for the intensive cycling of modern cars
- **2 to 3 times longer life** vs fitting a cheap conventional battery
- **Fast recovery** recharges in minutes once the engine is running

🔌 Voltage
12 V

⚡ Capacity
106 Ah C20

🔋 Cold cranking
950 A EN-1

📏 Dimensions
392×175×190 mm

⚙️ Technology
AGM

🧭 Polarity
Positive on the right

⚖️ Weight
29 kg

🏷️ Model
FULMEN AGM

## Description

## Start-Stop battery Fulmen FK1060 106Ah 950A 12V

12*V* Voltage
106*Ah* Capacity
950*A* Cold cranking
29*kg* Weight

The **Fulmen FK1060** with AGM technology delivers the **106 Ah** at **12 V** and **950 A** of cold cranking current (EN) that cars with Start-Stop, regenerative braking and heavy electrical loads need. It replaces the original battery without adaptation in Start-Stop cars with a 392 × 175 × 190 mm format: same 106 Ah capacity and the positive terminal on the right.
- Compatible with regenerative braking and energy management (BMS).
- Up to three times the cycles of a conventional battery.
- AGM technology: absorbed electrolyte, no spills, can be mounted at an angle.
- Withstands hundreds of starts a day without degrading.

### What the Fulmen FK1060 is for

With 106 Ah, the Fulmen FK1060 is the replacement for cars with Start-Stop, regenerative braking and heavy electrical loads. After the swap it may be necessary to register the new battery in the ECU so that energy management works correctly. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 29 kg and B13 hold-down.

### Will it fit your current battery tray?

The Fulmen FK1060 is made in the 392 × 175 × 190 mm format and weighs 29 kg. The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B13 hold-down, the system that anchors and connects it in the vehicle. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.

### Fulmen: the maker behind the FK1060

With more than a century of history, Fulmen offers complete ranges for cars, trucks, motorcycles and leisure with the industrial quality of the Exide group. All the Fulmen batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.

### Technology inside the Fulmen FK1060

Fulmen builds the FK1060 to the same standards as the rest of its catalogue; what changes between references is capacity, format and terminal position.
In an AGM battery the electrolyte is absorbed in glass-fibre separators: there is no free liquid, it cannot spill and it can be mounted at an angle. That construction lowers internal resistance, speeds up recharging and multiplies cycle life compared with a conventional battery.

### How to make it last longer

Do not mix technologies: a conventional battery in a Start-Stop car degrades within months. In a Start-Stop car the battery is controlled by the ECU; after replacing it, the new battery may need to be registered so the system adjusts charging.

### Manufacturer's warranty

The Fulmen FK1060 comes with the **manufacturer's official warranty**. To keep it valid, always fit the same technology as the original battery (AGM or EFB) and register the replacement if your vehicle requires it.

### Shipping, delivery and returns

Order **before [[ks:cutoff]]** with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have **[[ks:return_days]] days** to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.

## Frequently asked questions

### Is the Fulmen FK1060 an AGM battery and what are the benefits of AGM?

Yes. The FK1060 from Fulmen uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for cars with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions.

### Is the FK1060 model suitable for Start-Stop cars?

Yes. As AGM technology it is designed for Start-Stop vehicles. AGM batteries support advanced Start-Stop and regenerative braking thanks to their higher cycle count. EFB is recommended for basic Start-Stop; AGM is recommended when regenerative braking is also present, thanks to its higher cycle capability. It works straight out of the box — on most modern vehicles registering the battery via OBD is recommended so the alternator automatically applies the optimal charging profile.

### How is the Fulmen FK1060 battery installed in the vehicle?

In most cars it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On cars with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

### How long does the Fulmen FK1060 battery last?

Expected lifespan of the Fulmen FK1060 is 5 to 8 years in mild-climate car use with Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

### What are the dimensions of the Fulmen FK1060 battery?

Dimensions (length × width × height) are 392×175×190 mm — also written as 392x175x190 mm and correspond to the European L6 case size — following the European DIN standard. Always measure the space in your car before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

### Will the Fulmen FK1060 battery fit my car?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The FK1060 fits 149 verified vehicle versions in our database.

### Which batteries are equivalent to the Fulmen FK1060?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop cars. See the "Equivalents" section to view recommended options at the same performance level.

### Why choose AGM instead of EFB for my Start-Stop car?

AGM (Absorbent Glass Mat) technology uses absorbent fibreglass that retains the electrolyte, eliminating leaks and allowing up to 3× more charge/discharge cycles than a conventional battery. It is the recommended option when the car has advanced Start-Stop with regenerative braking (BMW EfficientDynamics, Mercedes Eco, Audi MHEV, Land Rover ECO, Volvo i-Stop). Withstands tilted positions, high vibration and extreme temperatures better than EFB. The Fulmen FK1060 is fully original and meets European EN 50342-6 standards for advanced Start-Stop.

### Do I need to register the Fulmen FK1060 on the car after installation?

On most cars it is not strictly necessary — the alternator detects the new battery and adapts the charge automatically. It is recommended to register the battery via OBD so that the alternator applies the optimal charging profile from the first minute and extends the battery life as much as possible (especially on brands with sophisticated BMS: BMW, Mercedes, Audi, Volvo, Land Rover). Any workshop with an OBD scanner (~10-15 € labour) does it in 5 minutes. DIY apps: VCDS / Carista (VAG), Bimmercode (BMW), iCarsoft. If you do not register, the car will still start correctly — the alternator just takes a few days to adjust the profile. The Fulmen FK1060 ships factory-charged at 80-90% so you can use it straight after fitting.


## Compatible vehicles

This battery fits 149 vehicles. Most searched:

- [BMW 5 (G30, F90) (2016)](https://baterias.com/gb/car-batteries/bmw/5-g30-f90)
- [BMW 5 Touring (F11) (2009)](https://baterias.com/gb/car-batteries/bmw/5-touring-f11)
- [CITROËN JUMPER II Van (2006)](https://baterias.com/gb/car-batteries/citroen/jumper-ii-van)
- [BMW 5 (F10) (2009)](https://baterias.com/gb/car-batteries/bmw/5-f10)
- [MERCEDES-BENZ S-CLASS (W222, V222, X222) (2013)](https://baterias.com/gb/car-batteries/mercedes-benz/s-class-w222-v222-x222)
- [CITROËN JUMPER II Platform/Chassis (2006)](https://baterias.com/gb/car-batteries/citroen/jumper-ii-platformchassis)
- [CITROËN JUMPER II Bus (2006)](https://baterias.com/gb/car-batteries/citroen/jumper-ii-bus)
- [AUDI A6 C6 (4F2) (2004)](https://baterias.com/gb/car-batteries/audi/a6-c6-4f2)
- [FIAT DUCATO Van (250\_) (2006)](https://baterias.com/gb/car-batteries/fiat/ducato-van-250)
- [FIAT DUCATO Bus (250\_) (2006)](https://baterias.com/gb/car-batteries/fiat/ducato-bus-250)
- [PEUGEOT BOXER Van (2006)](https://baterias.com/gb/car-batteries/peugeot/boxer-van)
- [BENTLEY BENTAYGA (4V1) (2015)](https://baterias.com/gb/car-batteries/bentley/bentayga-4v1)

## Equivalent batteries

- [EXIDE EK1060](https://baterias.com/gb/battery-exide-ek1060-12v-106ah-950a)
- [TUDOR TK1060](https://baterias.com/gb/battery-tudor-tk1060-12v-106ah-950a)

## Technical team (editorial authorship)

The FAQs, guides and comparisons on this site are reviewed by the baterias.com technical team — over 25 years of experience validating automotive batteries.

→ https://baterias.com/gb/technical-team

---
*baterias.com — Automotive batteries · 2026-09-30*