# Start-Stop battery Fulmen FL752 12V 75Ah 730A EFB

![Start-Stop battery Fulmen FL752 12V 75Ah 730A EFB](https://baterias.com/3768-home_default/battery-fulmen-fl752-12v-75ah-730a.jpg)

> Fulmen FL752 Start-Stop battery 12V 75Ah 730A EFB. Dimensions 315×175×175 mm, + terminal on the right. For Start-Stop vehicles.

**Category:** [Car batteries equipped with start stop system](https://baterias.com/gb/car-batteries-equipped-with-start-stop-system) → [Fulmen](https://baterias.com/gb/fulmen)

- **Canonical URL**: https://baterias.com/gb/battery-fulmen-fl752-12v-75ah-730a
- **Language**: en-GB
- **Brand**: Fulmen
- **Reference**: BCOM-FULMEN-FL752
- **EAN**: 3661024046329
- **MPN**: FL752
- **Stock**: Out of stock

## Technical specifications

| Feature | Value |
|---|---|
| Brand | FULMEN |
| Reference | FL752 |
| Model | FULMEN EFB |
| Voltage (V) | 12 V |
| Largo | 315 mm |
| Ancho | 175 mm |
| Alto | 175 mm |
| Peso | 18.6 kg |
| Tecnología | EFB |
| EAN | 3661024046329 |
| Terminal layout | Positive terminal on the right |
| Terminal type | 1 |
| Hold down | B13 |
| Cold cranking amps (EN) | 730 A |
| Capacity (C20) | 75 Ah (c20) |
| Case type | LB4 |

## Quick description

**Fulmen FL752 12V 75Ah 730A** is a battery designed specifically for Start-Stop vehicles. Withstands up to 3× more start cycles than a conventional battery and maintains performance with BMS and regenerative braking systems.

### Why this Start-Stop battery?

- **Designed for Start-Stop** built for the intensive cycling of modern cars
- **2 to 3 times longer life** vs fitting a cheap conventional battery
- **Fast recovery** recharges in minutes once the engine is running

🔌 Voltage
12 V

⚡ Capacity
75 Ah C20

🔋 Cold cranking
730 A EN-1

📏 Dimensions
315×175×175 mm

⚙️ Technology
EFB

🧭 Polarity
Positive on the right

⚖️ Weight
18,6 kg

🏷️ Model
FULMEN EFB

## Description

## Start-Stop battery Fulmen FL752 75Ah 730A 12V

12*V* Voltage
75*Ah* Capacity
730*A* Cold cranking
18.60*kg* Weight

The **Fulmen FL752 Start-Stop battery** offers **12 V**, **75 Ah** and **730 A** of cold cranking current (EN) with EFB technology, and is built for cars with Start-Stop, regenerative braking and heavy electrical loads. It measures 315 × 175 × 175 mm and the positive terminal on the right, the format sought by anyone replacing a 75 Ah battery in Start-Stop cars.
- Up to three times the cycles of a conventional battery.
- Compatible with regenerative braking and energy management (BMS).
- Withstands hundreds of starts a day without degrading.
- EFB technology: reinforced electrolyte for many more start cycles.

### What the Fulmen FL752 is for

In Start-Stop cars the battery works far harder than in a conventional car; the Fulmen FL752 is built for that intensive cycling and to recharge quickly on the move. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 18.60 kg, 1 terminals and B13 hold-down.

### Dimensions, polarity and mounting

It has external dimensions of 315 × 175 × 175 mm and weighs 18.60 kg. The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B13 hold-down and 1 terminals, the system that anchors and connects it in the vehicle. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.

### Why choose Fulmen batteries

With more than a century of history, Fulmen offers complete ranges for cars, trucks, motorcycles and leisure with the industrial quality of the Exide group. We guarantee that every Fulmen arrives new, charged and with the manufacturer's full warranty.

### Technology inside the Fulmen FL752

Fulmen builds the FL752 to the same standards as the rest of its catalogue; what changes between references is capacity, format and terminal position.
EFB combines the robustness of the flooded battery with improved plates and separators. The result is a clearly longer service life in vehicles that start and stop constantly.

### Usage and maintenance tips

Do not mix technologies: a conventional battery in a Start-Stop car degrades within months. If the vehicle only does very short trips, a periodic maintenance charge with an AGM/EFB-compatible charger greatly extends its life.

### Manufacturer's warranty

The Fulmen FL752 comes with the **manufacturer's official warranty**. To keep it valid, always fit the same technology as the original battery (AGM or EFB) and register the replacement if your vehicle requires it.

### Delivery times and returns

Same-day dispatch from our warehouse for in-stock orders placed **before [[ks:cutoff]]**: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for **[[ks:return_days]] days** if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.

## Frequently asked questions

### Is the Fulmen FL752 an EFB battery? When is EFB used?

Yes. The FL752 is an EFB (Enhanced Flooded Battery): flooded lead-acid reinforced with plate additives. Withstands more cycles than a conventional but fewer than an AGM. Fitted to cars with basic Start-Stop (no regenerative braking). More affordable than an equivalent AGM, lifespan 4-6 years.

### Is the Fulmen FL752 battery suitable for Start-Stop?

Yes. As EFB technology it is designed for Start-Stop vehicles. EFB batteries cover basic Start-Stop (no regenerative braking). EFB is recommended for basic Start-Stop; AGM is recommended when regenerative braking is also present, thanks to its higher cycle capability. It works straight out of the box — on most modern vehicles registering the battery via OBD is recommended so the alternator automatically applies the optimal charging profile.

### How is the Fulmen FL752 battery installed in the vehicle?

In most cars it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On cars with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

### What is the service life of the FL752 model?

Expected lifespan of the Fulmen FL752 is 4 to 6 years in basic Start-Stop car use. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

### What are the dimensions of the Fulmen FL752 battery?

Dimensions (length × width × height) are 315×175×175 mm — also written as 315x175x175 mm and correspond to the European LB4 case size — following the European DIN standard. Always measure the space in your car before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

### Is the FL752 valid for my vehicle?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The FL752 fits 67 verified vehicle versions in our database.

### Which batteries are equivalent to the Fulmen FL752?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop cars. See the "Equivalents" section to view recommended options at the same performance level.

### What exactly is an EFB battery like the Fulmen FL752?

An EFB (Enhanced Flooded Battery) is a flooded lead-acid battery reinforced with plate additives (carbon and polyethylene) and thicker grids. It withstands twice the cycles of a conventional battery and handles deep discharges better, but less than an AGM. It is the original fitment on cars with basic Start-Stop (no regenerative braking): Renault Energy TCe, Peugeot/Citroën PureTech, Fiat MultiAir, Hyundai/Kia ISG, Ford EcoBoost. If your car came with EFB from the factory, this is the correct battery — upgrading to AGM is optional (marginal improvement). If it came with AGM, EFB may fall short: better fit AGM. The Fulmen FL752 is original and meets EN 50342-6.

### Do I need to register the Fulmen FL752 on the car after installation?

On most cars it is not strictly necessary — the alternator detects the new battery and adapts the charge automatically. It is recommended to register the battery via OBD so that the alternator applies the optimal charging profile from the first minute and extends the battery life as much as possible (especially on brands with sophisticated BMS: BMW, Mercedes, Audi, Volvo, Land Rover). Any workshop with an OBD scanner (~10-15 € labour) does it in 5 minutes. DIY apps: VCDS / Carista (VAG), Bimmercode (BMW), iCarsoft. If you do not register, the car will still start correctly — the alternator just takes a few days to adjust the profile. The Fulmen FL752 ships factory-charged at 80-90% so you can use it straight after fitting.


## Compatible vehicles

This battery fits 67 vehicles. Most searched:

- [FORD MONDEO V Saloon (CD) (2012)](https://baterias.com/gb/car-batteries/ford/mondeo-v-saloon-cd)
- [FORD KUGA II (DM2) (2012)](https://baterias.com/gb/car-batteries/ford/kuga-ii-dm2)
- [FORD C-MAX II (DXA/CB7, DXA/CEU) (2010)](https://baterias.com/gb/car-batteries/ford/c-max-ii-dxacb7-dxaceu)

## Equivalent batteries

- [TUDOR TL752](https://baterias.com/gb/battery-tudor-tl752-75ah-730a)
- [VARTA E46](https://baterias.com/gb/battery-varta-e46-efb-12v-75ah-730a)
- [EXIDE EL752](https://baterias.com/gb/battery-exide-el752-12v-75ah-730a)
- [KRONOBAT PE-75-EFB](https://baterias.com/gb/best-price-battery-12v-75ah-efb-pe-75-efb)

## Technical team (editorial authorship)

The FAQs, guides and comparisons on this site are reviewed by the baterias.com technical team — over 25 years of experience validating automotive batteries.

→ https://baterias.com/gb/technical-team

---
*baterias.com — Automotive batteries · 2026-10-03*
