# Stationary UPS battery Long WP12-BS 12V 10Ah AGM

![Stationary UPS battery Long WP12-BS 12V 10Ah AGM](https://baterias.com/1356-home_default/battery-long-wp12-bs-12v-10ah.jpg)

> Long WP12-BS stationary UPS battery 12V 10Ah AGM. Starting Series range. Dimensions 151×88×132 mm. Long float life for UPS, alarms and standby equipment.

**Category:** [Car Batteries](https://baterias.com/gb/car-batteries) → [LONG](https://baterias.com/gb/long)

- **Canonical URL**: https://baterias.com/gb/battery-long-wp12-bs-12v-10ah
- **Language**: en-GB
- **Brand**: LONG
- **Reference**: BCOM-LONG-WP12-BS
- **MPN**: WP12-BS
- **Last updated**: 2026-10-28
- **Stock**: Out of stock

## Technical specifications

| Feature | Value |
|---|---|
| Brand | LONG |
| Reference | WP12-BS |
| Model | Starting Series |
| Voltage (V) | 12 V |
| Largo | 151 mm |
| Ancho | 88 mm |
| Alto | 132 mm |
| Peso | 4.26 kg |
| Tecnología | AGM |
| Capacity (C20) | 10 Ah (c20) |
| Capacity (C5) | 8.5 Ah (c5) |

## Quick description

**Long WP12-BS 12V 10Ah** is a stationary battery for backup power systems: UPS, alarms, telecom and emergency lighting. Long float-life under permanent charge and instant response to mains outages with no noticeable voltage drop.

## Why this stationary battery?

- **Instant response** when the mains drop, no voltage dip
- **Long life under 24/7 charge** optimised for permanent service
- **Compatible with your system** existing UPS units and alarm control panels

🔌 Voltage
12 V

⚡ Capacity
10 Ah C20

📏 Dimensions
151×88×132 mm

⚙️ Technology
AGM

⚖️ Weight
4,26 kg

🏷️ Model
Starting Series

## Description

## Car battery Long WP12-BS Starting Series 10Ah 12V

12*V* Voltage
10*Ah* Capacity
4.26*kg* Weight

With **10 Ah** at **12 V**, the **Long WP12-BS** from the **Starting Series** range is a starter battery built for passenger cars with conventional starting, without a Start-Stop system. It measures 151 × 88 × 132 mm, the format sought by anyone replacing a 10 Ah battery in cars.
- Reliable cold starts, even after weeks without driving.
- AGM technology: absorbed electrolyte, no spills, can be mounted at an angle.
- Original-equipment build quality without the dealership price.
- Direct replacement for the original battery in size and terminals.

### What the Long WP12-BS is for

Designed for passenger cars with conventional starting, without a Start-Stop system, the Long WP12-BS is the direct replacement when your vehicle uses a 10 Ah battery of this format. Before buying, compare dimensions, terminals and capacity with the battery you are replacing. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 4.26 kg.

### Dimensions, polarity and mounting

The Long WP12-BS is made in the 151 × 88 × 132 mm format and weighs 4.26 kg. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.

### The Long WP12-BS: Starting Series range and AGM technology

The **Starting Series** is the Long range the WP12-BS belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.
AGM means the acid is held in a glass mat instead of floating free. That is why the battery can be installed in the cabin without gases, survives more cycles and recovers its charge quickly.

### Long: the maker behind the WP12-BS

Long batteries combine large-scale production with ISO quality standards and a batch-to-batch consistency that has made them the de-facto standard in backup systems and electric mobility. We guarantee that every Long arrives new, charged and with the manufacturer's full warranty.

### Warranty and coverage

The Long WP12-BS comes with the **manufacturer's official warranty** against manufacturing defects; the exact period is stated in the brand's conditions. If it fails through a defect within the period, we replace it free of charge.

### Care and maintenance

Avoid leaving lights or accessories on with the engine off: most batteries fail not through defects but through repeated deep discharges. Charge with a charger that has an AGM mode: it limits the voltage and protects the glass-fibre separators.

### When you get it and how to return it

Order **before 6:00 pm** with stock available and it leaves today: mainland Spain and Portugal receive it in 1 to 2 working days, the islands and the rest of the EU in 1 to 5 days. You have **14 days** to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.

## Frequently asked questions

### Is this battery AGM? What is it for?

Yes, it is AGM. In an AGM battery such as the WP12-BS, the electrolyte is not free but absorbed in a glass-fibre mat inside a sealed lead-acid battery. Its advantages: more charge/discharge cycles than a conventional battery and better heat tolerance. It is also required in cars with advanced Start-Stop and regenerative braking.

### Is the WP12-BS model suitable for Start-Stop cars?

Yes. It is a AGM battery of 10 Ah, designed for vehicles with Start-Stop. AGM batteries support advanced Start-Stop and regenerative braking thanks to their higher cycle count. Basic Start-Stop: EFB. Start-Stop with regenerative braking: AGM, which withstands more cycles. Check the handbook for the technology the car manufacturer requires. Once fitted it is ready to go; registering it via OBD, advisable on most modern models, lets the alternator charge with the optimum profile.

### How is the Long WP12-BS battery installed in the vehicle?

Steps: 1) switch off and remove the key; 2) find the battery (bonnet, boot or under a seat); 3) undo the negative (−), then the positive (+); 4) remove the clamp and the old battery; 5) fit the new one facing the same way to match the polarity; 6) connect the positive (+) and finally the negative (−). Allow 15-30 minutes and a 10 mm spanner. If the car keeps its battery in the boot or under a seat, it can take up to twice as long. Before you start, check the car handbook: the manufacturer's procedure always comes first. Our full step-by-step guide is on the blog.

### What is the service life of the WP12-BS model?

Estimated lifespan of the Long WP12-BS: 5 to 8 years in mild-climate car use with Start-Stop. Treat it as an approximate guide, as every case is different. Actual lifespan varies with climate (cold starts, heat evaporating the electrolyte), with usage and short journeys, with the condition of the alternator and charging system, with power draw while parked and with maintenance; the type of car and Start-Stop also count.

### What are the dimensions of the Long WP12-BS battery?

Length × width × height: 151x88x132 mm. Height is measured to the top of the terminals. Measure your car's battery tray first; if the battery exceeds it by even a millimetre, the hold-down clamp may not close.

### Will the Long WP12-BS battery fit my car?

The quickest way is to enter your number plate in the finder: DGT/DVLA/KBA detect model and engine. You can also look at the "Compatible vehicles" tab, verified by our technical team, or send us make, model, engine and year on WhatsApp; we answer during business hours (Mon–Fri 10:00–13:30 and 16:30–18:00 (Spanish time, CET)). If our table and the car handbook disagree, go with what the manufacturer says.

### Which batteries are equivalent to the Long WP12-BS?

Not just any technology will do: an EFB cannot be replaced with a conventional battery in Start-Stop cars. The "Equivalents" section further down lists the recommended alternatives. A direct equivalent needs what this WP12-BS offers: 151×88×132 mm, the same Ah and CCA and AGM technology.

### What advantages does the Long WP12-BS AGM battery offer over an EFB?

Many more charge/discharge cycles than a conventional battery and no leaks: that is what AGM technology brings, with the electrolyte absorbed in glass fibre. It is the recommended choice for advanced Start-Stop with regenerative braking (BMW EfficientDynamics, Mercedes Eco, Audi MHEV, Land Rover ECO, Volvo i-Stop) and copes better than an EFB with tilting, vibration and extreme temperatures.

### Is there anything to do after replacing a Start-Stop battery?

Advisable, yes; essential, on most cars, no. Registering it via OBD makes the alternator charge with the optimum profile from the first minute and extends battery life, which matters most on brands with sophisticated BMS such as BMW, Mercedes, Audi, Volvo or Land Rover. Without registration the car starts normally; the alternator simply takes a few days to adjust the profile. A workshop only needs an OBD scanner and a few minutes. DIY apps: VCDS / Carista (VAG), Bimmercode (BMW), iCarsoft.


## Technical team (editorial authorship)

The FAQs, guides and comparisons on this site are reviewed by the baterias.com technical team — automotive battery specialists since 2012.

→ https://baterias.com/gb/technical-team

---
*baterias.com — Automotive batteries · 2026-11-22*
