# Stationary UPS battery Ritar HR12-96W 12V 24Ah AGM ![Stationary UPS battery Ritar HR12-96W 12V 24Ah AGM](https://baterias.com/769-home_default/battery-ritar-hr12-96w-12v-24ah.jpg) > Ritar HR12-96W stationary UPS battery 12V 24Ah AGM. HR range. Dimensions 166×175×125 mm. Long float life for UPS, alarms and standby equipment. **Category:** [Batteries for UPS / High Discharge UPS](https://baterias.com/gb/batteries-for-sai-ups-of-high-discharge) → [RITAR](https://baterias.com/gb/ritar) - **Canonical URL**: https://baterias.com/gb/battery-ritar-hr12-96w-12v-24ah - **Language**: en-GB - **Brand**: RITAR - **Reference**: BCOM-RITAR-HR12-96W - **MPN**: HR12-96W - **Price**: 133,70 € - **Stock**: Out of stock ## Technical specifications | Feature | Value | |---|---| | Brand | RITAR | | Reference | HR12-96 W | | Model | RITAR HR | | Voltage (V) | 12 V | | Largo | 166 mm | | Ancho | 175 mm | | Alto | 125 mm | | Tecnología | AGM | | Terminal type | F13(M5) | | Capacity (C20) | 24 Ah (c20) | ## Quick description **Ritar HR12-96W 12V 24Ah** is a stationary battery for backup power systems: UPS, alarms, telecom and emergency lighting. Long float-life under permanent charge and instant response to mains outages with no noticeable voltage drop. ### Why this stationary battery? - **Instant response** when the mains drop, no voltage dip - **Long life under 24/7 charge** optimised for permanent service - **Compatible with your system** existing UPS units and alarm control panels 🔌 Voltage 12 V ⚡ Capacity 24 Ah C20 📏 Dimensions 166×175×125 mm ⚙️ Technology AGM ⚖️ Weight 8,1 kg 🏷️ Model RITAR HR ## Description ## Stationary battery Ritar HR12-96W HR 24Ah 12V 12*V* Voltage 24*Ah* Capacity 8.10*kg* Weight The **Ritar HR12-96W** with AGM technology is a **24 Ah**, **12 V** backup battery for UPS, alarms, telecoms and emergency lighting. It replaces the original battery without adaptation in UPS, alarm and emergency systems with a 166 × 175 × 125 mm format: same 24 Ah capacity. - Sealed and gas-free: suitable for cabinets and offices. - Maintenance-free for its whole service life. - AGM technology: absorbed electrolyte, no spills, can be mounted at an angle. - Long float life under permanent charge. ### Size, terminals and hold-down of the Ritar HR12-96W The Ritar HR12-96W is made in the 166 × 175 × 125 mm format and weighs 8.10 kg. It uses F13(M5) terminals, the system that anchors and connects it in the vehicle. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters. ### What the Ritar HR12-96W is for Designed for UPS, alarms, telecoms and emergency lighting, the Ritar HR12-96W is sealed, gas-free and suitable for technical cabinets and offices. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 8.10 kg and F13(M5) terminals. ### The Ritar HR12-96W: HR range and AGM technology The **HR** is the Ritar range the HR12-96W belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle. AGM (Absorbent Glass Mat) technology seals the electrolyte in glass microfibre. The result is a maintenance-free battery that is highly vibration-resistant and able to withstand deep discharges that would ruin a classic lead-acid battery. ### What Ritar does differently With more than twenty years making sealed lead batteries, Ritar offers general-purpose, long-life, high-rate and front-terminal ranges for every stationary application. We guarantee that every Ritar arrives new, charged and with the manufacturer's full warranty. ### Manufacturer's warranty The Ritar HR12-96W comes with the **manufacturer's official warranty** against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you. ### Care and maintenance Check the float voltage of the UPS or charger: a voltage that is too high shortens the life of a sealed battery. Replace all the batteries in the set at once and avoid environments continuously above 25 °C. ### When you get it and how to return it Order **before [[ks:cutoff]]** with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have **[[ks:return_days]] days** to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email. ## Frequently asked questions ### Is this battery AGM? What is it for? Yes. The HR12-96W from Ritar uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for devices with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions. ### How do I fit the HR12-96W model in my device? In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile. ### How many years does this battery last? Expected lifespan of the Ritar HR12-96W is 5 to 8 years in mild-climate device use with Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured. ### What are the measurements of the HR12-96W model? Dimensions (length × width × height) are 166×175×125 mm — also written as 166x175x125 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals. ### Which batteries are equivalent to the Ritar HR12-96W? Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level. ## Reviews - **Average rating**: 4.82 / 5 (20 reviews) ## Technical team (editorial authorship) The FAQs, guides and comparisons on this site are reviewed by the baterias.com technical team — over 25 years of experience validating automotive batteries. → https://baterias.com/gb/technical-team --- *baterias.com — Automotive batteries · 2026-10-03*