Fulbat FDCT6-185 · Traction battery 6V 185Ah

Traction battery Fulbat FDCT6-185 6V 185Ah
search
  • Traction battery Fulbat FDCT6-185 6V 185Ah

Specifications

BrandFULBAT
Part numberFDCT6-185
Voltage (V)6V
Capacity (C20)185Ah
TechnologyLead-acid
Length243mm
Width189mm
Height248mm
Terminal layoutPositive left
See the full specifications →

This product is priced on demand to offer you the best available price at all times.

Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.

Thank you

Fulbat FDCT6-185 6V 185Ah is a traction battery for industrial electric vehicles: forklifts, pallet trucks, elevating platforms, cleaning machines (scrubbers) and golf buggies. Built for deep discharges and 8-hour continuous work cycles.

Why this traction battery?

  • Industrial designbuilt for 8 hours of continuous daily work
  • Deep discharges without damagefully recovers when recharged
  • Long industrial lifespanpays back the investment over time
Voltage
6 V
Capacity
185 Ah C20
Dimensions
243×189×248 mm
Technology
Lead-acid
Polarity
Positive on the left
Free quote, no obligation

Request a quote for your Traction battery Fulbat FDCT6-185 6V 185Ah

  • Reply in under 24 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Logo Fulbat

Golf cart battery Fulbat FDCT6-185 185Ah 6V

6VVoltage
185AhCapacity

With 185 Ah with conventional lead-acid technology, the Fulbat FDCT6-185 withstands the daily deep discharges of golf carts and electric utility vehicles. Measuring 243 × 189 × 248 mm and the positive terminal on the left, it is the direct replacement for golf carts fitted from the factory with a 185 Ah battery of this format.

  • Good balance of capacity, cranking power and price.
  • Reinforced plate construction for intensive use.
  • Long service life in daily duty cycles.
  • Standard format for golf carts and utility vehicles.

What the Fulbat FDCT6-185 is for

Designed for golf carts and electric utility vehicles, the Fulbat FDCT6-185 withstands intensive seasonal use with a reinforced plate construction. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has EN terminals.

Size, terminals and hold-down of the Fulbat FDCT6-185

It has external dimensions of 243 × 189 × 248 mm. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses EN terminals, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.

Why choose Fulbat batteries

Fulbat has manufactured in France since 1978 and specialises in motorcycles and light vehicles. Its catalogue is short and clear, covers almost the whole fleet and works only with sealed, leak-free batteries. All the Fulbat batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.

Technology inside the Fulbat FDCT6-185

The FDCT6-185 is one of the Fulbat references for this type of use; it shares the same manufacturing and quality-control criteria as the rest of the brand's catalogue.

Conventional lead-acid is the benchmark against which other technologies are compared: good cranking current, great tolerance to alternator charging and the best price per amp-hour.

How to make it last longer

Always replace all the batteries in the bank at once and use the charger specified by the vehicle manufacturer. Recharge the set fully after each round and avoid routine discharges below 20%.

Warranty and coverage

The Fulbat FDCT6-185 comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.

When you get it and how to return it

Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.

BCOM-FULBAT-FDCT6-185

Data sheet

Brand
FULBAT
Model
FULBAT FDC Deep Cycle Tubular
Voltage (V)
6V
Length
243mm
Width
189mm
Height
248mm
Technology
Lead-acid
Terminal layout
Positive left
Terminal type
EN
Capacity (C20)
185Ah

Specific References

MPN
FDCT6-185

Recommended accessories — complement the Fulbat FDCT6-185 with a charger or tester

How to change the battery

Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.

⏱ 10-15 min🛠 Tools: Screwdriver or small wrench (3-5 mm typical) · Protective gloves
  1. Step 1. Power off and unplug the device

    Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.

  2. Step 2. Locate the battery compartment

    Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.

  3. Step 3. Disconnect the negative (−) first

    With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.

  6. Step 6. Fit the new battery

    Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.

  7. Step 7. Connect the positive (+) first

    On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.

  8. Step 8. Initial charge before first use

    Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.

Frequently asked questions

How is the Fulbat FDCT6-185 battery installed in the vehicle?

In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

How long does the Fulbat FDCT6-185 battery last?

Expected lifespan of the Fulbat FDCT6-185 is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the measurements of the FDCT6-185 model?

Dimensions (length × width × height) are 243×189×248 mm — also written as 243x189x248 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Which interchangeable batteries are there for this one?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,900 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.