Fulbat FLP12-100 · Mobility scooter battery 12.8V 100Ah LiFePO4
Specifications
| Brand | FULBAT |
|---|---|
| Part number | FLP12-100 |
| Voltage (V) | 12.80V |
| Capacity (C20) | 100Ah |
| Technology | LiFePO4 |
| Length | 326mm |
| Width | 171.70mm |
| Height | 212mm |
| Terminal layout | Positive left |
This product is priced on demand to offer you the best available price at all times.
Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.
Thank you
Fulbat FLP12-100 12.8V 100Ah is a traction battery for industrial electric vehicles: forklifts, pallet trucks, elevating platforms, cleaning machines (scrubbers) and golf buggies. Built for deep discharges and 8-hour continuous work cycles.
Why this traction battery?
- Industrial designbuilt for 8 hours of continuous daily work
- Deep discharges without damagefully recovers when recharged
- Long industrial lifespanpays back the investment over time
Voltage
12.8 V
Capacity
100 Ah
Dimensions
326×172×212 mm
Technology
Lithium (LiFePO4)
Polarity
Positive on the left
Free quote, no obligation
Request a quote for your Mobility scooter battery Fulbat FLP12-100 12.8V 100Ah LiFePO4
- Reply in under 24 working hours
- Best price guaranteed
Floor cleaning machine battery Fulbat FLP12-100 100Ah 12.8V
12.8VVoltage
100AhCapacity
The Fulbat FLP12-100 with LiFePO4 lithium technology delivers 100 Ah at 12.8 V, shift after shift, in scrubber-dryers, sweepers and industrial cleaning machines. Measuring 326 × 171 × 212 mm and the positive terminal on the left, it is the direct replacement for scrubbers and sweepers fitted from the factory with a 100 Ah battery of this format.
- No maintenance, no water top-ups.
- Direct replacement for the machine's original battery.
- Built-in BMS protecting the battery and the vehicle.
- Resistant to deep discharges and daily recharging.
What the Fulbat FLP12-100 is for
Designed for scrubber-dryers, sweepers and industrial cleaning machines, the Fulbat FLP12-100 is sealed and safe in machines that tilt and turn. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has BOLT-M6 terminals.
Dimensions, polarity and mounting
It has external dimensions of 326 × 171 × 212 mm. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses BOLT-M6 terminals, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.
Technology inside the Fulbat FLP12-100
The FLP12-100 is one of the Fulbat references for this type of use; it shares the same manufacturing and quality-control criteria as the rest of the brand's catalogue.
A LiFePO4 battery starts with the same nominal voltage as a lead-acid one but with far less weight and a service life several times longer. It requires a lithium-compatible charger.
Fulbat: the maker behind the FLP12-100
French brand Fulbat is a European reference in motorcycle, garden and leisure batteries: compact ranges, clear JIS codes and a consistent quality that workshops know well. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.
Official warranty
The Fulbat FLP12-100 comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.
Care and maintenance
Store the battery at 50-70% charge if it will be unused for months. Recharge the machine at the end of each shift and avoid repeated full discharges.
Shipping, delivery and returns
Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.
BCOM-FULBAT-FLP12-100
Data sheet
- Brand
- FULBAT
- Model
- FULBAT FLP Cyclic LiFePO4
- Voltage (V)
- 12.80V
- Length
- 326mm
- Width
- 171.70mm
- Height
- 212mm
- Technology
- LiFePO4
- Terminal layout
- Positive left
- Terminal type
- BOLT-M6
- Capacity (C20)
- 100Ah
Specific References
- MPN
- FLP12-100
Recommended accessories
How to change the battery
Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.
Step 1. Power off and unplug the device
Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.
Step 2. Locate the battery compartment
Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.
Step 3. Disconnect the negative (−) first
With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.
Step 6. Fit the new battery
Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.
Step 7. Connect the positive (+) first
On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.
Step 8. Initial charge before first use
Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.
Frequently asked questions
How is the Fulbat FLP12-100 battery installed in the vehicle?
In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How long does the Fulbat FLP12-100 battery last?
Expected lifespan of the Fulbat FLP12-100 is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the measurements of the FLP12-100 model?
Dimensions (length × width × height) are 326×172×212 mm — also written as 326x172x212 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Which batteries are equivalent to the Fulbat FLP12-100?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.