Fulbat FLP12-84/100L · Mobility scooter battery 12.8V 100Ah LiFePO4

Mobility scooter battery Fulbat FLP12-84/100L 12.8V 100Ah LiFePO4
search
  • Mobility scooter battery Fulbat FLP12-84/100L 12.8V 100Ah LiFePO4

Specifications

BrandFULBAT
Part numberFLP12-84/100L
Voltage (V)12.80V
Capacity (C20)100Ah
TechnologyLiFePO4
Length260mm
Width169mm
Height218mm
Terminal layoutPositive left
See the full specifications →
€313.39
VAT included
Quantity

  • 24-48h delivery
  • 14-day returns
  • Secure payment
  • +11,900 reviews

Brand FULBAT Reference FLP12-84/100L

Fulbat FLP12-84/100L 12.8V 100Ah is a traction battery for industrial electric vehicles: forklifts, pallet trucks, elevating platforms, cleaning machines (scrubbers) and golf buggies. Built for deep discharges and 8-hour continuous work cycles.

Why this traction battery?

  • Industrial designbuilt for 8 hours of continuous daily work
  • Deep discharges without damagefully recovers when recharged
  • Long industrial lifespanpays back the investment over time
Voltage
12.8 V
Capacity
100 Ah C20
Dimensions
260×169×218 mm
Technology
Lithium (LiFePO4)
Polarity
Positive on the left
Logo Fulbat

Floor cleaning machine battery Fulbat FLP12-84/100L 100Ah 12.8V

12.8VVoltage
100AhCapacity

The Fulbat FLP12-84/100L with LiFePO4 lithium technology delivers 100 Ah at 12.8 V, shift after shift, in scrubber-dryers, sweepers and industrial cleaning machines. Measuring 260 × 169 × 218 mm and the positive terminal on the left, it is the direct replacement for scrubbers and sweepers fitted from the factory with a 100 Ah battery of this format.

  • No maintenance, no water top-ups.
  • Direct replacement for the machine's original battery.
  • Built-in BMS protecting the battery and the vehicle.
  • Resistant to deep discharges and daily recharging.

What the Fulbat FLP12-84/100L is for

With 100 Ah, the Fulbat FLP12-84/100L powers brushes, vacuum and traction of scrubber-dryers, sweepers and industrial cleaning machines throughout the day. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has BOLT-M6 terminals.

Size, terminals and hold-down of the Fulbat FLP12-84/100L

The Fulbat FLP12-84/100L is made in the 260 × 169 × 218 mm format. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses BOLT-M6 terminals, the system that anchors and connects it in the vehicle. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.

Technology inside the Fulbat FLP12-84/100L

Within the Fulbat catalogue, the FLP12-84/100L is the 100 Ah model designed for this application.

LiFePO4 chemistry is the safest of the lithium batteries: thermally stable, cobalt-free and good for thousands of cycles, protected by its electronic management system.

What Fulbat does differently

French brand Fulbat is a European reference in motorcycle, garden and leisure batteries: compact ranges, clear JIS codes and a consistent quality that workshops know well. We guarantee that every Fulbat arrives new, charged and with the manufacturer's full warranty.

Manufacturer's warranty

The Fulbat FLP12-84/100L comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.

How to make it last longer

Check the electrolyte level if the battery allows it and replace the complete set when changing batteries. Store the battery at 50-70% charge if it will be unused for months.

Delivery times and returns

Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.

BCOM-FULBAT-FLP12-84/100L

Data sheet

Brand
FULBAT
Model
FULBAT FLP Cyclic LiFePO4
Voltage (V)
12.80V
Length
260mm
Width
169mm
Height
218mm
Technology
LiFePO4
Terminal layout
Positive left
Terminal type
BOLT-M6
Capacity (C20)
100Ah

Specific References

MPN
FLP12-84/100L

Recommended accessories — complement the Fulbat FLP12-84/100L with a charger or tester

How to change the battery

Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.

⏱ 10-15 min🛠 Tools: Screwdriver or small wrench (3-5 mm typical) · Protective gloves
  1. Step 1. Power off and unplug the device

    Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.

  2. Step 2. Locate the battery compartment

    Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.

  3. Step 3. Disconnect the negative (−) first

    With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.

  6. Step 6. Fit the new battery

    Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.

  7. Step 7. Connect the positive (+) first

    On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.

  8. Step 8. Initial charge before first use

    Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.

Frequently asked questions

How is the Fulbat FLP12-84/100L battery installed in the vehicle?

In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

How many years does this battery last?

Expected lifespan of the Fulbat FLP12-84/100L is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the measurements of the FLP12-84/100L model?

Dimensions (length × width × height) are 260×169×218 mm — also written as 260x169x218 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Which batteries are equivalent to the Fulbat FLP12-84/100L?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,900 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.