Which battery does the Cesab ECO KD 20 take?

The Cesab ECO KD 20 uses the battery shown on this page. Check voltage, capacity and dimensions before ordering. If there is no published price, ask for a quote and we reply the same day.

Can I fit a higher-capacity battery in my Cesab ECO KD 20?

Yes, as long as it has the same voltage, fits in the battery compartment and the Cesab ECO KD 20 charger is compatible. More capacity (Ah) means more run time; changing the voltage or battery type without adapting the charger can damage the equipment.

How many batteries does my equipment take and how are they connected?

Many machines run at 24, 36 or 48 V with several 6, 8 or 12 V batteries connected in series (voltages add up; the Ah capacity is that of one unit). The model page tells you how many units it takes. Always replace the whole set with identical batteries of the same age.

Can I use a car battery instead of a deep-cycle one?

Not advisable. A starter battery delivers a lot of current for a few seconds; a deep-cycle battery has thick plates built to be discharged to 50-80% and recharged every day. In traction, cleaning or mobility equipment a starter battery lasts very few cycles.

What if the reference has no price?

Some references are not published in the shop: click "Request a quote" and we reply the same working day with price and lead time. Those with a price can be bought online and ship the same day if you order before 6:00 pm.

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analysing your browsing habits. To consent to their use, click the “I accept” button.

More information about cookies

Functional cookies

Yes

Description and cookies

Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.

Cookie	Provider	Purpose	Expiry
PHP_SESSID	baterias.com	The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser.	Session
PrestaShop-#	baterias.com	This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop.	480 hours

Advertising Cookies

Yes

Description

These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.

Analytics cookies

Yes

Description and cookies

Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.

Cookie	Provider	Purpose	Expiry
ANONCHK	Microsoft (Clarity)	Auxiliary Microsoft cookies used to synchronise the identifier across its domains.	10 minutes
CLID	Microsoft (Clarity)	Identify the browser’s first visit to the website in Clarity.	1 year
MR	Microsoft (Clarity)	Auxiliary Microsoft cookies used to synchronise the identifier across its domains.	7 days
MUID	Microsoft (Clarity)	Identify unique browsers across Microsoft services.	1 year
SM	Microsoft (Clarity)	Auxiliary Microsoft cookies used to synchronise the identifier across its domains.	Session
_clck	Microsoft (Clarity)	Store Clarity’s pseudonymous identifier to recognise visits from the same browser.	1 year
_clsk	Microsoft (Clarity)	Group the pages viewed into the same Clarity session.	1 day

Performance cookies

Yes

Description

These are used to improve the browsing experience and optimize the operation of the shop.

Other cookies

Yes

Description

These are cookies without a clear purpose or those that we are still in the process of classifying.

12,164 customer reviewsThank you for trusting usThank you! Excellent 4.5 out of 5

Cesab ECO KD 20

Batteries for Cesab ECO KD 20

Elevator Batteries · Cesab

Which battery does a Cesab ECO KD 20 need?

🔧 Battery Expert Advisor

Battery analysis for your Cesab ECO KD 20

Quick answer You need an ordinary lead-acid battery of 972 Ah. Our recommendation: KRONOBAT 9 PzS 810.

KRONOBAT9 PzS 810

ordinary lead-acid972 Ah173×198×477

€0.00

Buy

Prices and availability updated on 23/10/2026

Based on the batteries we found for your vehicle, our experts help you pick the right one.

📋 What we found

For your Cesab ECO KD 20 we found 14 compatible batteries.

📏 Battery size

The list contains batteries in different sizes or capacities (Ah). In many cases both variants fit, but it's worth checking your compartment dimensions and the Ah of your original battery before buying. Choose the one with the same dimensions as your current battery: a bigger one may not fit the compartment or the hold-down. If several match your size, the higher capacity gives more headroom for cold starts.

⭐ Our recommendation

Our recommendation

For your Cesab ECO KD 20 we recommend the KRONOBAT 9 PzS 810 (ordinary lead-acid, 972 Ah). It also has the highest capacity (Ah) on the list — more autonomy to power consumers with the engine off and more reserve for prolonged loads.

See this battery →

Was this advisor helpful?

Verified selection

Class: Elevator Batteries
Brand: Cesab
Model: ECO KD 20

Before you buy: check 3 key points

Although the batteries shown are sourced from information provided by manufacturers, we recommend checking on your current battery:

Dimensions (length × width × height, including terminals and protrusions)
The dimensions shown are the maximum of the battery and include the height of the terminals, small ridges at the base and any lateral protrusions. Measure your current battery completely, from edge to edge. The new one must be the same size or slightly smaller — never larger, it would not fit in the housing.
Positive terminal (left or right viewed from the front — check the battery photo carefully)
Stand facing the battery, with the manufacturer's label facing you and the terminals on top. Locate the terminal marked with +: if it is on your right, it is "positive right"; if it is on your left, it is "positive left". Do not rely on how the battery is mounted in the car — the position is always measured looking only at the battery itself.
Technology (AGM, EFB or conventional — the same as your current battery or higher)
Depending on the manufacturer, the same technology may be labelled differently: AGM may also appear as VRLA, AGM Start-Stop or AGM Deep Cycle. EFB may appear as EF, EFB+ or Enhanced Flooded Battery. Conventional may appear as SLI, Lead-Acid, Wet or Standard. If your vehicle has Start-Stop, the battery must be AGM or EFB — never conventional.

If you have any questions, just ask us and we'll be glad to advise you with no obligation.

Conventional batteries

Standard lead-acid batteries.

14 products

Comparison table of available products
Category	Make	Reference	Capacity	Technology	Price
Conventional batteries	KRONOBAT	9 PzS 810	972 Ah	Conventional	€0.00	More info
Conventional batteries	KRONOBAT	7 PzS 630	756 Ah	Conventional	€0.00	More info
Conventional batteries	KRONOBAT	4 PzS 320	384 Ah	Conventional	€0.00	More info
Conventional batteries	KRONOBAT	5 PzS 525	630 Ah	Conventional	€0.00	More info
Conventional batteries	KRONOBAT	5 PzS 450	540 Ah	Conventional	€0.00	More info
Conventional batteries	KRONOBAT	5 PzS 575	690 Ah	Conventional	€0.00	More info
Conventional batteries	KRONOBAT	8 PzS 560	672 Ah	Conventional	€0.00	More info
Conventional batteries	KRONOBAT	8 PzS 640	768 Ah	Conventional	€0.00	More info
Conventional batteries	KRONOBAT	4 PzS 360	432 Ah	Conventional	€0.00	More info
Conventional batteries	KRONOBAT	9 PzS 630	756 Ah	Conventional	€0.00	More info
Conventional batteries	KRONOBAT	5 PzS 400	480 Ah	Conventional	€0.00	More info
Conventional batteries	KRONOBAT	8 PzS 720	864 Ah	Conventional	€0.00	More info
Conventional batteries	KRONOBAT	9 PzS 450	540 Ah	Conventional	€0.00	More info
Conventional batteries	KRONOBAT	9 PzS 540	648 Ah	Conventional	€0.00	More info

Frequently asked questions

: The Cesab ECO KD 20 uses the battery shown on this page. Check voltage, capacity and dimensions before ordering. If there is no published price, ask for a quote and we reply the same day.
: Yes, as long as it has the same voltage, fits in the battery compartment and the Cesab ECO KD 20 charger is compatible. More capacity (Ah) means more run time; changing the voltage or battery type without adapting the charger can damage the equipment.
: Many machines run at 24, 36 or 48 V with several 6, 8 or 12 V batteries connected in series (voltages add up; the Ah capacity is that of one unit). The model page tells you how many units it takes. Always replace the whole set with identical batteries of the same age.
: Not advisable. A starter battery delivers a lot of current for a few seconds; a deep-cycle battery has thick plates built to be discharged to 50-80% and recharged every day. In traction, cleaning or mobility equipment a starter battery lasts very few cycles.
: Some references are not published in the shop: click "Request a quote" and we reply the same working day with price and lead time. Those with a price can be bought online and ship the same day if you order before 6:00 pm.

Batteries for Cesab ECO KD 20

Which battery does a Cesab ECO KD 20 need?