Which battery does the Yale ERP 10 RCL take?

The Yale ERP 10 RCL uses the battery shown on this page. Check voltage, capacity and dimensions before ordering. If there is no published price, ask for a quote and we reply the same day.

Can I fit a higher-capacity battery in my Yale ERP 10 RCL?

Yes, as long as it has the same voltage, fits in the battery compartment and the Yale ERP 10 RCL charger is compatible. More capacity (Ah) means more run time; changing the voltage or battery type without adapting the charger can damage the equipment.

How many batteries does my equipment take and how are they connected?

Many machines run at 24, 36 or 48 V with several 6, 8 or 12 V batteries connected in series (voltages add up; the Ah capacity is that of one unit). The model page tells you how many units it takes. Always replace the whole set with identical batteries of the same age.

Can I use a car battery instead of a deep-cycle one?

Not advisable. A starter battery delivers a lot of current for a few seconds; a deep-cycle battery has thick plates built to be discharged to 50-80% and recharged every day. In traction, cleaning or mobility equipment a starter battery lasts very few cycles.

What if the reference has no price?

Some references are not published in the shop: click "Request a quote" and we reply the same working day with price and lead time. Those with a price can be bought online and ship the same day if you order before 6:00 pm.

12,137 customer reviewsThank you for trusting usThank you! Excellent 4.5 out of 5

Yale ERP 10 RCL

Batteries for Yale ERP 10 RCL

Elevator Batteries · Yale

Which battery does a Yale ERP 10 RCL need?

🔧 Battery Expert Advisor

Battery analysis for your Yale ERP 10 RCL

Quick answer You need an Lead-acid battery of 1200 Ah. Our recommendation: KRONOBAT 8 PzS 1000.

KRONOBAT8 PzS 1000

Lead-acid1200 Ah155×198×570

€0.00

Buy

Prices and availability updated on 21/10/2026

Based on the batteries we found for your vehicle, our experts help you pick the right one.

📋 What we found

For your Yale ERP 10 RCL we found 3 compatible batteries.

📏 Battery size

The list contains batteries in different sizes or capacities (Ah). In many cases both variants fit, but it's worth checking your compartment dimensions and the Ah of your original battery before buying. Choose the one with the same dimensions as your current battery: a bigger one may not fit the compartment or the hold-down. If several match your size, the higher capacity gives more headroom for cold starts.

⭐ Our recommendation

Our recommendation

For your Yale ERP 10 RCL we recommend the KRONOBAT 8 PzS 1000 (Lead-acid, 1200 Ah). It also has the highest capacity (Ah) on the list — more autonomy to power consumers with the engine off and more reserve for prolonged loads.

See this battery →

Was this advisor helpful?

Verified selection

Class: Elevator Batteries
Brand: Yale
Model: ERP 10 RCL

Before you buy: check 3 key points

Although the batteries shown are sourced from information provided by manufacturers, we recommend checking on your current battery:

Dimensions (length × width × height, including terminals and protrusions)
The dimensions shown are the maximum of the battery and include the height of the terminals, small ridges at the base and any lateral protrusions. Measure your current battery completely, from edge to edge. The new one must be the same size or slightly smaller — never larger, it would not fit in the housing.
Positive terminal (left or right viewed from the front — check the battery photo carefully)
Stand facing the battery, with the manufacturer's label facing you and the terminals on top. Locate the terminal marked with +: if it is on your right, it is "positive right"; if it is on your left, it is "positive left". Do not rely on how the battery is mounted in the car — the position is always measured looking only at the battery itself.
Technology (AGM, EFB or conventional — Start-Stop requires AGM or EFB)
Depending on the manufacturer, the same technology may be labelled differently: AGM may also appear as VRLA, AGM Start-Stop or AGM Deep Cycle. EFB may appear as EF, EFB+ or Enhanced Flooded Battery. Conventional may appear as SLI, Lead-Acid, Wet or Standard. If your vehicle has Start-Stop, the battery must be AGM or EFB — never conventional.

If you have any questions, just ask us and we'll be glad to advise you with no obligation.

Conventional Battery

This is a standard or conventional battery for vehicles without a start-stop system

3 products

Comparison table of available products
Category	Make	Reference	Capacity	Price
Conventional Battery	KRONOBAT	8 PzS 1000	1200 Ah	€0.00	More info
Conventional Battery	KRONOBAT	7 PzS 875	1050 Ah	€0.00	More info
Conventional Battery	KRONOBAT	8 PzS 920	1104 Ah	€0.00	More info

Frequently asked questions

: The Yale ERP 10 RCL uses the battery shown on this page. Check voltage, capacity and dimensions before ordering. If there is no published price, ask for a quote and we reply the same day.
: Yes, as long as it has the same voltage, fits in the battery compartment and the Yale ERP 10 RCL charger is compatible. More capacity (Ah) means more run time; changing the voltage or battery type without adapting the charger can damage the equipment.
: Many machines run at 24, 36 or 48 V with several 6, 8 or 12 V batteries connected in series (voltages add up; the Ah capacity is that of one unit). The model page tells you how many units it takes. Always replace the whole set with identical batteries of the same age.
: Not advisable. A starter battery delivers a lot of current for a few seconds; a deep-cycle battery has thick plates built to be discharged to 50-80% and recharged every day. In traction, cleaning or mobility equipment a starter battery lasts very few cycles.
: Some references are not published in the shop: click "Request a quote" and we reply the same working day with price and lead time. Those with a price can be bought online and ship the same day if you order before 6:00 pm.

Batteries for Yale ERP 10 RCL

Which battery does a Yale ERP 10 RCL need?