Fullriver DC80-12 · Marine battery 80Ah 630A AGM

Marine battery Fullriver DC80-12 DC 80Ah 630A 12V

The Fullriver DC80-12 with AGM technology is a marine battery with 80 Ah and 630 A of cold cranking current (EN) for motor and sailing boats, both for engine starting and onboard services. Measuring 353 × 175 × 190 mm, it is the direct replacement for boats fitted from the factory with a 80 Ah battery of this format.

• Sealed: no spills or gases in the locker.
• Resistant to humidity and salt air.
• AGM: faster recharging and better cycle resistance than a conventional battery.
• Ready for starting outboard and inboard engines.

What the Fullriver DC80-12 is for

The Fullriver DC80-12 is designed for motor and sailing boats, both for engine starting and onboard services. If it is your starter battery, run the services from a separate battery; if it is a service battery, avoid routinely discharging it beyond 50%. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 26.80 kg and AP terminals.

The Fullriver DC80-12: DC range and AGM technology

The DC80-12 is part of the Fullriver DC range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.

AGM (Absorbent Glass Mat) technology seals the electrolyte in glass microfibre. The result is a maintenance-free battery that is highly vibration-resistant and able to withstand deep discharges that would ruin a classic lead-acid battery.

Dimensions, polarity and mounting

In terms of format, the Fullriver DC80-12 measures 353 × 175 × 190 mm (length × width × height) and weighs 26.80 kg. It uses AP terminals, the system that anchors and connects it in the vehicle. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.

Why choose Fullriver batteries

Fullriver specialises in deep-cycle AGM batteries for mobility, marine, solar and traction. Its DC and HC series are known for their tolerance to deep discharge and long cycle life. We guarantee that every Fullriver arrives new, charged and with the manufacturer's full warranty.

Care and maintenance

Charge with a charger that has an AGM mode: it limits the voltage and protects the glass-fibre separators. As a service battery, avoid routine discharges below 50% to extend its cycle life.

Warranty and coverage

The Fullriver DC80-12 comes with the manufacturer's official warranty against manufacturing defects. Deep discharge from winter lay-up without charging is not covered.

Shipping, delivery and returns

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.