Cyclon 6V-E · Equipment battery 6V 8Ah AGM
Specifications
| Brand | CYCLON |
|---|---|
| Part number | 6V-E |
| Voltage (V) | 6 |
| Capacity (C20) | 8 |
| Capacity (C10) | 8.0Ah (c10) |
| Technology | AGM |
| Height | 5.41 cm |
| Weight | 1.43 Kgs |
| Model | CYCLON Battery 6V Monoblocs |
This product is priced on demand to offer you the best available price at all times.
Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.
Thank you
Cyclon 6V-E 6V 8Ah is a service battery for devices: steady output, long standby life and a compact format.
Why this equipment battery?
- Instant responsewhen the mains drop, no voltage dip
- Long life under 24/7 chargeoptimised for permanent service
- Compatible with your systemexisting UPS units and alarm control panels
Voltage
6 V
Capacity
8 Ah
Technology
AGM
Weight
1,43 kg
Model
CYCLON Battery 6V Monoblocs
Free quote, no obligation
Request a quote for your Equipment battery Cyclon 6V-E 6V 8Ah AGM
- Reply in under 24 working hours
- Best price guaranteed
Stationary battery Cyclon 6V-E Battery 6V Monoblocs 8Ah 6V
6VVoltage
8AhCapacity
1.43kgWeight
The 6 V, 8 Ah Cyclon 6V-E stationary battery from the Battery 6V Monoblocs range with AGM technology is designed for UPS, alarms, telecoms and emergency lighting. It measures 14 × 14 × 5 mm, the format sought by anyone replacing a 8 Ah battery in UPS, alarm and emergency systems.
- Long float life under permanent charge.
- AGM technology: absorbed electrolyte, no spills, can be mounted at an angle.
- Maintenance-free for its whole service life.
- Sealed and gas-free: suitable for cabinets and offices.
What the Cyclon 6V-E is for
The Cyclon 6V-E is designed for UPS, alarms, telecoms and emergency lighting: it sits on float charge and responds instantly to a mains failure. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 1.43 kg.
Size, terminals and hold-down of the Cyclon 6V-E
In terms of format, the Cyclon 6V-E measures 14 × 14 × 5 mm (length × width × height) and weighs 1.43 kg. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.
The Cyclon 6V-E: Battery 6V Monoblocs range and AGM technology
The 6V-E is part of the Cyclon Battery 6V Monoblocs range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.
In an AGM battery the electrolyte is absorbed in glass-fibre separators: there is no free liquid, it cannot spill and it can be mounted at an angle. That construction lowers internal resistance, speeds up recharging and multiplies cycle life compared with a conventional battery.
Cyclon: the maker behind the 6V-E
Cyclon (EnerSys) makes pure-lead cells with thin plates wound in a spiral: high current, great tolerance to extreme temperatures and a very long life in industrial, military and emergency applications. We guarantee that every Cyclon arrives new, charged and with the manufacturer's full warranty.
Official warranty
The Cyclon 6V-E comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.
How to make it last longer
Replace all the batteries in the set at once and avoid environments continuously above 25 °C. Check the float voltage of the UPS or charger: a voltage that is too high shortens the life of a sealed battery.
Delivery times and returns
Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.
BCOM-CYCLON-6V-E
Data sheet
- Brand
- Cyclon
- Reference
- 6V-E
- Model
- CYCLON Battery 6V Monoblocs
- Voltage (V)
- 6
- Height
- 5.41 cm
- Weight
- 1.43 Kgs
- Technology
- AGM
- Capacity (C20)
- 8
- Capacity (C10)
- 8.0Ah (c10)
- Diameter
- 13.92 cm
Specific References
- MPN
- 6V-E
Recommended accessories
How to change the battery
Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.
Step 1. Power off and unplug the device
Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.
Step 2. Locate the battery compartment
Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.
Step 3. Disconnect the negative (−) first
With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.
Step 6. Fit the new battery
Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.
Step 7. Connect the positive (+) first
On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.
Step 8. Initial charge before first use
Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.
Frequently asked questions
Is the Cyclon 6V-E an AGM battery and what are the benefits of AGM?
Yes. The 6V-E from Cyclon uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for devices with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions.
How do I change this battery step by step?
In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How long does the Cyclon 6V-E battery last?
Expected lifespan of the Cyclon 6V-E is 5 to 8 years in mild-climate device use with Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Cyclon 6V-E battery?
Dimensions (length × width × height) are 14×14×5 mm — also written as 14x14x5 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Which interchangeable batteries are there for this one?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.