Deta DG1101 StartPRO · Truck battery 110Ah 750A
Specifications
| Brand | Deta |
|---|---|
| Part number | DG1101 |
| Voltage (V) | 12 |
| Capacity (C20) | 110Ah (c20) |
| Cold cranking amps (EN) | 750A |
| Technology | Lead-acid |
| Length | 349 mm |
| Width | 175 mm |
| Height | 235 mm |
This product is priced on demand to offer you the best available price at all times.
Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.
Thank you
Deta DG1101 12V 110Ah 750A is a professional battery for heavy commercial vehicles. Withstands constant chassis vibration, supports long cold-engine cranks and keeps auxiliary services running (tachograph, heater, refrigeration, GPS) during driver's mandatory rest stops.
Why this truck battery?
- True Heavy Dutybuilt for intensive professional use
- Long cold-diesel cranksreliable even in extreme cold
- Powers services at idletachograph, heater and lights with engine off
Where it fits: the Deta DG1101 is one of our truck batteries, belongs to our Deta batteries and by capacity it sits among our 110Ah batteries.
Request a quote for your Truck battery Deta DG1101 12V 110Ah 750A
- Reply in under 24 working hours
- Best price guaranteed

Truck battery Deta DG1101 StartPRO 110Ah 750A 12V
With 110 Ah and 750 A of cold cranking current (EN), the Deta DG1101 from the StartPRO range is built for professional use in trucks, buses, tractors and heavy machinery. Measuring 349 × 175 × 235 mm and the positive terminal on the left, it is the direct replacement for trucks fitted from the factory with a 110 Ah battery of this format.
In short: the Deta DG1101 (110 Ah, 750 A, 349 × 175 × 235 mm, positive terminal on the left). Verified equivalent alternatives: Varta I5 and Tudor TG1101.
- Good balance of capacity, cranking power and price.
- Resistant to constant chassis vibration.
- Powers tachograph, fridge and heater during rest stops.
- Better tolerance to deep discharge than a conventional starter battery.
Will it fit your current battery tray?
In terms of format, the Deta DG1101 measures 349 × 175 × 235 mm (length × width × height) and weighs 25.40 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B00 hold-down, the system that anchors and connects it in the vehicle. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.
What the Deta DG1101 is for
With 110 Ah, the Deta DG1101 cranks large-displacement diesel engines in the cold and powers tachograph, fridge and heater during rest stops. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 25.40 kg and B00 hold-down.
The Deta DG1101: StartPRO range and conventional lead-acid technology
The StartPRO is the Deta range the DG1101 belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.
The conventional lead-acid battery remains the most widespread technology thanks to its balance of capacity, cranking current and price. Well maintained and kept charged, it offers years of reliable service in vehicles without Start-Stop.
Deta: the maker behind the DG1101
Deta is the German brand of the Exide group: batteries built with original-equipment technology and a very complete range for cars, Start-Stop, trucks, motorcycles and leisure. We guarantee that every Deta arrives new, charged and with the manufacturer's full warranty.
Warranty and coverage
The Deta DG1101 comes with the manufacturer's official warranty against manufacturing defects. An important note for commercial vehicles: most trucks use two batteries connected in series (24 V installation). If you replace only one, the new battery works alongside the old one, which has already lost capacity; that imbalance shortens its life and the manufacturer may treat it as misuse. Always replace both at the same time.
Care and maintenance
On batteries with filler caps, check the electrolyte level and top up only with distilled water. In 24 V installations, check periodically that both batteries show the same voltage; an imbalance means one is failing.
Shipping, delivery and returns
Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.
Data sheet
-
BrandDETA
-
ReferenceDG1101
-
ModelDETA StartPRO
-
Voltage (V)12
-
Length349 mm
-
Width175 mm
-
Height235 mm
-
Weight25.40 Kgs
-
TechnologyLead-acid
-
EAN3661024025386
-
Terminal layoutPositive terminal on the left
-
Hold-downB00
-
Cold cranking amps (EN)750A
-
Capacity (C20)110Ah (c20)
-
Case typeD02
Specific References
-
EAN133661024025386
-
MPNDG1101
Codes and references Deta DG1101
| Brand | Deta |
|---|---|
| Manufacturer range | DETA StartPRO |
| Manufacturer part number (MPN) | DG1101 |
| EAN-13 barcode | 3661024025386 |
| Dimensions (length × width × height) | 349 × 175 × 235 mm (349x175x235) |
Deta DG1101: best-selling equivalent or higher-spec batteries
The Deta DG1101 is interchangeable with these equivalent references: I5 (Varta), TG1101 (Tudor), LFS120 (Varta), EG1101 (Exide), ER550 (Exide), EN850 (Exide).
| Product | Specifications | Technology | Price | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Deta
DG1101
This battery
|
12V 110Ah 750A | Lead-acid | ||||||||||||||||||||||
Varta
I5
Varta equivalent |
12V 110Ah 680A | Lead-acid | €121.70 +€121.70 | |||||||||||||||||||||
| ||||||||||||||||||||||||
| DG1101 | I5 | |
|---|---|---|
| Capacity | 110 Ah | 110 Ah |
| Cold cranking (EN) | 750 A | 680 A |
| Technology | Lead-acid | Lead-acid |
| Dimensions (mm) | 349 × 175 × 235 | 347 × 173 × 234 |
| Positive terminal | Positive terminal on the left | Positive terminal on the left |
| Price | €121.70 |
Exide
ER550
Exide equivalent Deta DG1101 vs Exide ER550
Exide equivalent · +€123.30
Same case and same fitting as the DG1101, from Exide. Compared with the DG1101 it has 5 Ah more and 10 A of cold cranking more. It costs €123.30 more. If you want to save or the DG1101 is out of stock, it is the safe alternative: same dimensions, same polarity and official warranty.
| DG1101 | ER550 | |
|---|---|---|
| Capacity | 110 Ah | 115 Ah |
| Cold cranking (EN) | 750 A | 760 A |
| Technology | Lead-acid | Lead-acid |
| Dimensions (mm) | 349 × 175 × 235 | 349 × 175 × 235 |
| Positive terminal | Positive terminal on the left | Positive terminal on the left |
| Price | €123.30 |
Tudor
TG1101
Tudor equivalent Deta DG1101 vs Tudor TG1101
Tudor equivalent · +€180.10
It is the verified Tudor equivalent for the DG1101 tray. Compared with the DG1101 it has the same Ah and cranking power. It costs €180.10 more. Decide by price, brand preference and availability: both fit and crank the same.
| DG1101 | TG1101 | |
|---|---|---|
| Capacity | 110 Ah | 110 Ah |
| Cold cranking (EN) | 750 A | 750 A |
| Technology | Lead-acid | Lead-acid |
| Dimensions (mm) | 349 × 175 × 235 | 349 × 175 × 235 |
| Positive terminal | Positive terminal on the left | Positive terminal on the left |
| Price | €180.10 |
Varta
LFS120
Varta equivalent Deta DG1101 vs Varta LFS120
Varta equivalent · +€290.40
Same case and same fitting as the DG1101, from Varta. Compared with the DG1101 it has 10 Ah more and 30 A of cold cranking more. It costs €290.40 more. If you want to save or the DG1101 is out of stock, it is the safe alternative: same dimensions, same polarity and official warranty.
| DG1101 | LFS120 | |
|---|---|---|
| Capacity | 110 Ah | 120 Ah |
| Cold cranking (EN) | 750 A | 780 A |
| Technology | Lead-acid | Lead-acid |
| Dimensions (mm) | 349 × 175 × 235 | 349 × 175 × 236 |
| Positive terminal | Positive terminal on the left | Positive terminal on the left |
| Price | €290.40 |
Exide
EG1101
Exide equivalent Deta DG1101 vs Exide EG1101
Exide equivalent · +€184.20
It is the verified Exide equivalent for the DG1101 tray. Compared with the DG1101 it has the same Ah and cranking power. It costs €184.20 more. Decide by price, brand preference and availability: both fit and crank the same.
| DG1101 | EG1101 | |
|---|---|---|
| Capacity | 110 Ah | 110 Ah |
| Cold cranking (EN) | 750 A | 750 A |
| Technology | Lead-acid | Lead-acid |
| Dimensions (mm) | 349 × 175 × 235 | 349 × 175 × 235 |
| Positive terminal | Positive terminal on the left | Positive terminal on the left |
| Price | €184.20 |
Exide
EN850
Exide equivalent Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Other 110Ah batteries: We stock 28 models of 110 Ah to compare by price, technology and cold cranking: see all 110Ah batteries. Same size (349 × 175 × 235 mm): batteries of 349 × 175 × 235 mm.
Recommended accessories
Frequently asked questions
Why does my lorry have two batteries?
Most lorries, buses and tractors run on 24 V with two 12 V batteries connected in series. Always replace both at the same time and with the same model: if one is new and the other old, they become unbalanced and both last less.
How many years does this battery last?
Expected lifespan of the Deta DG1101 is 4 to 6 years in normal lorry use. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Deta DG1101 battery?
Dimensions (length × width × height) are 349×175×235 mm — also written as 349x175x235 mm — following the European DIN standard. Always measure the space in your truck before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Which side is the positive terminal on this battery?
Polarity: positive on the left. To identify it, place the battery in front of you with the terminals facing you and check which side the positive (+, marked with a red ring) is on. Before buying, verify the polarity matches your current battery: switching polarity forces longer cables or system reconfiguration, with short-circuit risk.
Does this battery fit my truck?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:30–18:00 (Spanish time, CET)). The DG1101 typically fits a wide range of European vehicles thanks to its standard DIN case format.
What are the equivalents of the DG1101 model?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop trucks. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.