Exide E60-N30L-A · Motorcycle battery 12V 30Ah 300A
Specifications
| Brand | EXIDE |
|---|---|
| Part number | E60-N30L-A |
| Voltage (V) | 12 |
| Capacity (C20) | 30Ah (c20) |
| Technology | Flooded |
| Length | 185.00 mm |
| Width | 130.00 mm |
| Height | 170.00 mm |
| Weight | 8.90 Kgs |
This product is priced on demand to offer you the best available price at all times.
Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.
Thank you
Exide E60-N30L-A 12V 30Ah 300A is a motorcycle starter battery with standard JIS code (the one on your bike's original label). Ready to use, sealed and vibration-resistant. Fits any model that takes the same JIS reference — the code your mechanic recognises at a glance.
Why this motorcycle battery?
- Same JIS referenceas your bike's original — fits first time
- Sealed and ready to useno acid handling, no refills
- Survives winter storageholds charge through long off-season
Voltage
12 V
Capacity
30 Ah
Cold cranking
300 A
Dimensions
185×130×170 mm
Technology
Lead-acid
Polarity
Positive on the right
Weight
8,9 kg
Model
EXIDE Conventional
Mfr. reference
E60-N30L-A
Free quote, no obligation
Request a quote for your Motorcycle battery Exide E60-N30L-A 12V 30Ah 300A
- Reply in under 24 working hours
- Best price guaranteed
Motorcycle battery Exide E60-N30L-A Conventional 30Ah 300A 12V
12VVoltage
30AhCapacity
300ACold cranking
8.90kgWeight
The Exide E60-N30L-A motorcycle battery is rated at 12 V, 30 Ah and 300 A of cold cranking current (EN) from the Conventional range, and is designed for motorcycles, scooters, quads and personal watercraft. It measures 185 × 130 × 170 mm and the positive terminal on the right, the format sought by anyone replacing a 30 Ah battery in motorcycles.
- Same JIS code as the original battery: fits first time.
- Conventional lead-acid: the most proven and economical technology.
- Energetic cranking for high-compression engines.
- Resistant to the vibration typical of two wheels.
Dimensions, polarity and mounting
The Exide E60-N30L-A is made in the 185 × 130 × 170 mm format and weighs 8.90 kg. The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B0 hold-down and M11 terminals, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.
What the Exide E60-N30L-A is for
Designed for motorcycles, scooters, quads and personal watercraft, the Exide E60-N30L-A replaces the original battery of bikes that use this code or format. Check the position of the positive terminal before ordering. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 8.90 kg, M11 terminals and B0 hold-down.
The Exide E60-N30L-A: Conventional range and conventional lead-acid technology
The E60-N30L-A is part of the Exide Conventional range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.
Conventional lead-acid is the benchmark against which other technologies are compared: good cranking current, great tolerance to alternator charging and the best price per amp-hour.
Exide: the maker behind the E60-N30L-A
Exide is one of the world's largest battery manufacturers and an original-equipment supplier to many car makers. Its European plants produce starter, industrial and leisure batteries under original-equipment quality controls. We guarantee that every Exide arrives new, charged and with the manufacturer's full warranty.
Official warranty
The Exide E60-N30L-A comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.
Care and maintenance
Check the resting voltage before the season (above 12.6 V on a charged battery) and make sure the terminals are clean and tight. If the bike spends the winter standing, connect a trickle charger: deep discharge through inactivity is the first cause of premature failure.
Delivery times and returns
Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.
BCOM-EXIDE-E60-N30L-A
Data sheet
- Brand
- EXIDE
- Reference
- E60-N30L-A
- Model
- EXIDE Conventional
- Voltage (V)
- 12
- Length
- 185.00 mm
- Width
- 130.00 mm
- Height
- 170.00 mm
- Weight
- 8.90 Kgs
- Technology
- Flooded
- EAN
- 3661024033602
- Terminal layout
- Positive terminal on the right
- Terminal type
- M11
- Hold-down
- B0
- Cold cranking amps (EN)
- 300A
- Capacity (C20)
- 30Ah (c20)
- Case type
- C68
Specific References
- EAN13
- 3661024033602
- MPN
- E60-N30L-A
Codes and references Exide E60-N30L-A
| Brand | Exide · see all batteries Exide |
|---|---|
| Manufacturer range | EXIDE Conventional |
| Manufacturer reference (MPN) | E60-N30L-A |
| EAN-13 barcode | 3661024033602 |
| Dimensions (length × width × height) | 185 × 130 × 170 mm (185x130x170) |
Comparison: Exide E60-N30L-A vs equivalents
The Exide E60-N30L-A is interchangeable with these equivalent references: E60-N30L-B (Exide).
| Product | Specifications | Technology | Price |
|---|---|---|---|
Exide
E60-N30L-A
This battery
|
12V 30Ah 300A | Lead-acid | |
Exide
E60-N30L-B
|
12V 30Ah 300A | Lead-acid | €86.70 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Recommended accessories
How to change the battery
Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.
Step 1. Prepare the vehicle
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
Step 2. Locate the battery compartment
On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.
Step 3. Disconnect the negative (−) terminal
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.
Step 6. Install the new battery
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Step 7. Connect the cables
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Step 8. Verify the engine starts
Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.
Frequently asked questions
How do I fit the E60-N30L-A model in my motorcycle?
In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How long does the Exide E60-N30L-A battery last?
Expected lifespan of the Exide E60-N30L-A is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Exide E60-N30L-A battery?
Dimensions (length × width × height) are 185×130×170 mm — also written as 185x130x170 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Will the Exide E60-N30L-A battery fit my motorcycle?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The E60-N30L-A typically fits a wide range of European vehicles thanks to its standard DIN case format.
What are the equivalents of the E60-N30L-A model?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.