Exide EF1250 PowerPRO · Truck battery 125Ah 850A

Truck battery Exide EF1250 PowerPRO 125Ah 850A 12V

With 125 Ah and 850 A of cold cranking current (EN), the Exide EF1250 from the PowerPRO range is built for professional use in trucks, buses, tractors and heavy machinery. Its 349 × 175 × 285 mm and the positive terminal on the right make it the exact replacement for the 125 Ah battery fitted as standard to many trucks.

In short: the Exide EF1250 (125 Ah, 850 A, 349 × 175 × 285 mm, positive terminal on the right). Verified equivalent alternatives: Varta J1 and Exide EG1250.

• Resistant to constant chassis vibration.
• Good balance of capacity, cranking power and price.
• Better tolerance to deep discharge than a conventional starter battery.
• Powers tachograph, fridge and heater during rest stops.

What the Exide EF1250 is for

Designed for trucks, buses, tractors and heavy machinery, the Exide EF1250 withstands constant chassis vibration and discharges during stops with active loads. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 31 kg, EN taper post terminals and B0 hold-down.

The Exide EF1250: PowerPRO range and conventional lead-acid technology

The PowerPRO is the Exide range the EF1250 belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.

Conventional lead-acid is the benchmark against which other technologies are compared: good cranking current, great tolerance to alternator charging and the best price per amp-hour.

Dimensions, polarity and mounting

It has external dimensions of 349 × 175 × 285 mm and weighs 31 kg. The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B0 hold-down and EN taper post terminals, the system that anchors and connects it in the vehicle. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.

Exide: the maker behind the EF1250

Exide is one of the world's largest battery manufacturers and an original-equipment supplier to many car makers. Its European plants produce starter, industrial and leisure batteries under original-equipment quality controls. All the Exide batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.

Usage and maintenance tips

On batteries with filler caps, check the electrolyte level and top up only with distilled water. During rest stops with active loads, avoid repeated deep discharges: they shorten the life of any starter battery.

Official warranty

The Exide EF1250 comes with the manufacturer's official warranty against manufacturing defects. An important note for commercial vehicles: most trucks use two batteries connected in series (24 V installation). If you replace only one, the new battery works alongside the old one, which has already lost capacity; that imbalance shortens its life and the manufacturer may treat it as misuse. Always replace both at the same time.

When you get it and how to return it

Orders placed before 6:00 pm with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 24-48 working hours; for the Balearic Islands and the rest of the European Union allow 3 to 5 working days. You have 14 days to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.