Exide EJ1355 · Truck battery 135Ah 1000A

Truck battery Exide EJ1355 PowerPRO Agricultura y Construction 135Ah 1,000A 12V

The Exide EJ1355 truck battery is rated at 12 V, 135 Ah and 1,000 A of cold cranking current (EN) from the PowerPRO Agricultura y Construction range, and is prepared for trucks, buses, tractors and heavy machinery. Measuring 514 × 175 × 210 mm and the positive terminal on the left, it is the direct replacement for trucks fitted from the factory with a 135 Ah battery of this format.

In short: the Exide EJ1355 (135 Ah, 1000 A, 514 × 175 × 210 mm, positive terminal on the left). Verified equivalent alternatives: Tudor TG1355 and Exide EG1355.

• Good balance of capacity, cranking power and price.
• Resistant to constant chassis vibration.
• Powers tachograph, fridge and heater during rest stops.
• Better tolerance to deep discharge than a conventional starter battery.

Vehicles compatible with the Exide EJ1355

The Exide EJ1355 is compatible with more than 557 vehicles: it is fitted as original equipment or as a replacement by brands such as Fendt, Fiat, John Deere, Massey Ferguson, Claas and Fiatallis. If you are looking for a battery for a Fendt or Fiat with these dimensions, the EJ1355 is one of the usual replacement references. Models from Volvo, Liebherr, International-Harvester, Zetor, Case, Khd, Sperry New Holland and Komatsu are added to that list. It covers 27 original-equipment references, one of the widest coverages in its format.

Will it fit your current battery tray?

In terms of format, the Exide EJ1355 measures 514 × 175 × 210 mm (length × width × height) and weighs 36 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B3 hold-down and EN taper post terminals, the system that anchors and connects it in the vehicle. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.

The Exide EJ1355: PowerPRO Agricultura y Construction range and conventional lead-acid technology

The PowerPRO Agricultura y Construction is the Exide range the EJ1355 belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.

In a conventional battery the electrolyte is liquid and the lead plates are immersed in it. It is a mature, economical and easily recycled technology, ideal for starting vehicles in normal use.

Exide: the maker behind the EJ1355

With more than a century of history, Exide Technologies manufactures automotive, marine, motorcycle and industrial batteries in Europe. Its presence as original equipment on assembly lines vouches for the quality of every reference. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.

Manufacturer's warranty

The Exide EJ1355 comes with the manufacturer's official warranty against manufacturing defects. An important note for commercial vehicles: most trucks use two batteries connected in series (24 V installation). If you replace only one, the new battery works alongside the old one, which has already lost capacity; that imbalance shortens its life and the manufacturer may treat it as misuse. Always replace both at the same time.

Care and maintenance

In 24 V installations, check periodically that both batteries show the same voltage; an imbalance means one is failing. On batteries with filler caps, check the electrolyte level and top up only with distilled water.

Delivery times and returns

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.