Exide ETX7A-BS · Motorcycle battery 12V 6Ah 90A AGM
Specifications
| Brand | EXIDE |
|---|---|
| Part number | ETX7A-BS |
| Voltage (V) | 12 |
| Capacity (C20) | 6Ah (c20) |
| Technology | AGM |
| Length | 150.00 cm |
| Width | 90.00 cm |
| Height | 95.00 cm |
| Weight | 2.50 Kgs |
€22.90
VAT included
4,83/5★★★★★32 reviewsVerified purchases
- ★★★★★David C.:
El montaje muy fácil. La batería funciona perfectamente. El servicio excelente. Recomiendo .
- ★★★★★Jose Carlos Leon:
Pedí la batería un jueves a las 4 y me llegó el viernes a las 7
- ★★★★Jose Maria Sanz:
Lo mejor, la atención al teléfono
Exide ETX7A-BS 12V 6Ah 90A is a sealed motorcycle battery ready to fit, with the JIS reference your mechanic recognises at a glance. Vibration-resistant, keeps voltage during the winter off-season and cranks first time when you take it out for a ride.
Why this motorcycle battery?
- Same JIS referenceas your bike's original — fits first time
- Sealed and ready to useno acid handling, no refills
- Survives winter storageholds charge through long off-season
JIS code
ETX7A-BS
Voltage
12 V
Capacity
6 Ah
Cold cranking
90 A
Dimensions
150×90×95 mm
Technology
AGM
Polarity
Positive on the left
Weight
2,5 kg
Model
EXIDE MOTO AGM 12V
Mfr. reference
ETX7A-BS
Motorcycle battery Exide ETX7A-BS Moto AGM 6Ah 90A 12V
12VVoltage
6AhCapacity
90ACold cranking
2.50kgWeight
With 6 Ah at 12 V and 90 A of cold cranking current (EN), the Exide ETX7A-BS with AGM technology replaces the original battery of motorcycles, scooters, quads and personal watercraft. Its 150 × 90 × 95 mm and the positive terminal on the left make it the exact replacement for the 6 Ah battery fitted as standard to many motorcycles.
- Compact and lightweight format.
- Holds its charge through winter storage.
- Sealed and ready to fit, no acid handling.
- AGM: faster recharging and better cycle resistance than a conventional battery.
What the Exide ETX7A-BS is for
The Exide ETX7A-BS is a common replacement in motorcycles, scooters, quads and personal watercraft. If your bike spends the winter standing, a trickle charger stops it reaching spring flat. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 2.50 kg, M04 terminals and B0 hold-down.
The Exide ETX7A-BS: Moto AGM range and AGM technology
Within the Exide catalogue, the Moto AGM series groups the references designed for this use. The ETX7A-BS is the 6 Ah model of that family, with the same performance as its siblings in other sizes.
AGM means the acid is held in a glass mat instead of floating free. That is why the battery can be installed in the cabin without gases, survives more cycles and recovers its charge quickly.
Size, terminals and hold-down of the Exide ETX7A-BS
In terms of format, the Exide ETX7A-BS measures 150 × 90 × 95 mm (length × width × height) and weighs 2.50 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B0 hold-down and M04 terminals, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.
Why choose Exide batteries
With more than a century of history, Exide Technologies manufactures automotive, marine, motorcycle and industrial batteries in Europe. Its presence as original equipment on assembly lines vouches for the quality of every reference. All the Exide batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.
Care and maintenance
If the bike spends the winter standing, connect a trickle charger: deep discharge through inactivity is the first cause of premature failure. Charge with a charger that has an AGM mode: it limits the voltage and protects the glass-fibre separators.
Official warranty
The Exide ETX7A-BS comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.
When you get it and how to return it
Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.
BCOM-EXIDE-ETX7A-BS
Data sheet
- Brand
- EXIDE
- Reference
- ETX7A-BS
- Model
- EXIDE MOTO AGM 12V
- Voltage (V)
- 12
- Length
- 150.00 cm
- Width
- 90.00 cm
- Height
- 95.00 cm
- Weight
- 2.50 Kgs
- Technology
- AGM
- EAN
- 3661024033817
- Terminal layout
- Positive terminal on the left
- Terminal type
- M04
- Hold-down
- B0
- Cold cranking amps (EN)
- 90A
- Capacity (C20)
- 6Ah (c20)
Specific References
- EAN13
- 3661024033817
- MPN
- ETX7A-BS
4,83/5
Verified purchasesLatest verified reviews
★★★★★David C.Verified purchase
09/09/2026Batería moto
El montaje muy fácil.
La batería funciona perfectamente.
El servicio excelente.
Recomiendo .
★★★★★Jose Carlos Leon
10/07/2026La batería llegó al día siguiente
Pedí la batería un jueves a las 4 y me llegó el viernes a las 7
★★★★★Jose Maria Sanz
03/05/2026Muy buena atención
Lo mejor, la atención al teléfono
★★★★★Jose Alvarez
21/01/2026En esta web encontré lo que buscaba
Llevaba tiempo buscando la batería a un mejor precio y aquí la encontre, llego rapido y todo bien.
★★★★★Enrique Campos
19/01/2026Excelente servicio
Me asesoraron en todo, excelente servicio
★★★★★Jose Nieto
18/01/2026Gracias por la atención
Muy buena atención. Gracias
★★★★★Salvador Mora
14/01/2026Rápido y correcto
Gracias a vosotros pude elegir la batería de coche correcta
★★★★★Jose Manuel Benitez
24/12/2025Excelente
En general todo bien
★★★★★Raul Gonzalez
23/12/2025Llega al día siguiente
Me llego en tiempo y todo bien
★★★★★Miguel PeÑa
16/11/2025Me llegó la batería en 24 horas
Pedí la bateria un jueves a las 4 y me llegó el viernes a las 2
Codes and references Exide ETX7A-BS
| Brand | Exide · see all batteries Exide |
|---|---|
| Manufacturer range | EXIDE MOTO AGM 12V |
| Manufacturer reference (MPN) | ETX7A-BS |
| EAN-13 barcode | 3661024033817 |
| Dimensions (length × width × height) | 150 × 90 × 95 mm (150x90x95) |
Comparison: Exide ETX7A-BS vs equivalents
The Exide ETX7A-BS is interchangeable with these equivalent references: AGM12-6 (Exide), 506015005 (Varta).
| Product | Specifications | Technology | Price |
|---|---|---|---|
Exide
ETX7A-BS
This battery
|
12V 6Ah 90A | AGM | €22.90 |
Exide
AGM12-6
|
12V 6Ah 90A | AGM | €46.70 |
Varta
506015005
|
12V 6Ah 105A | AGM | €33.30 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Recommended accessories
How to change the battery
Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.
Step 1. Prepare the vehicle
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
Step 2. Locate the battery compartment
On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.
Step 3. Disconnect the negative (−) terminal
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.
Step 6. Install the new battery
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Step 7. Connect the cables
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Step 8. Verify the engine starts
Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.
Frequently asked questions
Is the ETX7A-BS model AGM? What does this technology offer?
Yes. The ETX7A-BS from Exide uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for motorcycles with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions.
How is the Exide ETX7A-BS battery installed in the vehicle?
In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How long does the Exide ETX7A-BS battery last?
Expected lifespan of the Exide ETX7A-BS is 5 to 8 years in mild-climate motorcycle use with Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Exide ETX7A-BS battery?
Dimensions (length × width × height) are 150×90×95 mm — also written as 150x90x95 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Will the Exide ETX7A-BS battery fit my motorcycle?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The ETX7A-BS typically fits a wide range of European vehicles thanks to its standard DIN case format.
Which batteries are equivalent to the Exide ETX7A-BS?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.