Fulbat FB10L-B2 · Motorcycle battery 12V 11.6Ah 130A
Specifications
| Brand | FULBAT |
|---|---|
| Part number | FB10L-B2 |
| Voltage (V) | 12V |
| Capacity (C20) | 11.60Ah |
| Capacity (C10) | 11Ah (c10) |
| Technology | Lead-acid |
| Length | 135mm |
| Width | 90mm |
| Height | 145mm |
This product is priced on demand to offer you the best available price at all times.
Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.
Thank you
Fulbat FB10L-B2 12V 11,6Ah 130A is a motorcycle starter battery with standard JIS code (the one on your bike's original label). Ready to use, sealed and vibration-resistant. Fits any model that takes the same JIS reference — the code your mechanic recognises at a glance.
Why this motorcycle battery?
- Same JIS referenceas your bike's original — fits first time
- Sealed and ready to useno acid handling, no refills
- Survives winter storageholds charge through long off-season
Voltage
12 V
Capacity
11,6 Ah
Cold cranking
130 A
Dimensions
135×90×145 mm
Technology
Lead-acid
Polarity
Positive on the right
Free quote, no obligation
Request a quote for your Motorcycle battery Fulbat FB10L-B2 12V 11.6Ah 130A
- Reply in under 24 working hours
- Best price guaranteed
Motorcycle battery Fulbat FB10L-B2 11.6Ah 130A 12V
12VVoltage
11.6AhCapacity
130ACold cranking
With 11.6 Ah at 12 V and 130 A of cold cranking current (EN), the Fulbat FB10L-B2 with conventional lead-acid technology replaces the original battery of motorcycles, scooters, quads and personal watercraft. It replaces the original battery without adaptation in motorcycles with a 135 × 90 × 145 mm format: same 11.6 Ah capacity and the positive terminal on the right.
- Conventional lead-acid: the most proven and economical technology.
- Same JIS code as the original battery: fits first time.
- Resistant to the vibration typical of two wheels.
- Energetic cranking for high-compression engines.
What the Fulbat FB10L-B2 is for
Designed for motorcycles, scooters, quads and personal watercraft, the Fulbat FB10L-B2 replaces the original battery of bikes that use this code or format. Check the position of the positive terminal before ordering.
Technology inside the Fulbat FB10L-B2
Within the Fulbat catalogue, the FB10L-B2 is the 11.6 Ah model designed for this application.
Conventional lead-acid is the benchmark against which other technologies are compared: good cranking current, great tolerance to alternator charging and the best price per amp-hour.
Size, terminals and hold-down of the Fulbat FB10L-B2
In terms of format, the Fulbat FB10L-B2 measures 135 × 90 × 145 mm (length × width × height). The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.
Fulbat: the maker behind the FB10L-B2
French brand Fulbat is a European reference in motorcycle, garden and leisure batteries: compact ranges, clear JIS codes and a consistent quality that workshops know well. All the Fulbat batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.
How to make it last longer
If the bike spends the winter standing, connect a trickle charger: deep discharge through inactivity is the first cause of premature failure. On batteries with filler caps, check the electrolyte level and top up only with distilled water.
Manufacturer's warranty
The Fulbat FB10L-B2 comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.
Delivery times and returns
Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.
BCOM-FULBAT-FB10L-B2
Data sheet
- Brand
- FULBAT
- Model
- FULBAT Motorcycle DRY
- Voltage (V)
- 12V
- Length
- 135mm
- Width
- 90mm
- Height
- 145mm
- Technology
- Lead-acid
- Terminal layout
- Positive right
- Cold cranking amps (EN)
- 130A
- Capacity (C20)
- 11.60Ah
- Capacity (C10)
- 11Ah (c10)
Specific References
- MPN
- FB10L-B2
Comparison: Fulbat FB10L-B2 vs equivalents
The Fulbat FB10L-B2 is interchangeable with these equivalent references: FB10L-A2/B2 GEL (Fulbat).
| Product | Specifications | Technology | Price |
|---|---|---|---|
Fulbat
FB10L-B2
This battery
|
|||
Fulbat
FB10L-A2/B2 GEL
|
€73.63 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Recommended accessories
How to change the battery
Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.
Step 1. Prepare the vehicle
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
Step 2. Locate the battery compartment
On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.
Step 3. Disconnect the negative (−) terminal
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.
Step 6. Install the new battery
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Step 7. Connect the cables
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Step 8. Verify the engine starts
Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.
Frequently asked questions
How is the Fulbat FB10L-B2 battery installed in the vehicle?
In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How long does the Fulbat FB10L-B2 battery last?
Expected lifespan of the Fulbat FB10L-B2 is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What size is this battery?
Dimensions (length × width × height) are 135×90×145 mm — also written as 135x90x145 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Does this battery fit my motorcycle?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The FB10L-B2 typically fits a wide range of European vehicles thanks to its standard DIN case format.
What are the equivalents of the FB10L-B2 model?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.