Fulbat FB16AL-A2 · Motorcycle battery 12V 16.8Ah 210A
Specifications
| Brand | FULBAT |
|---|---|
| Part number | FB16AL-A2 |
| Voltage (V) | 12V |
| Capacity (C20) | 16.80Ah |
| Capacity (C10) | 16Ah (c10) |
| Technology | Lead-acid |
| Length | 207mm |
| Width | 71mm |
| Height | 164mm |
This product is priced on demand to offer you the best available price at all times.
Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.
Thank you
Fulbat FB16AL-A2 12V 16,8Ah 210A is a motorcycle starter battery with standard JIS code (the one on your bike's original label). Ready to use, sealed and vibration-resistant. Fits any model that takes the same JIS reference — the code your mechanic recognises at a glance.
Why this motorcycle battery?
- Same JIS referenceas your bike's original — fits first time
- Sealed and ready to useno acid handling, no refills
- Survives winter storageholds charge through long off-season
Voltage
12 V
Capacity
16,8 Ah
Cold cranking
210 A
Dimensions
207×71×164 mm
Technology
Lead-acid
Polarity
Positive on the right
Free quote, no obligation
Request a quote for your Motorcycle battery Fulbat FB16AL-A2 12V 16.8Ah 210A
- Reply in under 24 working hours
- Best price guaranteed
Motorcycle battery Fulbat FB16AL-A2 16.8Ah 210A 12V
12VVoltage
16.8AhCapacity
210ACold cranking
The Fulbat FB16AL-A2 is a motorcycle battery with 16.8 Ah and 210 A of cold cranking current (EN), designed for motorcycles, scooters, quads and personal watercraft. Measuring 207 × 71 × 164 mm and the positive terminal on the right, it is the direct replacement for motorcycles fitted from the factory with a 16.8 Ah battery of this format.
- Good balance of capacity, cranking power and price.
- Sealed and ready to fit, no acid handling.
- Holds its charge through winter storage.
- Compact and lightweight format.
What the Fulbat FB16AL-A2 is for
Designed for motorcycles, scooters, quads and personal watercraft, the Fulbat FB16AL-A2 replaces the original battery of bikes that use this code or format. Check the position of the positive terminal before ordering.
Technology inside the Fulbat FB16AL-A2
Fulbat builds the FB16AL-A2 to the same standards as the rest of its catalogue; what changes between references is capacity, format and terminal position.
The conventional lead-acid battery remains the most widespread technology thanks to its balance of capacity, cranking current and price. Well maintained and kept charged, it offers years of reliable service in vehicles without Start-Stop.
Will it fit your current battery tray?
In terms of format, the Fulbat FB16AL-A2 measures 207 × 71 × 164 mm (length × width × height). The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.
What Fulbat does differently
Fulbat has manufactured in France since 1978 and specialises in motorcycles and light vehicles. Its catalogue is short and clear, covers almost the whole fleet and works only with sealed, leak-free batteries. We guarantee that every Fulbat arrives new, charged and with the manufacturer's full warranty.
Care and maintenance
Check the resting voltage before the season (above 12.6 V on a charged battery) and make sure the terminals are clean and tight. On batteries with filler caps, check the electrolyte level and top up only with distilled water.
Official warranty
The Fulbat FB16AL-A2 comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.
Delivery times and returns
Orders placed before 6:00 pm with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 24-48 working hours; for the Balearic and Canary Islands and the rest of the European Union allow 3 to 5 working days. You have 14 days to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.
BCOM-FULBAT-FB16AL-A2
Data sheet
- Brand
- FULBAT
- Model
- FULBAT Motorcycle DRY
- Voltage (V)
- 12V
- Length
- 207mm
- Width
- 71mm
- Height
- 164mm
- Technology
- Lead-acid
- Terminal layout
- Positive right
- Cold cranking amps (EN)
- 210A
- Capacity (C20)
- 16.80Ah
- Capacity (C10)
- 16Ah (c10)
Specific References
- MPN
- FB16AL-A2
Comparison: Fulbat FB16AL-A2 vs equivalents
The Fulbat FB16AL-A2 is interchangeable with these equivalent references: FB16AL-A2 GEL (Fulbat).
| Product | Specifications | Technology | Price |
|---|---|---|---|
Fulbat
FB16AL-A2
This battery
|
|||
Fulbat
FB16AL-A2 GEL
|
€105.25 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Recommended accessories
How to change the battery
Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.
Step 1. Prepare the vehicle
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
Step 2. Locate the battery compartment
On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.
Step 3. Disconnect the negative (−) terminal
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.
Step 6. Install the new battery
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Step 7. Connect the cables
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Step 8. Verify the engine starts
Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.
Frequently asked questions
How do I fit the FB16AL-A2 model in my motorcycle?
In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How many years does this battery last?
Expected lifespan of the Fulbat FB16AL-A2 is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the measurements of the FB16AL-A2 model?
Dimensions (length × width × height) are 207×71×164 mm — also written as 207x71x164 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Will the Fulbat FB16AL-A2 battery fit my motorcycle?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The FB16AL-A2 typically fits a wide range of European vehicles thanks to its standard DIN case format.
Which interchangeable batteries are there for this one?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.