Fulbat FL-RM02 · Lawnmower battery 25.6V 3Ah LiFePO4

Lawnmower battery Fulbat FL-RM02 25.6V 3Ah LiFePO4 | baterias.com
search
  • Lawnmower battery Fulbat FL-RM02 25.6V 3Ah LiFePO4 | baterias.com
  • Lawnmower battery Fulbat FL-RM02 25.6V 3Ah LiFePO4 | baterias.com

Specifications

BrandFULBAT
Part numberFL-RM02
Voltage (V)25.60V
Capacity (C20)3Ah
TechnologyLiFePO4
Length212mm
Width164mm
Height108mm
ModelFULBAT Robot Mower
See the full specifications →

This product is priced on demand to offer you the best available price at all times.

Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.

Thank you

Fulbat FL-RM02 25V 3Ah is a starter battery for lawnmowers and garden machinery, sized to crank reliably after months of storage.

Why this lawnmower battery?

  • Same JIS referenceas your bike's original — fits first time
  • Sealed and ready to useno acid handling, no refills
  • Survives winter storageholds charge through long off-season
Voltage
25 V
Capacity
3 Ah C20
Dimensions
212×164×108 mm
Technology
LIFEPO4
Model
FULBAT Robot Mower
Mfr. reference
FL-RM02
Free quote, no obligation

Request a quote for your Lawnmower battery Fulbat FL-RM02 25.6V 3Ah LiFePO4

  • Reply in under 24 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Logo Fulbat

Lawn mower battery Fulbat FL-RM02 3Ah 25.6V

25.6VVoltage
3AhCapacity

The Fulbat FL-RM02 battery is rated at 25.6 V, 3 Ah and is designed for ride-on mowers, tillers and garden machinery. Measuring 212 × 164 × 108 mm, it is the direct replacement for ride-on mowers fitted from the factory with a 3 Ah battery of this format.

  • Built-in BMS protecting the battery and the vehicle.
  • Resistant to garden-engine vibration.
  • Sealed and maintenance-free.
  • Direct replacement for the original battery.

What the Fulbat FL-RM02 is for

Designed for ride-on mowers, tillers and garden machinery, the Fulbat FL-RM02 is a compact, maintenance-free replacement.

Technology inside the Fulbat FL-RM02

Fulbat builds the FL-RM02 to the same standards as the rest of its catalogue; what changes between references is capacity, format and terminal position.

A LiFePO4 battery starts with the same nominal voltage as a lead-acid one but with far less weight and a service life several times longer. It requires a lithium-compatible charger.

Dimensions, polarity and mounting

It has external dimensions of 212 × 164 × 108 mm. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.

Why choose Fulbat batteries

Fulbat has manufactured in France since 1978 and specialises in motorcycles and light vehicles. Its catalogue is short and clear, covers almost the whole fleet and works only with sealed, leak-free batteries. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.

Usage and maintenance tips

Store the battery at 50-70% charge if it will be unused for months. Check the voltage before the first start of the season and clean the terminals.

Warranty and coverage

The Fulbat FL-RM02 comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.

Shipping, delivery and returns

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.

BCOM-FULBAT-FL-RM02

Data sheet

Brand
FULBAT
Model
FULBAT Robot Mower
Voltage (V)
25.60V
Length
212mm
Width
164mm
Height
108mm
Technology
LiFePO4
Capacity (C20)
3Ah
Energy (Wh)
76.80Wh

Specific References

MPN
FL-RM02

Recommended accessories — complement the Fulbat FL-RM02 with a charger or tester

How to change the battery

Guide to replace a truck battery in 30-60 minutes. Truck batteries weigh 25-50 kg — we recommend working in pairs and using a carrying strap.

⏱ 30-60 min🛠 Tools: 13 mm or 17 mm wrench (depending on make) · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery

    Open the bonnet. The battery is usually in the engine bay, but in many modern cars it may be in the boot or under the passenger seat. Check the manual if you cannot find it.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery (two people)

    Loosen the bottom hold-down clamp. Truck batteries weigh 25-50 kg — lift in pairs with gloves and a carrying strap. Forcing the lift alone risks back injury.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify the engine starts

    Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.

Frequently asked questions

How is the Fulbat FL-RM02 battery installed in the vehicle?

In most trucks it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On trucks with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

How long does the Fulbat FL-RM02 battery last?

Expected lifespan of the Fulbat FL-RM02 is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the measurements of the FL-RM02 model?

Dimensions (length × width × height) are 212×164×108 mm — also written as 212x164x108 mm — following the European DIN standard. Always measure the space in your truck before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Is the FL-RM02 valid for my vehicle?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The FL-RM02 typically fits a wide range of European vehicles thanks to its standard DIN case format.

Which batteries are equivalent to the Fulbat FL-RM02?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop trucks. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,900 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.