Fulbat FPC12-40 · Mobility scooter battery 12V 40.8Ah AGM

Mobility scooter battery Fulbat FPC12-40 12V 40.8Ah AGM
search
  • Mobility scooter battery Fulbat FPC12-40 12V 40.8Ah AGM

Specifications

BrandFULBAT
Part numberFPC12-40
Voltage (V)12V
Capacity (C20)40.80Ah
TechnologyAGM
Length197mm
Width165mm
Height170mm
Terminal typeBOLT-M6
See the full specifications →

This product is priced on demand to offer you the best available price at all times.

Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.

Thank you

Fulbat FPC12-40 12V 40,8Ah is a deep-cycle battery built to be discharged and recharged daily without losing capacity. Its reinforced grid and AGM/GEL separator extend the number of useful cycles well beyond a conventional starter battery.

Why this deep-cycle battery?

  • Daily cycling without wearhandles deep discharges without losing capacity
  • Sealed AGM/GELno maintenance, no risk of spills
  • Thousands of useful cyclesover its full lifetime
Voltage
12 V
Capacity
40,8 Ah C20
Dimensions
197×165×170 mm
Technology
AGM
Free quote, no obligation

Request a quote for your Mobility scooter battery Fulbat FPC12-40 12V 40.8Ah AGM

  • Reply in under 24 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Logo Fulbat

Mobility battery Fulbat FPC12-40 40.8Ah 12V

12VVoltage
40.8AhCapacity

The Fulbat FPC12-40 with AGM technology delivers 40.8 Ah at 12 V with the cycle life that power wheelchairs, mobility scooters and light electric vehicles demand. It replaces the original battery without adaptation in power wheelchairs and mobility scooters with a 197 × 165 × 170 mm format: same 40.8 Ah capacity.

  • Thousands of useful cycles over its lifetime.
  • Standard replacement format for wheelchairs and scooters.
  • AGM technology: absorbed electrolyte, no spills, can be mounted at an angle.
  • Designed to be discharged and recharged daily without losing capacity.

What the Fulbat FPC12-40 is for

The Fulbat FPC12-40 is designed for power wheelchairs, mobility scooters and light electric vehicles. Wheelchairs and scooters normally use two identical batteries in series: replace them together. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has BOLT-M6 terminals.

Technology inside the Fulbat FPC12-40

Within the Fulbat catalogue, the FPC12-40 is the 40.8 Ah model designed for this application.

In an AGM battery the electrolyte is absorbed in glass-fibre separators: there is no free liquid, it cannot spill and it can be mounted at an angle. That construction lowers internal resistance, speeds up recharging and multiplies cycle life compared with a conventional battery.

Size, terminals and hold-down of the Fulbat FPC12-40

In terms of format, the Fulbat FPC12-40 measures 197 × 165 × 170 mm (length × width × height). It uses BOLT-M6 terminals, the system that anchors and connects it in the vehicle. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.

Why choose Fulbat batteries

French brand Fulbat is a European reference in motorcycle, garden and leisure batteries: compact ranges, clear JIS codes and a consistent quality that workshops know well. All the Fulbat batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.

Usage and maintenance tips

Recharge the wheelchair or scooter after each use and do not leave it discharged for days: lead sulphates and loses capacity. Use the original charger or one compatible with the battery technology (AGM/GEL) and always replace both batteries in the set together.

Warranty and coverage

The Fulbat FPC12-40 comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.

Shipping, delivery and returns

Orders placed before 6:00 pm with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 24-48 working hours; for the Balearic and Canary Islands and the rest of the European Union allow 3 to 5 working days. You have 14 days to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.

BCOM-FULBAT-FPC12-40

Data sheet

Brand
FULBAT
Model
FULBAT FPC Cyclic
Voltage (V)
12V
Length
197mm
Width
165mm
Height
170mm
Technology
AGM
Terminal type
BOLT-M6
Capacity (C20)
40.80Ah

Specific References

MPN
FPC12-40

Recommended accessories — complement the Fulbat FPC12-40 with a charger or tester

How to change the battery

Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.

⏱ 10-15 min🛠 Tools: Screwdriver or small wrench (3-5 mm typical) · Protective gloves
  1. Step 1. Power off and unplug the device

    Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.

  2. Step 2. Locate the battery compartment

    Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.

  3. Step 3. Disconnect the negative (−) first

    With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.

  6. Step 6. Fit the new battery

    Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.

  7. Step 7. Connect the positive (+) first

    On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.

  8. Step 8. Initial charge before first use

    Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.

Frequently asked questions

How do I change this battery step by step?

In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

How long does the Fulbat FPC12-40 battery last?

Expected lifespan of the Fulbat FPC12-40 is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What size is this battery?

Dimensions (length × width × height) are 197×165×170 mm — also written as 197x165x170 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Which interchangeable batteries are there for this one?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,800 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.