Mk powered LS 24/8 · 24V 8A battery charger
Specifications
| Brand | MK POWERED |
|---|---|
| Part number | LS 24/8 |
| Voltage (V) | 24 |
| Load capacity | 60-90 Ah |
| Model | MK CARGADORES |
| EAN | 8404653009120 |
€159.95
VAT included
4,75/5★★★★★31 reviewsVerified purchases
- ★★★★Oscar Diaz:
Excelente atención, resolvieron todas mis dudas
- ★★★★★Jose Francisco Ramirez:
Los precios son muy competitivos pero la atención al cliente en esta web es lo mejor.
- ★★★★Juan Antonio Aguilar:
Se agradece ver que detrás de esta web hay un equipo de profesionales preocupados por asesorarte de la mejor manera.
MK LS 24/8 24V 8A is a multi-stage automatic charger: it reads the battery, charges it at the right current and switches to maintenance without overcharging, with protection against reverse polarity, short circuit and overcharge.
Why this charger?
- Smart chargingreads the battery and adjusts current in several stages
- Full protectionagainst overcharge, reverse polarity and short circuit
- Automatic maintenanceswitches to float and keeps the battery topped up without overcharging
Voltage
24 V
Charging current
8 A
Recommended battery
60-90 Ah
Weight
1,8 kg
Model
MK CARGADORES
MK Powered LS 24/8 24V 8A battery charger
With the MK Powered LS 24/8, MK Powered offers a staged, controlled charge that protects the battery and extends its life.
- Staged charging that protects the battery.
- Maintenance mode for long lay-ups.
- Protection against overcharge, short circuit and reverse polarity.
- Suitable for several technologies depending on the model.
MK Powered: the maker behind the LS 24/8
MK batteries are the standard in the electric mobility sector: sealed, approved for air transport and with the consistency that wheelchair manufacturers demand as original equipment.
Manufacturer's warranty
The MK Powered LS 24/8 comes with the manufacturer's official warranty against manufacturing defects.
When you get it and how to return it
Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.
BCOM-MK-LS 24/8
Data sheet
- Brand
- MK
- Reference
- LS 24/8
- Model
- MK CARGADORES
- Voltage (V)
- 24
- Load capacity
- 60-90 Ah
Specific References
- EAN13
- 8404653009120
- MPN
- LS 24/8
4,75/5
Verified purchasesLatest verified reviews
★★★★★Oscar Diaz
04/07/2026La atención de 10
Excelente atención, resolvieron todas mis dudas
★★★★★Jose Francisco Ramirez
17/02/2026Grandes
Los precios son muy competitivos pero la atención al cliente en esta web es lo mejor.
★★★★★Juan Antonio Aguilar
30/01/2026Servicio increíble
Se agradece ver que detrás de esta web hay un equipo de profesionales preocupados por asesorarte de la mejor manera.
★★★★★Francisco Jose Torres
02/01/2026Excelente trato al cliente
Esta web es genial. Y los profesionales que están del otro lado te ayudan y asesoran en lo que necesites.
Codes and references MK Powered LS 24/8
| Brand | MK Powered |
|---|---|
| Manufacturer range | MK CARGADORES |
| Manufacturer reference (MPN) | LS 24/8 |
| EAN-13 barcode | 8404653009120 |
| Dimensions (length × width × height) | 225 × 110 × 50 mm (225x110x50) |
Recommended accessories
How to change the battery
Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.
Step 1. Power off and unplug the device
Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.
Step 2. Locate the battery compartment
Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.
Step 3. Disconnect the negative (−) first
With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.
Step 6. Fit the new battery
Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.
Step 7. Connect the positive (+) first
On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.
Step 8. Initial charge before first use
Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.
Frequently asked questions
How do I fit the LS 24/8 model in my device?
In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
What is the service life of the LS 24/8 model?
Expected lifespan of the MK Powered LS 24/8 is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the MK Powered LS 24/8 battery?
Dimensions (length × width × height) are 225×110×50 mm — also written as 225x110x50 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Which batteries are equivalent to the MK Powered LS 24/8?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.