Fulbat FTX7A-BS · Motorcycle battery 12V 6.3Ah 105A AGM
Specifications
| Brand | FULBAT |
|---|---|
| Part number | FTX7A-BS |
| Voltage (V) | 12V |
| Capacity (C20) | 6.30Ah |
| Capacity (C10) | 6Ah (c10) |
| Cold cranking amps (EN) | 105A |
| Technology | AGM |
| Length | 150mm |
| Width | 87mm |
This product is priced on demand to offer you the best available price at all times.
Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.
Thank you
Fulbat FTX7A-BS 12V 6,3Ah 105A is a motorcycle starter battery with standard JIS code (the one on your bike's original label). Ready to use, sealed and vibration-resistant. Fits any model that takes the same JIS reference — the code your mechanic recognises at a glance.
Why this motorcycle battery?
- Same JIS referenceas your bike's original — fits first time
- Sealed and ready to useno acid handling, no refills
- Survives winter storageholds charge through long off-season
Voltage
12 V
Capacity
6,3 Ah
Cold cranking
105 A
Dimensions
150×87×93 mm
Technology
AGM
Polarity
Positive on the left
Free quote, no obligation
Request a quote for your Motorcycle battery Fulbat FTX7A-BS 12V 6.3Ah 105A AGM
- Reply in under 24 working hours
- Best price guaranteed
Motorcycle battery Fulbat FTX7A-BS 6.3Ah 105A 12V
12VVoltage
6.3AhCapacity
105ACold cranking
With 6.3 Ah at 12 V and 105 A of cold cranking current (EN), the Fulbat FTX7A-BS with AGM technology replaces the original battery of motorcycles, scooters, quads and personal watercraft. It measures 150 × 87 × 93 mm and the positive terminal on the left, the format sought by anyone replacing a 6.3 Ah battery in motorcycles.
- Same JIS code as the original battery: fits first time.
- AGM technology: absorbed electrolyte, no spills, can be mounted at an angle.
- Energetic cranking for high-compression engines.
- Resistant to the vibration typical of two wheels.
What the Fulbat FTX7A-BS is for
With 6.3 Ah, the Fulbat FTX7A-BS covers the starting of motorcycles, scooters, quads and personal watercraft. The JIS code on your current battery label is the safest way to confirm equivalence.
Size, terminals and hold-down of the Fulbat FTX7A-BS
The Fulbat FTX7A-BS is made in the 150 × 87 × 93 mm format. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.
Technology inside the Fulbat FTX7A-BS
Fulbat builds the FTX7A-BS to the same standards as the rest of its catalogue; what changes between references is capacity, format and terminal position.
In an AGM battery the electrolyte is absorbed in glass-fibre separators: there is no free liquid, it cannot spill and it can be mounted at an angle. That construction lowers internal resistance, speeds up recharging and multiplies cycle life compared with a conventional battery.
What Fulbat does differently
French brand Fulbat is a European reference in motorcycle, garden and leisure batteries: compact ranges, clear JIS codes and a consistent quality that workshops know well. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.
Official warranty
The Fulbat FTX7A-BS comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.
How to make it last longer
Avoid repeated cranking attempts on a cold bike for long: if it does not start on the third try, let the battery rest for a minute. If the bike spends the winter standing, connect a trickle charger: deep discharge through inactivity is the first cause of premature failure.
Delivery times and returns
Orders placed before 6:00 pm with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 24-48 working hours; for the Balearic Islands and the rest of the European Union allow 3 to 5 working days. You have 14 days to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.
BCOM-FULBAT-FTX7A-BS
Data sheet
- Brand
- FULBAT
- Model
- FULBAT Motorcycle MF
- Voltage (V)
- 12V
- Length
- 150mm
- Width
- 87mm
- Height
- 93mm
- Technology
- AGM
- Terminal layout
- Positive left
- Cold cranking amps (EN)
- 105A
- Capacity (C20)
- 6.30Ah
- Capacity (C10)
- 6Ah (c10)
Specific References
- MPN
- FTX7A-BS
Comparison: Fulbat FTX7A-BS vs equivalents
The Fulbat FTX7A-BS is interchangeable with these equivalent references: AGM12-8 (Exide), 508901015 (Varta), ETZ10-BS (Exide), 508909015 (Varta).
| Product | Specifications | Technology | Price |
|---|---|---|---|
Fulbat
FTX7A-BS
This battery
|
|||
Exide
AGM12-8
|
12V 8.6Ah 145A | AGM | €48.20 |
Varta
508901015
|
12V 8Ah 150A | AGM | €39.10 |
Exide
ETZ10-BS
|
12V 9Ah 145A | AGM | €34.10 |
Varta
508909015
|
12V 9Ah 150A | AGM | €59.50 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Recommended accessories
How to change the battery
Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.
Step 1. Prepare the vehicle
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
Step 2. Locate the battery compartment
On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.
Step 3. Disconnect the negative (−) terminal
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.
Step 6. Install the new battery
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Step 7. Connect the cables
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Step 8. Verify the engine starts
Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.
Frequently asked questions
How is the Fulbat FTX7A-BS battery installed in the vehicle?
In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
What is the service life of the FTX7A-BS model?
Expected lifespan of the Fulbat FTX7A-BS is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Fulbat FTX7A-BS battery?
Dimensions (length × width × height) are 150×87×93 mm — also written as 150x87x93 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Will the Fulbat FTX7A-BS battery fit my motorcycle?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The FTX7A-BS typically fits a wide range of European vehicles thanks to its standard DIN case format.
Which batteries are equivalent to the Fulbat FTX7A-BS?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.