Fulbat NS60 +D · Lawnmower battery 12V 45Ah 350A
Specifications
| Brand | FULBAT |
|---|---|
| Part number | NS60 +D |
| Voltage (V) | 12V |
| Capacity (C20) | 45Ah |
| Technology | Lead-acid |
| Length | 236mm |
| Width | 128mm |
| Height | 222mm |
| Terminal layout | Positive right |
This product is priced on demand to offer you the best available price at all times.
Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.
Thank you
Fulbat NS60 +D 12V 45Ah 350A is a starter battery for lawnmowers and garden machinery, sized to crank reliably after months of storage.
Why this lawnmower battery?
- Same JIS referenceas your bike's original — fits first time
- Sealed and ready to useno acid handling, no refills
- Survives winter storageholds charge through long off-season
Voltage
12 V
Capacity
45 Ah
Cold cranking
350 A
Dimensions
236×128×222 mm
Technology
Lead-acid
Polarity
Positive on the right
Model
FULBAT Lawn & Garden Ca/Ca
Mfr. reference
NS60 +D
Free quote, no obligation
Request a quote for your Lawnmower battery Fulbat NS60 +D 12V 45Ah 350A
- Reply in under 24 working hours
- Best price guaranteed
Lawn mower battery Fulbat NS60 +D 45Ah 350A 12V
12VVoltage
45AhCapacity
350ACold cranking
The Fulbat NS60 +D with conventional lead-acid technology delivers 45 Ah at 12 V and 350 A of cold cranking current (EN) for ride-on mowers, tillers and garden machinery. Measuring 236 × 128 × 222 mm and the positive terminal on the right, it is the direct replacement for ride-on mowers fitted from the factory with a 45 Ah battery of this format.
- Sealed and maintenance-free.
- Direct replacement for the original battery.
- Good balance of capacity, cranking power and price.
- Resistant to garden-engine vibration.
What the Fulbat NS60 +D is for
The Fulbat NS60 +D is designed for ride-on mowers, tillers and garden machinery. After winter, a full charge before the first start avoids surprises.
Dimensions, polarity and mounting
The Fulbat NS60 +D is made in the 236 × 128 × 222 mm format. The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.
Technology inside the Fulbat NS60 +D
The NS60 +D is one of the Fulbat references for this type of use; it shares the same manufacturing and quality-control criteria as the rest of the brand's catalogue.
Conventional lead-acid is the benchmark against which other technologies are compared: good cranking current, great tolerance to alternator charging and the best price per amp-hour.
Why choose Fulbat batteries
Fulbat has manufactured in France since 1978 and specialises in motorcycles and light vehicles. Its catalogue is short and clear, covers almost the whole fleet and works only with sealed, leak-free batteries. All the Fulbat batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.
Warranty and coverage
The Fulbat NS60 +D comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.
Usage and maintenance tips
Disconnect or remove the battery over winter and give it a maintenance charge before storing it. On batteries with filler caps, check the electrolyte level and top up only with distilled water.
Delivery times and returns
Orders placed before 6:00 pm with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 24-48 working hours; for the Balearic and Canary Islands and the rest of the European Union allow 3 to 5 working days. You have 14 days to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.
BCOM-FULBAT-NS60 +D
Data sheet
- Brand
- FULBAT
- Model
- FULBAT Lawn & Garden Ca/Ca
- Voltage (V)
- 12V
- Length
- 236mm
- Width
- 128mm
- Height
- 222mm
- Technology
- Lead-acid
- Terminal layout
- Positive right
- Cold cranking amps (EN)
- 350A
- Capacity (C20)
- 45Ah
Specific References
- MPN
- NS60 +D
Comparison: Fulbat NS60 +D vs equivalents
The Fulbat NS60 +D is interchangeable with these equivalent references: B32 (Varta), B31 (Varta), TB456 (Tudor), TB454 (Tudor), TA456 (Tudor).
| Product | Specifications | Technology | Price |
|---|---|---|---|
Fulbat
NS60 +D
This battery
|
|||
Varta
B32
|
12V 45Ah 330A | Lead-acid | €47.95 |
Varta
B31
|
12V 45Ah 330A | Lead-acid | €47.60 |
Tudor
TB456
|
12V 45Ah 330A | Lead-acid | €71.90 |
Tudor
TB454
|
12V 45Ah 330A | Lead-acid | €89.90 |
Tudor
TA456
|
12V 45Ah 390A | Lead-acid | €95.90 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Recommended accessories
How to change the battery
Guide to replace a truck battery in 30-60 minutes. Truck batteries weigh 25-50 kg — we recommend working in pairs and using a carrying strap.
Step 1. Prepare the vehicle
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
Step 2. Locate the battery
Open the bonnet. The battery is usually in the engine bay, but in many modern cars it may be in the boot or under the passenger seat. Check the manual if you cannot find it.
Step 3. Disconnect the negative (−) terminal
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery (two people)
Loosen the bottom hold-down clamp. Truck batteries weigh 25-50 kg — lift in pairs with gloves and a carrying strap. Forcing the lift alone risks back injury.
Step 6. Install the new battery
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Step 7. Connect the cables
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Step 8. Verify the engine starts
Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.
Frequently asked questions
How is the Fulbat NS60 +D battery installed in the vehicle?
In most trucks it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On trucks with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
What is the service life of the NS60 +D model?
Expected lifespan of the Fulbat NS60 +D is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Fulbat NS60 +D battery?
Dimensions (length × width × height) are 236×128×222 mm — also written as 236x128x222 mm — following the European DIN standard. Always measure the space in your truck before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Will the Fulbat NS60 +D battery fit my truck?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The NS60 +D typically fits a wide range of European vehicles thanks to its standard DIN case format.
Which batteries are equivalent to the Fulbat NS60 +D?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop trucks. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.