Specifications
| Brand | Fulmen |
|---|---|
| Part number | FB455 |
| Voltage (V) | 12 |
| Capacity (C20) | 45Ah (c20) |
| Cold cranking amps (EN) | 330A |
| Technology | Lead-acid |
| Length | 237 mm |
| Width | 127 mm |
| Height | 227 mm |
This product is priced on demand to offer you the best available price at all times.
Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.
Thank you
Fulmen FB455 12V 45Ah 330A is a starter battery with OEM-equivalent quality, designed for modern passenger cars. Delivers reliable cold-cranks even after weeks of inactivity and supports stable auxiliary loads (lights, climate control, infotainment).

With 45 Ah at 12 V and 330 A of cold cranking current (EN), the Fulmen FB455 from the Formula range is a starter battery built for passenger cars with conventional starting, without a Start-Stop system. Measuring 237 × 127 × 227 mm and the positive terminal on the left, it is the direct replacement for cars fitted from the factory with a 45 Ah battery of this format.
The Fulmen FB455 covers the needs of passenger cars with conventional starting, without a Start-Stop system: reliable starting, stable voltage for the electronics and a service life of several years in daily use. Check that it matches your current battery in size and terminal position. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 11.40 kg and B00 hold-down.
It has external dimensions of 237 × 127 × 227 mm and weighs 11.40 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B00 hold-down, the system that anchors and connects it in the vehicle. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.
The Formula is the Fulmen range the FB455 belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.
In a conventional battery the electrolyte is liquid and the lead plates are immersed in it. It is a mature, economical and easily recycled technology, ideal for starting vehicles in normal use.
Fulmen is the historic French brand of the Exide group: batteries made on the same lines and with the same technology as original equipment, widely used by workshops across Europe. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.
The Fulmen FB455 comes with the manufacturer's official warranty against manufacturing defects; the exact period is stated in the brand's conditions. If it fails through a defect within the period, we replace it free of charge.
On batteries with filler caps, check the electrolyte level and top up only with distilled water. Keep the terminals clean and tight, and check that the resting voltage does not drop below 12.4 V: below that it is time to recharge.
Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.
Data sheet
Specific References
This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.
| Brand | Fulmen |
|---|---|
| Manufacturer range | Dynamic SLI (formerly Blue Dynamic) |
| Manufacturer part number (MPN) | FB455 |
| Also known as | 545158033 · Fulmen Blue Dynamic FB455 · Fulmen Dynamic SLI FB455 |
| ETN code | 5451580333132 (short form 545 158 033) |
| EAN-13 barcode | 3661024044387 |
| Dimensions (length × width × height) | 237 × 127 × 227 mm (237x127x227) |
The Fulmen FB455 is interchangeable with these equivalent references: TB455 (Tudor), B34 (Varta), EB455 (Exide), EK457 (Exide).
| Product | Specifications | Technology | Price |
|---|---|---|---|
|
|
12V 45Ah 330A | Lead-acid | |
|
|
12V 45Ah 330A | Lead-acid | €55.70 |
|
|
12V 45Ah 330A | Lead-acid | €54.95 |
|
|
12V 45Ah 330A | Lead-acid | €83.20 |
|
|
45Ah 380A | AGM | €212.40 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
The Fulmen FB455 fits 65 vehicles. Most searched below:
Step-by-step guide to replace your car battery in 15-30 minutes (longer if the battery is under the seat or in the boot) without losing vehicle settings.
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
Open the bonnet. The battery is usually in the engine bay, but in many modern cars it may be in the boot or under the passenger seat. Check the manual if you cannot find it.
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Loosen the bottom hold-down clamp with the same wrench. Lift the battery carefully (it can weigh 15-25 kg). Clean the tray with a brush and baking soda if there is corrosion.
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.
In most cars it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On cars with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
Expected lifespan of the Fulmen FB455 is 4 to 6 years in regular car use without Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
Dimensions (length × width × height) are 237×127×227 mm — also written as 237x127x227 mm — following the European DIN standard. Always measure the space in your car before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
The manufacturer reference (MPN) is FB455 and its ETN code is 5451580333132 (short form 545 158 033), the European identifier used in spare-part catalogues. The EAN-13 barcode is 3661024044387. It belongs to the Varta Dynamic SLI range. Any of these codes identifies exactly this battery when requesting quotes or comparing prices.
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The FB455 fits 65 verified vehicle versions in our database.
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop cars. See the "Equivalents" section to view recommended options at the same performance level.
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.