Fulmen FG1101 · Truck battery 12V 110Ah 750A

Batería Fulmen FG1101 110Ah - 1
search
  • Batería Fulmen FG1101 110Ah - 1

Specifications

BrandFulmen
Part numberFG1101
Voltage (V)12
Capacity (C20)110Ah (c20)
Cold cranking amps (EN)750A
TechnologyLead-acid
Length349 mm
Width175 mm
Height235 mm
See the full specifications →

This product is priced on demand to offer you the best available price at all times.

Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.

Thank you

Fulmen FG1101 12V 110Ah 750A is an SHD (Super Heavy Duty) truck battery for intensive professional use. Vibration-resistant, withstands long cold-diesel cranks and deep discharges during parking with active loads (tachograph, refrigeration, heater).

Why this truck battery?

  • True Heavy Dutybuilt for intensive professional use
  • Long cold-diesel cranksreliable even in extreme cold
  • Powers services at idletachograph, heater and lights with engine off
Voltage
12 V
Capacity
110 Ah C20
Cold cranking
750 A EN-1
Dimensions
349×175×235 mm
Technology
Lead-acid
Polarity
Positive on the left
Weight
25,4 kg
Model
FULMEN StartPRO
Free quote, no obligation

Request a quote for your Truck battery Fulmen FG1101 12V 110Ah 750A

  • Reply in under 24 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Logo Fulmen

Truck battery Fulmen FG1101 StartPRO 110Ah 750A 12V

12VVoltage
110AhCapacity
750ACold cranking
25.40kgWeight

With 110 Ah and 750 A of cold cranking current (EN), the Fulmen FG1101 from the StartPRO range is built for professional use in trucks, buses, tractors and heavy machinery. Measuring 349 × 175 × 235 mm and the positive terminal on the left, it is the direct replacement for trucks fitted from the factory with a 110 Ah battery of this format.

  • Good balance of capacity, cranking power and price.
  • Resistant to constant chassis vibration.
  • Powers tachograph, fridge and heater during rest stops.
  • Better tolerance to deep discharge than a conventional starter battery.

Will it fit your current battery tray?

In terms of format, the Fulmen FG1101 measures 349 × 175 × 235 mm (length × width × height) and weighs 25.40 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B00 hold-down, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.

What the Fulmen FG1101 is for

With 110 Ah, the Fulmen FG1101 cranks large-displacement diesel engines in the cold and powers tachograph, fridge and heater during rest stops. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 25.40 kg and B00 hold-down.

The Fulmen FG1101: StartPRO range and conventional lead-acid technology

The StartPRO is the Fulmen range the FG1101 belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.

In a conventional battery the electrolyte is liquid and the lead plates are immersed in it. It is a mature, economical and easily recycled technology, ideal for starting vehicles in normal use.

Why choose Fulmen batteries

Fulmen is the historic French brand of the Exide group: batteries made on the same lines and with the same technology as original equipment, widely used by workshops across Europe. All the Fulmen batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.

Official warranty

The Fulmen FG1101 comes with the manufacturer's official warranty against manufacturing defects. An important note for commercial vehicles: most trucks use two batteries connected in series (24 V installation). If you replace only one, the new battery works alongside the old one, which has already lost capacity; that imbalance shortens its life and the manufacturer may treat it as misuse. Always replace both at the same time.

Usage and maintenance tips

On batteries with filler caps, check the electrolyte level and top up only with distilled water. During rest stops with active loads, avoid repeated deep discharges: they shorten the life of any starter battery.

Shipping, delivery and returns

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.

BCOM-FULMEN-FG1101

Data sheet

Brand
FULMEN
Reference
FG1101
Model
FULMEN StartPRO
Voltage (V)
12
Length
349 mm
Width
175 mm
Height
235 mm
Weight
25.40 Kgs
Technology
Lead-acid
EAN
3661024045384
Terminal layout
Positive terminal on the left
Hold-down
B00
Cold cranking amps (EN)
750A
Capacity (C20)
110Ah (c20)
Case type
D02

Specific References

EAN13
3661024045384
MPN
FG1101

Codes and references Fulmen FG1101

Brand Fulmen
Manufacturer range FULMEN StartPRO
Manufacturer part number (MPN) FG1101
EAN-13 barcode 3661024045384
Dimensions (length × width × height) 349 × 175 × 235 mm (349x175x235)

Comparison: Fulmen FG1101 vs equivalents — alternatives with the same dimensions, Ah and CCA

The Fulmen FG1101 is interchangeable with these equivalent references: I5 (Varta), TG1101 (Tudor), LFS120 (Varta), EG1101 (Exide), ER550 (Exide).

Product Specifications Technology Price
Fulmen FG1101 Fulmen FG1101 This battery 12V 110Ah 750A Lead-acid
Varta I5 Varta I5 ★ 4,8 12V 110Ah 680A Lead-acid €121.70
Tudor TG1101 Tudor TG1101 ★ 4,8 12V 110Ah 750A Lead-acid €180.10
Varta LFS120 Varta LFS120 ★ 4,8 12V 120Ah 780A Lead-acid €290.40
Exide EG1101 Exide EG1101 ★ 4,8 12V 110Ah 750A Lead-acid €184.20
Exide ER550 Exide ER550 ★ 4,8 12V 115Ah 760A Lead-acid €123.30

Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.

Recommended accessories — complement the Fulmen FG1101 with a charger or tester

How to change the battery

Guide to replace a truck battery in 30-60 minutes. Truck batteries weigh 25-50 kg — we recommend working in pairs and using a carrying strap.

⏱ 30-60 min🛠 Tools: 13 mm or 17 mm wrench (depending on make) · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery

    Open the bonnet. The battery is usually in the engine bay, but in many modern cars it may be in the boot or under the passenger seat. Check the manual if you cannot find it.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery (two people)

    Loosen the bottom hold-down clamp. Truck batteries weigh 25-50 kg — lift in pairs with gloves and a carrying strap. Forcing the lift alone risks back injury.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify the engine starts

    Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.

Frequently asked questions

How do I fit the FG1101 model in my truck?

In most trucks it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On trucks with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

What is the service life of the FG1101 model?

Expected lifespan of the Fulmen FG1101 is 4 to 6 years in regular truck use without Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the measurements of the FG1101 model?

Dimensions (length × width × height) are 349×175×235 mm — also written as 349x175x235 mm — following the European DIN standard. Always measure the space in your truck before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Will the Fulmen FG1101 battery fit my truck?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The FG1101 typically fits a wide range of European vehicles thanks to its standard DIN case format.

What are the equivalents of the FG1101 model?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop trucks. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,900 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.