Motobatt MB16A · Motorcycle battery 12V 19Ah 200A AGM
Specifications
| Brand | MOTOBATT |
|---|---|
| Part number | MB16A |
| Voltage (V) | 12 |
| Capacity (C20) | 19 |
| Capacity (C10) | 19Ah (c10) |
| Technology | Quadflex |
| Length | 151.00 mm |
| Width | 91.00 mm |
| Height | 181.00 mm |
€369.70
VAT included
4,90/5★★★★★11 reviewsVerified purchases
- ★★★★★Juan Francisco Cruz:
Excelente atención, resolvieron todas mis dudas
- ★★★★★Jose Miguel Ramirez:
Se agradece ver que detrás de esta web hay un equipo de profesionales preocupados por asesorarte de la mejor manera.
- ★★★★★Marcos Santiago:
Los precios son muy competitivos pero la atención al cliente en esta web es lo mejor.
Motobatt MB16A 12V 19Ah 200A is a motorcycle starter battery with standard JIS code (the one on your bike's original label). Ready to use, sealed and vibration-resistant. Fits any model that takes the same JIS reference — the code your mechanic recognises at a glance.
Why this motorcycle battery?
- Same JIS referenceas your bike's original — fits first time
- Sealed and ready to useno acid handling, no refills
- Survives winter storageholds charge through long off-season
Voltage
12 V
Capacity
19 Ah
Cold cranking
200 A
Dimensions
151×91×181 mm
Technology
AGM Quadflex
Weight
5,47 kg
Model
MOTOBATT QUADFLEX
Mfr. reference
MB16A
Motorcycle battery Motobatt MB16A Quadflex 19Ah 200A 12V
12VVoltage
19AhCapacity
200ACold cranking
5.47kgWeight
The Motobatt MB16A motorcycle battery is rated at 12 V, 19 Ah and 200 A of cold cranking current (EN) from the Quadflex range, and is designed for motorcycles, scooters, quads and personal watercraft. It measures 151 × 91 × 181 mm, the format sought by anyone replacing a 19 Ah battery in motorcycles.
- Energetic cranking for high-compression engines.
- Resistant to the vibration typical of two wheels.
- Same JIS code as the original battery: fits first time.
- AGM technology: absorbed electrolyte, no spills, can be mounted at an angle.
What the Motobatt MB16A is for
The Motobatt MB16A is a common replacement in motorcycles, scooters, quads and personal watercraft. If your bike spends the winter standing, a trickle charger stops it reaching spring flat. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 5.47 kg.
Will it fit your current battery tray?
The Motobatt MB16A is made in the 151 × 91 × 181 mm format and weighs 5.47 kg. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.
Why choose Motobatt batteries
Motobatt batteries stand out for capacity and cranking current above the original battery in the same tray, thanks to a compact AGM design and the four-terminal Quadflex system. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.
The Motobatt MB16A: Quadflex range and AGM technology
The Quadflex is the Motobatt range the MB16A belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.
AGM (Absorbent Glass Mat) technology seals the electrolyte in glass microfibre. The result is a maintenance-free battery that is highly vibration-resistant and able to withstand deep discharges that would ruin a classic lead-acid battery.
How to make it last longer
Avoid repeated cranking attempts on a cold bike for long: if it does not start on the third try, let the battery rest for a minute. Check the resting voltage before the season (above 12.6 V on a charged battery) and make sure the terminals are clean and tight.
Warranty and coverage
The Motobatt MB16A comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.
Shipping, delivery and returns
Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.
BCOM-MOTOBATT-MB16A
Data sheet
- Brand
- MOTOBATT
- Reference
- MB16A
- Model
- MOTOBATT QUADFLEX
- Voltage (V)
- 12
- Length
- 151.00 mm
- Width
- 91.00 mm
- Height
- 181.00 mm
- Weight
- 5.47 Kgs
- Technology
- Quadflex
- Cold cranking amps (EN)
- 200A
- Capacity (C20)
- 19
- Capacity (C10)
- 19Ah (c10)
Specific References
- MPN
- MB16A
4,90/5
Verified purchasesLatest verified reviews
★★★★★Juan Francisco Cruz
27/06/2026Gracias por su atención
Excelente atención, resolvieron todas mis dudas
★★★★★Jose Miguel Ramirez
27/01/2026Magnifico servicio
Se agradece ver que detrás de esta web hay un equipo de profesionales preocupados por asesorarte de la mejor manera.
★★★★★Marcos Santiago
16/01/2026Muy bien todo
Los precios son muy competitivos pero la atención al cliente en esta web es lo mejor.
★★★★★Cesar Esteban
31/12/2025Equipo de profesionales, Gracias
Quiero dejar una reseña por que me parece increíble el buen trato que me dieron. Muy buena atención telefónica
Recommended accessories
How to change the battery
Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.
Step 1. Prepare the vehicle
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
Step 2. Locate the battery compartment
On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.
Step 3. Disconnect the negative (−) terminal
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.
Step 6. Install the new battery
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Step 7. Connect the cables
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Step 8. Verify the engine starts
Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.
Frequently asked questions
How is the Motobatt MB16A battery installed in the vehicle?
In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How long does the Motobatt MB16A battery last?
Expected lifespan of the Motobatt MB16A is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the measurements of the MB16A model?
Dimensions (length × width × height) are 151×91×181 mm — also written as 151x91x181 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Will the Motobatt MB16A battery fit my motorcycle?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The MB16A typically fits a wide range of European vehicles thanks to its standard DIN case format.
Which batteries are equivalent to the Motobatt MB16A?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.