Motobatt MBT6N6 · Motorcycle battery 6V 6Ah AGM

Battery MOTOBATT MBT6N6 6V 6Ah
search
  • Battery MOTOBATT MBT6N6 6V 6Ah

Specifications

BrandMOTOBATT
Part numberMBT6N6
Voltage (V)6
Capacity (C20)6
Capacity (C10)6Ah (c10)
TechnologyQuadflex
Length97.00 mm
Width56.00 mm
Height111.00 mm
See the full specifications →
€369.70
VAT included
Quantity

  • 24-48h delivery
  • 14-day returns
  • Secure payment
  • +11,900 reviews

Brand: MOTOBATT Part number: MBT6N6

Motobatt MBT6N6 6V 6Ah is a motorcycle starter battery with standard JIS code (the one on your bike's original label). Ready to use, sealed and vibration-resistant. Fits any model that takes the same JIS reference — the code your mechanic recognises at a glance.

Why this motorcycle battery?

  • Same JIS referenceas your bike's original — fits first time
  • Sealed and ready to useno acid handling, no refills
  • Survives winter storageholds charge through long off-season
Voltage
6 V
Capacity
6 Ah C10
Dimensions
97×56×111 mm
Technology
AGM Quadflex
Weight
1,05 kg
Model
MOTOBATT QUADFLEX
Mfr. reference
MBT6N6
Logo Motobatt

Motorcycle battery Motobatt MBT6N6 Quadflex 6Ah 6V

6VVoltage
6AhCapacity
1.05kgWeight

With 6 Ah at 6 V, the Motobatt MBT6N6 with AGM technology replaces the original battery of motorcycles, scooters, quads and personal watercraft. It replaces the original battery without adaptation in motorcycles with a 97 × 56 × 111 mm format: same 6 Ah capacity.

  • AGM technology: absorbed electrolyte, no spills, can be mounted at an angle.
  • Same JIS code as the original battery: fits first time.
  • Resistant to the vibration typical of two wheels.
  • Energetic cranking for high-compression engines.

Size, terminals and hold-down of the Motobatt MBT6N6

The Motobatt MBT6N6 is made in the 97 × 56 × 111 mm format and weighs 1.05 kg. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.

What the Motobatt MBT6N6 is for

With 6 Ah, the Motobatt MBT6N6 covers the starting of motorcycles, scooters, quads and personal watercraft. The JIS code on your current battery label is the safest way to confirm equivalence. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 1.05 kg.

The Motobatt MBT6N6: Quadflex range and AGM technology

Within the Motobatt catalogue, the Quadflex series groups the references designed for this use. The MBT6N6 is the 6 Ah model of that family, with the same performance as its siblings in other sizes.

AGM means the acid is held in a glass mat instead of floating free. That is why the battery can be installed in the cabin without gases, survives more cycles and recovers its charge quickly.

What Motobatt does differently

Motobatt batteries stand out for capacity and cranking current above the original battery in the same tray, thanks to a compact AGM design and the four-terminal Quadflex system. We guarantee that every Motobatt arrives new, charged and with the manufacturer's full warranty.

Manufacturer's warranty

The Motobatt MBT6N6 comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.

Usage and maintenance tips

Avoid repeated cranking attempts on a cold bike for long: if it does not start on the third try, let the battery rest for a minute. If the bike spends the winter standing, connect a trickle charger: deep discharge through inactivity is the first cause of premature failure.

When you get it and how to return it

Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.

BCOM-MOTOBATT-MBT6N6

Data sheet

Brand
MOTOBATT
Reference
MBT6N6
Model
MOTOBATT QUADFLEX
Voltage (V)
6
Length
97.00 mm
Width
56.00 mm
Height
111.00 mm
Weight
1.05 Kgs
Technology
Quadflex
Capacity (C20)
6
Capacity (C10)
6Ah (c10)

Specific References

MPN
MBT6N6

Recommended accessories — complement the Motobatt MBT6N6 with a charger or tester

How to change the battery

Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.

⏱ 10-15 min🛠 Tools: 8 mm wrench (some bikes use 10 mm) · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery compartment

    On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify the engine starts

    Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.

Frequently asked questions

How is the Motobatt MBT6N6 battery installed in the vehicle?

In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

How long does the Motobatt MBT6N6 battery last?

Expected lifespan of the Motobatt MBT6N6 is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the measurements of the MBT6N6 model?

Dimensions (length × width × height) are 97×56×111 mm — also written as 97x56x111 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Does this battery fit my motorcycle?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The MBT6N6 typically fits a wide range of European vehicles thanks to its standard DIN case format.

Which batteries are equivalent to the Motobatt MBT6N6?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,900 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.