Q-battery 6SEM-230 · Caravan battery 6V 230Ah

Batería Q-battery 6SEM-230 230Ah - 1
search
  • Batería Q-battery 6SEM-230 230Ah - 1

Specifications

BrandQ-battery
Part number6SEM-230
Voltage (V)6
Capacity (C20)230Ah (c20)
TechnologyLead-acid
Length242.00 cm
Width190.00 cm
Height274.00 cm
Weight32.00 Kgs
See the full specifications →
€352.70
VAT included
Quantity

  • 24-48h delivery
  • 14-day returns
  • Secure payment
  • +11,700 reviews

Brand Q-battery Reference 6SEM-230

Q-battery 6SEM-230 6V 230Ah is a leisure battery for campers, motorhomes and caravans. Designed to power the entire interior kit (fridge, heater, water pump, USB, LED lighting) for several days off-grid, with no need to plug into a campsite hookup.

Why this caravan battery?

  • Real off-grid autonomyno campsite hookup needed
  • Lasts the whole seasonhandles daily discharges without capacity loss
  • Powers it all at oncefridge, water pump, LED and USB without issues
Voltage
6 V
Capacity
230 Ah C20
Dimensions
242×190×274 mm
Technology
Lead-acid
Weight
32 kg
Model
SEMITRACTION BATTERY
Logo Q-Battery

Mobility battery Q-Battery 6SEM-230 Semitraction Battery 230Ah 6V

6VVoltage
230AhCapacity
32kgWeight

Designed for power wheelchairs, mobility scooters and light electric vehicles, the Q-Battery 6SEM-230 from the Semitraction Battery range offers 230 Ah of deep-cycle capacity with conventional lead-acid technology. Measuring 242 × 190 × 274 mm, it is the direct replacement for power wheelchairs and mobility scooters fitted from the factory with a 230 Ah battery of this format.

  • No maintenance, no water top-ups.
  • Approved for air and sea transport (VRLA).
  • Good balance of capacity, cranking power and price.
  • Sealed AGM/GEL: safe indoors and in transport.

What the Q-Battery 6SEM-230 is for

The Q-Battery 6SEM-230 is designed for power wheelchairs, mobility scooters and light electric vehicles. Wheelchairs and scooters normally use two identical batteries in series: replace them together. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 32 kg, A-Pole terminals and B0 hold-down.

The Q-Battery 6SEM-230: Semitraction Battery range and conventional lead-acid technology

The 6SEM-230 is part of the Q-Battery Semitraction Battery range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.

In a conventional battery the electrolyte is liquid and the lead plates are immersed in it. It is a mature, economical and easily recycled technology, ideal for starting vehicles in normal use.

Size, terminals and hold-down of the Q-Battery 6SEM-230

In terms of format, the Q-Battery 6SEM-230 measures 242 × 190 × 274 mm (length × width × height) and weighs 32 kg. It uses a B0 hold-down and A-Pole terminals, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.

What Q-Battery does differently

The Q-Battery catalogue runs from small alarm batteries to large traction monoblocs, always with sealed, maintenance-free technology. All the Q-Battery batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.

Usage and maintenance tips

On batteries with filler caps, check the electrolyte level and top up only with distilled water. Recharge the wheelchair or scooter after each use and do not leave it discharged for days: lead sulphates and loses capacity.

Warranty and coverage

The Q-Battery 6SEM-230 comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.

When you get it and how to return it

Orders placed before 6:00 pm with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 24-48 working hours; for the Balearic and Canary Islands and the rest of the European Union allow 3 to 5 working days. You have 14 days to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.

BCOM-Q-BATTERY-6SEM-230

Data sheet

Brand
Q-Battery
Reference
6SEM-230
Model
SEMITRACTION BATTERY
Voltage (V)
6
Length
242.00 cm
Width
190.00 cm
Height
274.00 cm
Weight
32.00 Kgs
Technology
Lead-acid
Terminal type
A-Pole
Hold-down
B0
Capacity (C20)
230Ah (c20)

Specific References

MPN
6SEM-230

Recommended accessories — complement the Q-battery BATTERY-6SEM-230 with a charger or tester

How to change the battery

Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.

⏱ 10-15 min🛠 Tools: Screwdriver or small wrench (3-5 mm typical) · Protective gloves
  1. Step 1. Power off and unplug the device

    Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.

  2. Step 2. Locate the battery compartment

    Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.

  3. Step 3. Disconnect the negative (−) first

    With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.

  6. Step 6. Fit the new battery

    Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.

  7. Step 7. Connect the positive (+) first

    On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.

  8. Step 8. Initial charge before first use

    Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.

Frequently asked questions

How is the Q-battery 6SEM-230 battery installed in the vehicle?

In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

What is the service life of the 6SEM-230 model?

Expected lifespan of the Q-battery 6SEM-230 is 4 to 6 years in regular device use without Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the dimensions of the Q-battery 6SEM-230 battery?

Dimensions (length × width × height) are 242×190×274 mm — also written as 242x190x274 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Which batteries are equivalent to the Q-battery 6SEM-230?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,700 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.