Q-battery 8DC-190 · Traction battery 8V 190Ah
Specifications
| Brand | Q-battery |
|---|---|
| Part number | 8DC-190 |
| Voltage (V) | 8 |
| Capacity (C20) | 190Ah (c20) |
| Technology | Lead-acid |
| Length | 260.00 cm |
| Width | 180.00 cm |
| Height | 275.00 cm |
| Weight | 31.60 Kgs |
€433.90
VAT included
Q-battery 8DC-190 8V 190Ah is a traction battery for industrial electric vehicles: forklifts, pallet trucks, elevating platforms, cleaning machines (scrubbers) and golf buggies. Built for deep discharges and 8-hour continuous work cycles.
Why this traction battery?
- Industrial designbuilt for 8 hours of continuous daily work
- Deep discharges without damagefully recovers when recharged
- Long industrial lifespanpays back the investment over time
Voltage
8 V
Capacity
190 Ah
Dimensions
260×180×275 mm
Technology
Lead-acid
Weight
31,6 kg
Model
DEEP CYCLE BATTERY
Traction battery Q-Battery 8DC-190 Deep Cycle Battery 190Ah 8V
8VVoltage
190AhCapacity
31.60kgWeight
With 190 Ah with conventional lead-acid technology, the Q-Battery 8DC-190 from the Deep Cycle Battery range supports continuous duty cycles in forklifts, pallet trucks, stackers and aerial work platforms. It measures 260 × 180 × 275 mm, the format sought by anyone replacing a 190 Ah battery in forklifts and pallet trucks.
- Built for 8-hour continuous duty cycles.
- Conventional lead-acid: the most proven and economical technology.
- Long service life in fleets and warehouses.
- High tolerance to vibration and industrial use.
What the Q-Battery 8DC-190 is for
Designed for forklifts, pallet trucks, stackers and aerial work platforms, the Q-Battery 8DC-190 withstands the vibration and industrial use of a warehouse. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 31.60 kg and ET terminals.
Dimensions, polarity and mounting
In terms of format, the Q-Battery 8DC-190 measures 260 × 180 × 275 mm (length × width × height) and weighs 31.60 kg. It uses ET terminals, the system that anchors and connects it in the vehicle. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.
The Q-Battery 8DC-190: Deep Cycle Battery range and conventional lead-acid technology
The 8DC-190 is part of the Q-Battery Deep Cycle Battery range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.
In a conventional battery the electrolyte is liquid and the lead plates are immersed in it. It is a mature, economical and easily recycled technology, ideal for starting vehicles in normal use.
Why choose Q-Battery batteries
Q-Battery specialises in AGM and GEL VRLA batteries for UPS, telecoms, solar and deep cycling, with long-life and tubular-plate series for industrial use. All the Q-Battery batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.
Official warranty
The Q-Battery 8DC-190 comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.
How to make it last longer
Follow the manufacturer's charging regime and do not interrupt full charging cycles. On batteries with filler caps, check the electrolyte level and top up only with distilled water.
Delivery times and returns
Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.
BCOM-Q-BATTERY-8DC-190
Data sheet
- Brand
- Q-Battery
- Reference
- 8DC-190
- Model
- DEEP CYCLE BATTERY
- Voltage (V)
- 8
- Length
- 260.00 cm
- Width
- 180.00 cm
- Height
- 275.00 cm
- Weight
- 31.60 Kgs
- Technology
- Lead-acid
- Terminal type
- ET
- Capacity (C20)
- 190Ah (c20)
Specific References
- EAN13
- 4250889600167
- MPN
- 8DC-190
Codes and references Q-battery 8DC-190
| Brand | Q-battery |
|---|---|
| Manufacturer range | DEEP CYCLE BATTERY |
| Manufacturer reference (MPN) | 8DC-190 |
| Also known as | 8DC190 · 8DC 190 |
| EAN-13 barcode | 4250889600167 |
| Dimensions (length × width × height) | 260 × 180 × 275 mm (260x180x275) |
Comparison: Q-battery BATTERY-8DC-190 vs equivalents
The Q-battery BATTERY-8DC-190 is interchangeable with these equivalent references: BATTERY-8DC-170 (Q-battery).
| Product | Specifications | Technology | Price |
|---|---|---|---|
Q-battery
BATTERY-8DC-190
This battery
|
8V 190Ah | Lead-acid | €433.90 |
Q-battery
BATTERY-8DC-170
|
8V 170Ah | Lead-acid | €362.10 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Recommended accessories
How to change the battery
Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.
Step 1. Power off and unplug the device
Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.
Step 2. Locate the battery compartment
Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.
Step 3. Disconnect the negative (−) first
With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.
Step 6. Fit the new battery
Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.
Step 7. Connect the positive (+) first
On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.
Step 8. Initial charge before first use
Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.
Frequently asked questions
How do I change this battery step by step?
In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How many years does this battery last?
Expected lifespan of the Q-battery 8DC-190 is 4 to 6 years in regular device use without Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Q-battery 8DC-190 battery?
Dimensions (length × width × height) are 260×180×275 mm — also written as 260x180x275 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Which batteries are equivalent to the Q-battery 8DC-190?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.