Tudor TG2253 · Truck battery 12V 225Ah 1200A
Specifications
| Brand | TUDOR |
|---|---|
| Part number | TG2253 |
| Voltage (V) | 12 |
| Capacity (C20) | 225Ah (c20) |
| Cold cranking amps (EN) | 1200A |
| Technology | Flooded |
| Length | 518.00 mm |
| Width | 274.00 mm |
| Height | 240.00 mm |
€189.95
VAT included
Tudor TG2253 12V 225Ah 1200A is an SHD (Super Heavy Duty) truck battery for intensive professional use. Vibration-resistant, withstands long cold-diesel cranks and deep discharges during parking with active loads (tachograph, refrigeration, heater).
Why this truck battery?
- True Heavy Dutybuilt for intensive professional use
- Long cold-diesel cranksreliable even in extreme cold
- Powers services at idletachograph, heater and lights with engine off
Voltage
12 V
Capacity
225 Ah
Cold cranking
1200 A
Dimensions
518×274×240 mm
Technology
Lead-acid
Polarity
Positive on the left
Weight
54,9 kg
Model
TUDOR START PRO (HD)
Truck battery Tudor TG2253 Start PRO (Hd) 225Ah 1,200A 12V
12VVoltage
225AhCapacity
1,200ACold cranking
54.90kgWeight
With 225 Ah and 1,200 A of cold cranking current (EN), the Tudor TG2253 from the Start PRO (Hd) range is built for professional use in trucks, buses, tractors and heavy machinery. Its 518 × 274 × 240 mm and the positive terminal on the left make it the exact replacement for the 225 Ah battery fitted as standard to many trucks.
- Better tolerance to deep discharge than a conventional starter battery.
- Powers tachograph, fridge and heater during rest stops.
- Resistant to constant chassis vibration.
- Good balance of capacity, cranking power and price.
What the Tudor TG2253 is for
With 225 Ah, the Tudor TG2253 cranks large-displacement diesel engines in the cold and powers tachograph, fridge and heater during rest stops. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 54.90 kg, EN taper post terminals and B0 hold-down.
Will it fit your current battery tray?
In terms of format, the Tudor TG2253 measures 518 × 274 × 240 mm (length × width × height) and weighs 54.90 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B0 hold-down and EN taper post terminals, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.
What Tudor does differently
Tudor is Spain's historic battery brand, today part of the Exide group. Its car, truck, motorcycle and leisure ranges are built with the same technology and controls as the group's original-equipment references. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.
The Tudor TG2253: Start PRO (Hd) range and conventional lead-acid technology
The TG2253 is part of the Tudor Start PRO (Hd) range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.
The conventional lead-acid battery remains the most widespread technology thanks to its balance of capacity, cranking current and price. Well maintained and kept charged, it offers years of reliable service in vehicles without Start-Stop.
Usage and maintenance tips
During rest stops with active loads, avoid repeated deep discharges: they shorten the life of any starter battery. Keep the terminals clean and tight and the battery firmly secured against chassis vibration.
Official warranty
The Tudor TG2253 comes with the manufacturer's official warranty against manufacturing defects. An important note for commercial vehicles: most trucks use two batteries connected in series (24 V installation). If you replace only one, the new battery works alongside the old one, which has already lost capacity; that imbalance shortens its life and the manufacturer may treat it as misuse. Always replace both at the same time.
Shipping, delivery and returns
Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.
BCOM-TUDOR-TG2253
Data sheet
- Brand
- TUDOR
- Reference
- TG2253
- Model
- TUDOR START PRO (HD)
- Voltage (V)
- 12
- Length
- 518.00 mm
- Width
- 274.00 mm
- Height
- 240.00 mm
- Weight
- 54.90 Kgs
- Technology
- Flooded
- EAN
- 3661024057431
- Terminal layout
- Positive terminal on the left
- Terminal type
- EN taper post
- Hold-down
- B0
- Cold cranking amps (EN)
- 1200A
- Capacity (C20)
- 225Ah (c20)
- Case type
- D06
Specific References
- EAN13
- 3661024057431
- MPN
- TG2253
Codes and references Tudor TG2253
| Brand | Tudor · see all Tudor batteries |
|---|---|
| Manufacturer range | ProMotive SLI (formerly ProMotive HD) |
| Manufacturer part number (MPN) | TG2253 |
| Also known as | 725103115 · Tudor ProMotive HD TG2253 · Tudor ProMotive SLI TG2253 |
| ETN code | 725103115A722 (short form 725 103 115) |
| EAN-13 barcode | 3661024057431 |
| Dimensions (length × width × height) | 518 × 274 × 240 mm (518x274x240) |
Comparison: Tudor TG2253 vs equivalents
The Tudor TG2253 is interchangeable with these equivalent references: N9 (Varta), EG2153 (Exide), EG2253 (Exide), N5 (Varta), N2 (Varta).
| Product | Specifications | Technology | Price |
|---|---|---|---|
Tudor
TG2253
This battery
|
12V 225Ah 1150A | Lead-acid | €189.95 |
Varta
N9
|
12V 225Ah 1150A | Lead-acid | €231.95 |
Exide
EG2153
|
12V 215Ah 1200A | Lead-acid | €749.95 |
Exide
EG2253
|
12V 225Ah 1150A | Lead-acid | €200.95 |
Varta
N5
|
12V 220Ah 1150A | Lead-acid | €286.20 |
Varta
N2
|
12V 200Ah 1050A | Lead-acid | €283.20 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Recommended accessories
Compatible vehicles
The Tudor TG2253 fits 355 vehicles. Most searched below:
MERCEDES-BENZAROCS2013MANTGS I2005IVECOSTRALIS II2012SCANIA4 - series1995MERCEDES-BENZANTOS2012VOLVOFMX2010SETRASeries 4002001DAFXF2012VOLVOFH2005DAFCF2013MANHOCL1990IVECOSTRALIS I2002
See all 355 compatible vehicles 
How to change the battery
Guide to replace a truck battery in 30-60 minutes. Truck batteries weigh 25-50 kg — we recommend working in pairs and using a carrying strap.
Step 1. Prepare the vehicle
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
Step 2. Locate the battery
Open the bonnet. The battery is usually in the engine bay, but in many modern cars it may be in the boot or under the passenger seat. Check the manual if you cannot find it.
Step 3. Disconnect the negative (−) terminal
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery (two people)
Loosen the bottom hold-down clamp. Truck batteries weigh 25-50 kg — lift in pairs with gloves and a carrying strap. Forcing the lift alone risks back injury.
Step 6. Install the new battery
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Step 7. Connect the cables
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Step 8. Verify the engine starts
Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.
Frequently asked questions
How do I change this battery step by step?
In most trucks it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On trucks with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
What is the service life of the TG2253 model?
Expected lifespan of the Tudor TG2253 is 4 to 6 years in regular truck use without Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Tudor TG2253 battery?
Dimensions (length × width × height) are 518×274×240 mm — also written as 518x274x240 mm — following the European DIN standard. Always measure the space in your truck before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Will the Tudor TG2253 battery fit my truck?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The TG2253 fits 355 verified vehicle versions in our database.
What are the equivalents of the TG2253 model?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop trucks. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.