Varta J1 · Truck battery 12V 125Ah 720A

Varta J1 ProMotive SLI (formerly ProMotive HD) 125Ah 720A 12V Lorry Battery

The Varta J1 lorry battery is the 12 V, 125 Ah model delivering 720 A of cold cranking power (EN), from Varta's ProMotive SLI (formerly ProMotive HD) range, designed for lorries, buses, large vans and machinery. Measuring 349 × 175 × 290 mm with the positive terminal on the right, it is the direct replacement for lorries that leave the factory with a 125 Ah battery in this format.

In short: the Varta J1 (125 Ah, 720 A, 349 × 175 × 285 mm, positive terminal on the right). Verified equivalent alternatives: Exide EG1250 and Tudor TG1250.

• Withstands the vibration of thousands of kilometres on the road.
• High cranking current for large-capacity diesel engines.
• Dependable through repeated starts and while powering cab equipment.
• Reinforced grids and casing for the severe demands of haulage.

Vehicles compatible with the Varta J1 battery

The Varta J1 is compatible with more than 511 vehicles: it is fitted as standard or as a replacement by makes such as J C Bamford (jcb), JCB, Massey Ferguson, Fiat, Volvo and Atlas. It is a benchmark choice when you need a battery for a J C Bamford (jcb), a JCB or other models built around this same format. The compatibility list also includes models from Case, Matbro, Holman, Aveling Barford, International-Harvester, Allis-Chalmers, Ford and Case International.

Format and fitting of the Varta J1

In format, the Varta J1 measures 349 × 175 × 290 mm (length × width × height) and weighs 31.22 kg. The positive terminal on the right determines which side the cables end up on: this is the detail behind more wrong purchases than any other, so it is worth checking before you order. It takes a B00 hold-down and terminal 1, the system that anchors it to the vehicle's battery tray. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.

The Varta J1 and the ProMotive SLI range

The ProMotive SLI series is Varta's starter line for professional transport, bringing the former ProMotive HD and SHD together under a single name. It is built to crank large-capacity diesel engines and to take the daily punishment of the lorry, the bus and site machinery.

The key to this range is sheer toughness: reinforced plates and mountings that resist thousands of kilometres of vibration and deep discharge cycles, keeping fleet downtime from starting failures to a minimum.

Commercial vehicles demand high cranking current and endurance against the vibration of thousands of kilometres. This series uses reinforced grids and a robust construction to cope with repeated starts of large diesel engines and with the draw of the cab's auxiliary equipment. This battery used to belong to Varta's ProMotive HD or ProMotive SHD range; following the brand's commercial renaming (2025), it now forms part of the new ProMotive SLI series.

Why choose a Varta battery

Choosing Varta means sticking with the reference the vehicle manufacturer itself signed off in the first place. Against own-brand batteries, the difference is not the purchase price but how many winters the battery lasts before it leaves you stranded.

Varta batteries are made under the Clarios group with German technology and quality controls that make them one of the best-selling choices in Europe. As a lead battery, it is 100% recyclable through any collection point.

Varta's production combines automated lines with verification of more than 100 parameters per unit; that traceability is what underpins its reputation for reliable starting throughout the battery's life.

Manufacturer's warranty

The Varta J1 battery comes with the official manufacturer warranty. An important warning for commercial vehicles: most lorries run two batteries connected in series (a 24 V installation). If you replace only one, the new battery ends up working alongside the old one — which has already lost capacity and has higher internal resistance — and that imbalance means one overcharges while the other falls short, shortens the life of the new unit and may be treated by the manufacturer as improper use, voiding the warranty. That is why it is always advisable to change both batteries at the same time.

Care and maintenance

In professional use, checking the state of charge and the battery hold-down regularly prevents breakdowns on the road. Vibration and the high temperatures of the engine bay are what shortens a battery's life most, so secure mounting is key. Keeping the terminals clean and tight and checking the charging system extends battery life in vehicles that clock up long hours. A well-maintained battery reduces the risk of downtime caused by a battery that will not start the engine.