Kronobat HD-200.3 · Truck battery 12V 200Ah 1050A
Specifications
| Brand | KRONOBAT |
|---|---|
| Part number | HD-200.3 |
| Voltage (V) | 12 |
| Capacity (C20) | 200Ah (c20) |
| Technology | Lead-acid |
| Length | 518.00 mm |
| Width | 276.00 mm |
| Height | 242.00 mm |
| Weight | 53.61 Kgs |
€165.50
VAT included
Kronobat HD-200.3 12V 200Ah 1050A is a professional battery for heavy commercial vehicles. Withstands constant chassis vibration, supports long cold-engine cranks and keeps auxiliary services running (tachograph, heater, refrigeration, GPS) during driver's mandatory rest stops.
Why this truck battery?
- True Heavy Dutybuilt for intensive professional use
- Long cold-diesel cranksreliable even in extreme cold
- Powers services at idletachograph, heater and lights with engine off
Voltage
12 V
Capacity
200 Ah
Cold cranking
1050 A
Dimensions
518×276×242 mm
Technology
Lead-acid
Polarity
Positive on the left
Weight
53,61 kg
Model
PROMOTIVE STANDARD
Truck battery Kronobat HD-200.3 Promotive Standard 200Ah 1,050A 12V
12VVoltage
200AhCapacity
1,050ACold cranking
53.61kgWeight
The Kronobat HD-200.3 with conventional lead-acid technology delivers 200 Ah at 12 V and 1,050 A of cold cranking current (EN): what trucks, buses, tractors and heavy machinery demand. It replaces the original battery without adaptation in trucks with a 518 × 276 × 242 mm format: same 200 Ah capacity and the positive terminal on the left.
- Conventional lead-acid: the most proven and economical technology.
- Heavy Duty construction for intensive professional use.
- Powerful cold cranking for large-displacement diesel engines.
- Designed for 24 V installations with two batteries in series.
What the Kronobat HD-200.3 is for
Designed for trucks, buses, tractors and heavy machinery, the Kronobat HD-200.3 withstands constant chassis vibration and discharges during stops with active loads. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 53.61 kg and 1.0 terminals.
Will it fit your current battery tray?
It has external dimensions of 518 × 276 × 242 mm and weighs 53.61 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses 1.0 terminals, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.
What Kronobat does differently
Kronobat is the exclusive brand of baterias.com: batteries made to the same production standards as the leading brands, with a value for money that is hard to match and an official warranty. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.
The Kronobat HD-200.3: Promotive Standard range and conventional lead-acid technology
Within the Kronobat catalogue, the Promotive Standard series groups the references designed for this use. The HD-200.3 is the 200 Ah model of that family, with the same performance as its siblings in other sizes.
Conventional lead-acid is the benchmark against which other technologies are compared: good cranking current, great tolerance to alternator charging and the best price per amp-hour.
How to make it last longer
On batteries with filler caps, check the electrolyte level and top up only with distilled water. Keep the terminals clean and tight and the battery firmly secured against chassis vibration.
Manufacturer's warranty
The Kronobat HD-200.3 comes with the manufacturer's official warranty against manufacturing defects. An important note for commercial vehicles: most trucks use two batteries connected in series (24 V installation). If you replace only one, the new battery works alongside the old one, which has already lost capacity; that imbalance shortens its life and the manufacturer may treat it as misuse. Always replace both at the same time.
Delivery times and returns
Orders placed before 6:00 pm with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 24-48 working hours; for the Balearic and Canary Islands and the rest of the European Union allow 3 to 5 working days. You have 14 days to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.
BCOM-KRONOBAT-HD-200.3
Data sheet
- Reference
- HD-200.3
- Model
- PROMOTIVE STANDARD
- Voltage (V)
- 12
- Length
- 518.00 mm
- Width
- 276.00 mm
- Height
- 242.00 mm
- Weight
- 53.61 Kgs
- Technology
- Lead-acid
- Terminal layout
- Positive terminal on the left
- Terminal type
- 1.0
- Cold cranking amps (EN)
- 1050A
- Capacity (C20)
- 200Ah (c20)
Specific References
- MPN
- HD-200.3
Comparison: Kronobat HD-200.3 vs equivalents
The Kronobat HD-200.3 is interchangeable with these equivalent references: N2 (Varta).
| Product | Specifications | Technology | Price |
|---|---|---|---|
Kronobat
HD-200.3
This battery
|
12V 200Ah 1050A | Lead-acid | €165.50 |
Varta
N2
|
12V 200Ah 1050A | Lead-acid | €283.20 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Recommended accessories
How to change the battery
Guide to replace a truck battery in 30-60 minutes. Truck batteries weigh 25-50 kg — we recommend working in pairs and using a carrying strap.
Step 1. Prepare the vehicle
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
Step 2. Locate the battery
Open the bonnet. The battery is usually in the engine bay, but in many modern cars it may be in the boot or under the passenger seat. Check the manual if you cannot find it.
Step 3. Disconnect the negative (−) terminal
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery (two people)
Loosen the bottom hold-down clamp. Truck batteries weigh 25-50 kg — lift in pairs with gloves and a carrying strap. Forcing the lift alone risks back injury.
Step 6. Install the new battery
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Step 7. Connect the cables
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Step 8. Verify the engine starts
Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.
Frequently asked questions
How is the Kronobat HD-200.3 battery installed in the vehicle?
In most trucks it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On trucks with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
What is the service life of the HD-200.3 model?
Expected lifespan of the Kronobat HD-200.3 is 4 to 6 years in regular truck use without Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Kronobat HD-200.3 battery?
Dimensions (length × width × height) are 518×276×242 mm — also written as 518x276x242 mm — following the European DIN standard. Always measure the space in your truck before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Does this battery fit my truck?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The HD-200.3 typically fits a wide range of European vehicles thanks to its standard DIN case format.
Which interchangeable batteries are there for this one?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop trucks. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.