Fullriver DC120-12B · Marine battery 12V 120Ah 760A AGM

Battery FULLRIVER DC120-12B 12V 120Ah
search
  • Battery FULLRIVER DC120-12B 12V 120Ah

Specifications

BrandFULLRIVER
Part numberDC120-12B
Voltage (V)12
Capacity (C20)120Ah (c20)
Capacity (C5)98Ah (c5)
TechnologyAGM
Length331.00 mm
Width175.00 mm
Height218.00 mm
See the full specifications →
€422.20
VAT included
Quantity

  • 24-48h delivery
  • 14-day returns
  • Secure payment
  • +11,800 reviews

Brand FULLRIVER Reference DC120-12B

4,75· 26 reseñas
4,75/5★★★★★26 reviewsVerified purchases
  • ★★★★Alberto Gil: Me ayudaron a elegir mi batería y, además, me ayudaron en la instalación
  • ★★★★★Luis Prieto: Estupenda pagina web
  • ★★★★★Victor Manuel Nieto: Esta web tiene un gran servicio al cliente.
See all 26 reviews

Fullriver DC120-12B 12V 120Ah 760A is a marine battery with reinforced anti-vibration case for moorings and offshore use. Tolerates the typical daily cycles on a boat (engine start + night-time services such as lights, sonar, fridge) and holds voltage even when the hull is rolling in open sea.

Why this marine battery?

  • Marine designbuilt for boat swell and vibration
  • Dual functionstarts the engine and powers onboard services
  • Sealed and safemaintenance-free even when the boat rolls
Voltage
12 V
Capacity
120 Ah C20
Cold cranking
760 A EN-1
Dimensions
331×175×218 mm
Technology
AGM
Weight
36,5 kg
Model
DC Series
Logo Fullriver

Marine battery Fullriver DC120-12B DC 120Ah 760A 12V

12VVoltage
120AhCapacity
760ACold cranking
36.50kgWeight

With 120 Ah at 12 V and 760 A of cold cranking current (EN), the Fullriver DC120-12B from the DC range is built for motor and sailing boats, both for engine starting and onboard services. Measuring 331 × 175 × 218 mm, it is the direct replacement for boats fitted from the factory with a 120 Ah battery of this format.

  • Sealed: no spills or gases in the locker.
  • Resistant to humidity and salt air.
  • AGM: faster recharging and better cycle resistance than a conventional battery.
  • Ready for starting outboard and inboard engines.

What the Fullriver DC120-12B is for

On board, the Fullriver DC120-12B provides 120 Ah with a case reinforced against vibration and swell. Keep the terminals clean and protected from salt humidity. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 36.50 kg and M8 terminals.

Will it fit your current battery tray?

In terms of format, the Fullriver DC120-12B measures 331 × 175 × 218 mm (length × width × height) and weighs 36.50 kg. It uses M8 terminals, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.

The Fullriver DC120-12B: DC range and AGM technology

The DC120-12B is part of the Fullriver DC range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.

In an AGM battery the electrolyte is absorbed in glass-fibre separators: there is no free liquid, it cannot spill and it can be mounted at an angle. That construction lowers internal resistance, speeds up recharging and multiplies cycle life compared with a conventional battery.

What Fullriver does differently

With its own plants and a catalogue focused on high-performance AGM, Fullriver is a familiar brand in power wheelchairs, boats and photovoltaic systems that need thousands of cycles. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.

Manufacturer's warranty

The Fullriver DC120-12B comes with the manufacturer's official warranty against manufacturing defects. Deep discharge from winter lay-up without charging is not covered.

How to make it last longer

As a service battery, avoid routine discharges below 50% to extend its cycle life. Charge with a charger that has an AGM mode: it limits the voltage and protects the glass-fibre separators.

When you get it and how to return it

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.

BCOM-FULLRIVER-DC120-12B

Data sheet

Brand
FULLRIVER
Reference
DC120-12B
Model
FULLRIVER DC
Voltage (V)
12
Length
331.00 mm
Width
175.00 mm
Height
218.00 mm
Weight
36.50 Kgs
Technology
AGM
Terminal type
M8
Cold cranking amps (EN)
760
Capacity (C20)
120Ah (c20)
Capacity (C5)
98Ah (c5)

Specific References

MPN
DC120-12B
4,75/5
★★★★★26 reviews
Verified purchases
Latest verified reviews
★★★★★Alberto Gil
25/07/2026
Me ayudaron a poner la batería

Me ayudaron a elegir mi batería y, además, me ayudaron en la instalación

★★★★★Luis Prieto
03/01/2026
Muy bueno

Estupenda pagina web

★★★★★Victor Manuel Nieto
03/01/2026
El servicio es insuperable

Esta web tiene un gran servicio al cliente.

★★★★★Sebastian Pastor
02/01/2026
Gran asesoría

Fueron de gran ayuda al momento de elegir la batería y de instalarla.

★★★★★Alberto Alonso
13/10/2025
Muchas gracias por la ayuda

Me ayudaron a elegir mi bateria y, además, me ayudaron en la instalación

Comparison: Fullriver DC120-12B vs equivalents — alternatives with the same dimensions, Ah and CCA

The Fullriver DC120-12B is interchangeable with these equivalent references: DC115-12B (Fullriver).

Product Specifications Technology Price
Fullriver DC120-12B Fullriver DC120-12B This battery ★ 4,8 12V 120Ah 760A AGM €422.20
Fullriver DC115-12B Fullriver DC115-12B ★ 4,7 12V 115Ah 605A AGM €383.30

Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.

Recommended accessories — complement the Fullriver DC120-12B with a charger or tester

How to change the battery

Guide to replace a marine battery (cranking or house) in 20-30 minutes. Moisture and vibration in marine environments require reinforced hold-downs and sealed copper terminals.

⏱ 20-30 min🛠 Tools: 10 mm or 13 mm wrench (depending on terminal) · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery compartment

    Usually under the passenger bench, engine room or a dedicated ventilated compartment. Verify the compartment is dry and well ventilated before opening.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Marine batteries are heavy (15-50 kg). If it has rope handles, use them; otherwise have a carry strap ready. Secure the new one with metal hold-downs (not plastic) to resist sea-state vibration.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify circuit + water protection

    Apply dielectric grease on terminals to prevent salt-air corrosion. Check the engine charging circuit delivers 13.8-14.4 V at 2,000 rpm.

Frequently asked questions

Is the Fullriver DC120-12B an AGM battery and what are the benefits of AGM?

Yes. The DC120-12B from Fullriver uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for boats with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions.

How is the Fullriver DC120-12B battery installed in the vehicle?

In most boats it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On boats with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

How long does the Fullriver DC120-12B battery last?

Expected lifespan of the Fullriver DC120-12B is 5 to 8 years in mild-climate boat use with Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the dimensions of the Fullriver DC120-12B battery?

Dimensions (length × width × height) are 331×175×218 mm — also written as 331x175x218 mm — following the European DIN standard. Always measure the space in your boat before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Is the DC120-12B valid for my vehicle?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The DC120-12B typically fits a wide range of European vehicles thanks to its standard DIN case format.

Which batteries are equivalent to the Fullriver DC120-12B?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop boats. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,800 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.