Fullriver DC140-12 · Marine battery 12V 140Ah 795A AGM

Battery FULLRIVER DC140-12 12V 140Ah
search
  • Battery FULLRIVER DC140-12 12V 140Ah

Specifications

BrandFULLRIVER
Part numberDC140-12
Voltage (V)12
Capacity (C20)140Ah (c20)
Capacity (C5)115Ah (c5)
TechnologyAGM
Length344.00 mm
Width172.00 mm
Height283.00 mm
See the full specifications →
€505.70
VAT included
Quantity

  • 24-48h delivery
  • 14-day returns
  • Secure payment
  • +11,900 reviews

Brand FULLRIVER Reference DC140-12

4,79· 30 reseñas
4,79/5★★★★★30 reviewsVerified purchases
  • ★★★★★Felipe Gil: Me ayudaron a elegir mi batería y, además, me ayudaron en la instalación
  • ★★★★Felipe Marquez: Esta web tiene un gran servicio al cliente.
  • ★★★★★Jorge Molina: Estupenda pagina web
See all 30 reviews

Fullriver DC140-12 12V 140Ah 795A is a marine battery, vibration- and deep-discharge resistant, suitable both for outboard engine starting and for onboard auxiliary services (navigation lights, GPS, sonar, fridge). Sealed and maintenance-free.

Why this marine battery?

  • Marine designbuilt for boat swell and vibration
  • Dual functionstarts the engine and powers onboard services
  • Sealed and safemaintenance-free even when the boat rolls
Voltage
12 V
Capacity
140 Ah C20
Cold cranking
795 A EN-1
Dimensions
341×172×289 mm
Technology
AGM
Weight
43,1 kg
Model
DC Series
Logo Fullriver

Marine battery Fullriver DC140-12 DC 140Ah 795A 12V

12VVoltage
140AhCapacity
795ACold cranking
43.10kgWeight

The Fullriver DC140-12 marine battery offers 12 V, 140 Ah and 795 A of cold cranking current (EN) from the DC range with AGM technology, designed for motor and sailing boats, both for engine starting and onboard services. It replaces the original battery without adaptation in boats with a 344 × 172 × 283 mm format: same 140 Ah capacity.

  • AGM technology: absorbed electrolyte, no spills, can be mounted at an angle.
  • Reinforced case against vibration and swell.
  • Powers onboard services: lights, sounder, GPS, fridge.
  • Tolerates the daily cycling of a boat in season.

What the Fullriver DC140-12 is for

With 140 Ah, the Fullriver DC140-12 covers motor and sailing boats, both for engine starting and onboard services. At the end of the season, charge it fully before winter storage. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 43.10 kg and AP terminals.

The Fullriver DC140-12: DC range and AGM technology

The DC140-12 is part of the Fullriver DC range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.

In an AGM battery the electrolyte is absorbed in glass-fibre separators: there is no free liquid, it cannot spill and it can be mounted at an angle. That construction lowers internal resistance, speeds up recharging and multiplies cycle life compared with a conventional battery.

Dimensions, polarity and mounting

It has external dimensions of 344 × 172 × 283 mm and weighs 43.10 kg. It uses AP terminals, the system that anchors and connects it in the vehicle. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.

What Fullriver does differently

Fullriver specialises in deep-cycle AGM batteries for mobility, marine, solar and traction. Its DC and HC series are known for their tolerance to deep discharge and long cycle life. All the Fullriver batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.

Care and maintenance

Protect the terminals with dielectric grease and check the fixing: vibration and swell loosen connections. Charge with a charger that has an AGM mode: it limits the voltage and protects the glass-fibre separators.

Manufacturer's warranty

The Fullriver DC140-12 comes with the manufacturer's official warranty against manufacturing defects. Deep discharge from winter lay-up without charging is not covered.

Shipping, delivery and returns

Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.

BCOM-FULLRIVER-DC140-12

Data sheet

Brand
FULLRIVER
Reference
DC140-12
Model
FULLRIVER DC
Voltage (V)
12
Length
344.00 mm
Width
172.00 mm
Height
283.00 mm
Weight
43.10 Kgs
Technology
AGM
Terminal type
AP
Cold cranking amps (EN)
795
Capacity (C20)
140Ah (c20)
Capacity (C5)
115Ah (c5)

Specific References

MPN
DC140-12
4,79/5
★★★★★30 reviews
Verified purchases
Latest verified reviews
★★★★★Felipe Gil
09/05/2026
Muy útil su ayuda

Me ayudaron a elegir mi batería y, además, me ayudaron en la instalación

★★★★★Felipe Marquez
11/02/2026
Muy buen servicio

Esta web tiene un gran servicio al cliente.

★★★★★Jorge Molina
28/12/2025
Todo Ok

Estupenda pagina web

★★★★★Cristian Dominguez
24/12/2025
Pude instalarla gracias a su asesoramiento

Fueron de gran ayuda al momento de elegir la batería y de instalarla.

★★★★★Alberto Guerrero
03/10/2025
Gracias por sus indicaciones

Me ayudaron a elegir mi bateria y, además, me ayudaron en la instalación

Recommended accessories — complement the Fullriver DC140-12 with a charger or tester

How to change the battery

Guide to replace a marine battery (cranking or house) in 20-30 minutes. Moisture and vibration in marine environments require reinforced hold-downs and sealed copper terminals.

⏱ 20-30 min🛠 Tools: 10 mm or 13 mm wrench (depending on terminal) · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery compartment

    Usually under the passenger bench, engine room or a dedicated ventilated compartment. Verify the compartment is dry and well ventilated before opening.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Marine batteries are heavy (15-50 kg). If it has rope handles, use them; otherwise have a carry strap ready. Secure the new one with metal hold-downs (not plastic) to resist sea-state vibration.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify circuit + water protection

    Apply dielectric grease on terminals to prevent salt-air corrosion. Check the engine charging circuit delivers 13.8-14.4 V at 2,000 rpm.

Frequently asked questions

Is this battery AGM? What is it for?

Yes. The DC140-12 from Fullriver uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for boats with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions.

How do I fit the DC140-12 model in my boat?

In most boats it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On boats with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

How many years does this battery last?

Expected lifespan of the Fullriver DC140-12 is 5 to 8 years in mild-climate boat use with Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What size is this battery?

Dimensions (length × width × height) are 341×172×289 mm — also written as 341x172x289 mm — following the European DIN standard. Always measure the space in your boat before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Does this battery fit my boat?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The DC140-12 typically fits a wide range of European vehicles thanks to its standard DIN case format.

Which batteries are equivalent to the Fullriver DC140-12?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop boats. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,900 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.