Fullriver DC224-6A · Marine battery 6V 224Ah AGM
Specifications
| Brand | FULLRIVER |
|---|---|
| Part number | DC224-6A |
| Voltage (V) | 6 |
| Capacity (C20) | 224Ah (c20) |
| Capacity (C5) | 179Ah (c5) |
| Technology | AGM |
| Length | 260.00 mm |
| Width | 180.00 mm |
| Height | 251.00 mm |
€352.30
VAT included
Fullriver DC224-6A 6V 224Ah is a marine battery, vibration- and deep-discharge resistant, suitable both for outboard engine starting and for onboard auxiliary services (navigation lights, GPS, sonar, fridge). Sealed and maintenance-free.
Why this marine battery?
- Marine designbuilt for boat swell and vibration
- Dual functionstarts the engine and powers onboard services
- Sealed and safemaintenance-free even when the boat rolls
Voltage
6 V
Capacity
224 Ah
Dimensions
260×180×251 mm
Technology
AGM
Weight
29,8 kg
Model
DC Series
Les llamé y me resolvieron varias dudas sobre la instalación de mi batería
Salvador PerezMe asesoraron en la instalación de la batería
Jose Ramon DiazNo tengo mas que palabras de agradecimiento, la batería me llego al día siguiente y me asesoraron gratis para la instalación
Daniel Serrano
Reviews originally written in Spanish
Marine battery Fullriver DC224-6A DC 224Ah 6V
6VVoltage
224AhCapacity
29.80kgWeight
With 224 Ah at 6 V, the Fullriver DC224-6A from the DC range is built for motor and sailing boats, both for engine starting and onboard services. It measures 260 × 180 × 251 mm, the format sought by anyone replacing a 224 Ah battery in boats.
- Reinforced case against vibration and swell.
- AGM technology: absorbed electrolyte, no spills, can be mounted at an angle.
- Tolerates the daily cycling of a boat in season.
- Powers onboard services: lights, sounder, GPS, fridge.
What the Fullriver DC224-6A is for
On board, the Fullriver DC224-6A provides 224 Ah with a case reinforced against vibration and swell. Keep the terminals clean and protected from salt humidity. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 29.80 kg and M8 terminals.
Dimensions, polarity and mounting
It has external dimensions of 260 × 180 × 251 mm and weighs 29.80 kg. It uses M8 terminals, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.
Fullriver: the maker behind the DC224-6A
Fullriver specialises in deep-cycle AGM batteries for mobility, marine, solar and traction. Its DC and HC series are known for their tolerance to deep discharge and long cycle life. All the Fullriver batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.
The Fullriver DC224-6A: DC range and AGM technology
The DC224-6A is part of the Fullriver DC range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.
AGM means the acid is held in a glass mat instead of floating free. That is why the battery can be installed in the cabin without gases, survives more cycles and recovers its charge quickly.
Care and maintenance
Protect the terminals with dielectric grease and check the fixing: vibration and swell loosen connections. At the end of the season, charge the battery fully and, if possible, keep it on a charger over the winter lay-up.
Manufacturer's warranty
The Fullriver DC224-6A comes with the manufacturer's official warranty against manufacturing defects. Deep discharge from winter lay-up without charging is not covered.
Delivery times and returns
Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.
BCOM-FULLRIVER-DC224-6A
Data sheet
- Brand
- FULLRIVER
- Reference
- DC224-6A
- Model
- FULLRIVER DC
- Voltage (V)
- 6
- Length
- 260.00 mm
- Width
- 180.00 mm
- Height
- 251.00 mm
- Weight
- 29.80 Kgs
- Technology
- AGM
- Terminal type
- M8
- Capacity (C20)
- 224Ah (c20)
- Capacity (C5)
- 179Ah (c5)
Specific References
- MPN
- DC224-6A
4,89/5
Latest reviews
Reviews originally written in Spanish
★★★★★Salvador Perez
07/05/2026Me asesoraron en la instalación
Les llamé y me resolvieron varias dudas sobre la instalación de mi batería
★★★★★Jose Ramon Diaz
08/04/2026Me ayudaron a instalar la batería
Me asesoraron en la instalación de la batería
★★★★★Daniel Serrano
12/02/2026Me ayudaron paso a paso
No tengo mas que palabras de agradecimiento, la batería me llego al día siguiente y me asesoraron gratis para la instalación
★★★★★Ruben Gimenez
11/02/2026Lo mejor de lo mejor
Estupenda pagina web
★★★★★Enrique Garrido
11/01/2026No tuve que esperar ni un día
Pedí la batería en Viernes y el Lunes ya la tenía aquí
★★★★★Alex Santana
06/01/2026Precios ideales, servicio inmejorable. Recomiendo
Creo que esta web es la mejor para adquirir tu batería, muy recomdable
★★★★★Victor Moya
28/12/2025Gran servicio
Te atienden fenomenal
★★★★★Luis Romero
24/12/2025Llegó en plazo
Buen tiempo de entrega. Me urgía instalar la batería a mi coche. Gracias
★★★★★Salvador Parra
21/10/2025Asesoramiento gratis
Fueron muy amables ayudándome a instalar mi FULLRIVER DC224-6A
Recommended accessories
How to change the battery
Guide to replace a marine battery (cranking or house) in 20-30 minutes. Moisture and vibration in marine environments require reinforced hold-downs and sealed copper terminals.
Step 1. Prepare the vehicle
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
Step 2. Locate the battery compartment
Usually under the passenger bench, engine room or a dedicated ventilated compartment. Verify the compartment is dry and well ventilated before opening.
Step 3. Disconnect the negative (−) terminal
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Marine batteries are heavy (15-50 kg). If it has rope handles, use them; otherwise have a carry strap ready. Secure the new one with metal hold-downs (not plastic) to resist sea-state vibration.
Step 6. Install the new battery
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Step 7. Connect the cables
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Step 8. Verify circuit + water protection
Apply dielectric grease on terminals to prevent salt-air corrosion. Check the engine charging circuit delivers 13.8-14.4 V at 2,000 rpm.
Frequently asked questions
Is the DC224-6A model AGM? What does this technology offer?
Yes. The DC224-6A from Fullriver uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for boats with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions.
How do I fit the DC224-6A model in my boat?
In most boats it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On boats with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How long does the Fullriver DC224-6A battery last?
Expected lifespan of the Fullriver DC224-6A is 5 to 8 years in mild-climate boat use with Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Fullriver DC224-6A battery?
Dimensions (length × width × height) are 260×180×251 mm — also written as 260x180x251 mm — following the European DIN standard. Always measure the space in your boat before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Is the DC224-6A valid for my vehicle?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The DC224-6A typically fits a wide range of European vehicles thanks to its standard DIN case format.
What are the equivalents of the DC224-6A model?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop boats. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.