Deta DG1105 StartPRO · Truck battery 110Ah 760A

Truck battery Deta DG1105 StartPRO 110Ah 760A 12V

With 110 Ah and 760 A of cold cranking current (EN), the Deta DG1105 from the StartPRO range is built for professional use in trucks, buses, tractors and heavy machinery. Measuring 514 × 175 × 210 mm and the positive terminal on the left, it is the direct replacement for trucks fitted from the factory with a 110 Ah battery of this format.

In short: the Deta DG1105 (110 Ah, 760 A, 514 × 175 × 210 mm, positive terminal on the left). Verified equivalent alternatives: Varta I2 and Tudor TG1355.

• Powers tachograph, fridge and heater during rest stops.
• Better tolerance to deep discharge than a conventional starter battery.
• Good balance of capacity, cranking power and price.
• Resistant to constant chassis vibration.

What the Deta DG1105 is for

The Deta DG1105 is designed for trucks, buses, tractors and heavy machinery. In 24 V installations with two batteries in series, replace both at the same time to avoid imbalance. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 33.50 kg, EN taper post terminals and B3 hold-down.

Dimensions, polarity and mounting

The Deta DG1105 is made in the 514 × 175 × 210 mm format and weighs 33.50 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B3 hold-down and EN taper post terminals, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.

Deta: the maker behind the DG1105

Deta combines German engineering with Exide's industrial capacity. Its Power, Senator and PowerPRO series cover everything from urban cars to construction machinery. All the Deta batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.

The Deta DG1105: StartPRO range and conventional lead-acid technology

The DG1105 is part of the Deta StartPRO range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.

The conventional lead-acid battery remains the most widespread technology thanks to its balance of capacity, cranking current and price. Well maintained and kept charged, it offers years of reliable service in vehicles without Start-Stop.

Usage and maintenance tips

In 24 V installations, check periodically that both batteries show the same voltage; an imbalance means one is failing. Keep the terminals clean and tight and the battery firmly secured against chassis vibration.

Warranty and coverage

The Deta DG1105 comes with the manufacturer's official warranty against manufacturing defects. An important note for commercial vehicles: most trucks use two batteries connected in series (24 V installation). If you replace only one, the new battery works alongside the old one, which has already lost capacity; that imbalance shortens its life and the manufacturer may treat it as misuse. Always replace both at the same time.

Delivery times and returns

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.