Deta DJ1723 · Truck battery 12V 172Ah 1390A

Batería Deta DJ1723 172Ah - 1
search
  • Batería Deta DJ1723 172Ah - 1

Specifications

BrandDeta
Part numberDJ1723
Voltage (V)12
Capacity (C20)172Ah (c20)
TechnologyLead-acid
Length513 mm
Width223 mm
Height223 mm
Weight48.80 Kgs
See the full specifications →

This product is priced on demand to offer you the best available price at all times.

Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.

Thank you

Deta DJ1723 12V 172Ah 1390A is an SHD (Super Heavy Duty) truck battery for intensive professional use. Vibration-resistant, withstands long cold-diesel cranks and deep discharges during parking with active loads (tachograph, refrigeration, heater).

Why this truck battery?

  • True Heavy Dutybuilt for intensive professional use
  • Long cold-diesel cranksreliable even in extreme cold
  • Powers services at idletachograph, heater and lights with engine off
Voltage
12 V
Capacity
172 Ah C20
Cold cranking
1390 A EN-1
Dimensions
513×223×223 mm
Technology
Lead-acid
Polarity
Positive on the left
Weight
48,8 kg
Model
DETA PowerPRO Agriculture and Construction
Free quote, no obligation

Request a quote for your Truck battery Deta DJ1723 12V 172Ah 1390A

  • Reply in under 24 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Logo Deta

Truck battery Deta DJ1723 PowerPRO y Construction 172Ah 1,390A 12V

12VVoltage
172AhCapacity
1,390ACold cranking
48.80kgWeight

With 172 Ah and 1,390 A of cold cranking current (EN), the Deta DJ1723 from the PowerPRO y Construction range is built for professional use in trucks, buses, tractors and heavy machinery. Measuring 513 × 223 × 223 mm and the positive terminal on the left, it is the direct replacement for trucks fitted from the factory with a 172 Ah battery of this format.

  • Good balance of capacity, cranking power and price.
  • Resistant to constant chassis vibration.
  • Powers tachograph, fridge and heater during rest stops.
  • Better tolerance to deep discharge than a conventional starter battery.

Will it fit your current battery tray?

It has external dimensions of 513 × 223 × 223 mm and weighs 48.80 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B00 hold-down, the system that anchors and connects it in the vehicle. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.

What the Deta DJ1723 is for

With 172 Ah, the Deta DJ1723 cranks large-displacement diesel engines in the cold and powers tachograph, fridge and heater during rest stops. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 48.80 kg and B00 hold-down.

The Deta DJ1723: PowerPRO y Construction range and conventional lead-acid technology

The DJ1723 is part of the Deta PowerPRO y Construction range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.

The conventional lead-acid battery remains the most widespread technology thanks to its balance of capacity, cranking current and price. Well maintained and kept charged, it offers years of reliable service in vehicles without Start-Stop.

Why choose Deta batteries

Deta is the German brand of the Exide group: batteries built with original-equipment technology and a very complete range for cars, Start-Stop, trucks, motorcycles and leisure. We guarantee that every Deta arrives new, charged and with the manufacturer's full warranty.

Warranty and coverage

The Deta DJ1723 comes with the manufacturer's official warranty against manufacturing defects. An important note for commercial vehicles: most trucks use two batteries connected in series (24 V installation). If you replace only one, the new battery works alongside the old one, which has already lost capacity; that imbalance shortens its life and the manufacturer may treat it as misuse. Always replace both at the same time.

Care and maintenance

On batteries with filler caps, check the electrolyte level and top up only with distilled water. During rest stops with active loads, avoid repeated deep discharges: they shorten the life of any starter battery.

When you get it and how to return it

Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.

BCOM-DETA-DJ1723

Data sheet

Brand
DETA
Reference
DJ1723
Model
DETA PowerPRO Agriculture and Construction
Voltage (V)
12
Length
513 mm
Width
223 mm
Height
223 mm
Weight
48.80 Kgs
Technology
Lead-acid
EAN
3661024026529
Terminal layout
Positive terminal on the left
Hold-down
B00
Cold cranking amps (EN)
1390A
Capacity (C20)
172Ah (c20)
Case type
D05

Specific References

EAN13
3661024026529
MPN
DJ1723

Codes and references Deta DJ1723

Brand Deta
Manufacturer range DETA PowerPRO Agriculture and Construction
Manufacturer reference (MPN) DJ1723
EAN-13 barcode 3661024026529
Dimensions (length × width × height) 513 × 223 × 223 mm (513x223x223)

Comparison: Deta DJ1723 vs equivalents — alternatives with the same dimensions, Ah and CCA

The Deta DJ1723 is interchangeable with these equivalent references: M18 (Varta), M12 (Varta), B90 (Varta), TX1803 (Tudor), TJ1723 (Tudor).

Product Specifications Technology Price
Deta DJ1723 Deta DJ1723 This battery 12V 172Ah 1390A Lead-acid
Varta M18 Varta M18 ★ 4,8 12V 180Ah 1000A Lead-acid €182.20
Varta M12 Varta M12 ★ 4,7 12V 180Ah 1400A Lead-acid €179.40
Varta B90 Varta B90 ★ 4,8 12V 190Ah 1050A EFB €209.60
Tudor TX1803 Tudor TX1803 ★ 4,8 12V 180Ah 1000A EFB €261.95
Tudor TJ1723 Tudor TJ1723 ★ 4,9 12V 172Ah 1390A Lead-acid €830.40

Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.

Recommended accessories — complement the Deta DJ1723 with a charger or tester

How to change the battery

Guide to replace a truck battery in 30-60 minutes. Truck batteries weigh 25-50 kg — we recommend working in pairs and using a carrying strap.

⏱ 30-60 min🛠 Tools: 13 mm or 17 mm wrench (depending on make) · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery

    Open the bonnet. The battery is usually in the engine bay, but in many modern cars it may be in the boot or under the passenger seat. Check the manual if you cannot find it.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery (two people)

    Loosen the bottom hold-down clamp. Truck batteries weigh 25-50 kg — lift in pairs with gloves and a carrying strap. Forcing the lift alone risks back injury.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify the engine starts

    Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.

Frequently asked questions

How is the Deta DJ1723 battery installed in the vehicle?

In most trucks it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On trucks with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

What is the service life of the DJ1723 model?

Expected lifespan of the Deta DJ1723 is 4 to 6 years in regular truck use without Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the dimensions of the Deta DJ1723 battery?

Dimensions (length × width × height) are 513×223×223 mm — also written as 513x223x223 mm — following the European DIN standard. Always measure the space in your truck before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Does this battery fit my truck?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The DJ1723 typically fits a wide range of European vehicles thanks to its standard DIN case format.

What are the equivalents of the DJ1723 model?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop trucks. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,900 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.