Exide 12N24-4A · Motorcycle battery 12V 24Ah 220A
Specifications
| Brand | EXIDE |
|---|---|
| Part number | 12N24-4A |
| Voltage (V) | 12 |
| Capacity (C20) | 24Ah (c20) |
| Technology | Flooded |
| Length | 185.00 mm |
| Width | 125.00 mm |
| Height | 175.00 mm |
| Weight | 8.00 Kgs |
This product is priced on demand to offer you the best available price at all times.
Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.
Thank you
Exide 12N24-4A 12V 24Ah 220A is a sealed motorcycle battery ready to fit, with the JIS reference your mechanic recognises at a glance. Vibration-resistant, keeps voltage during the winter off-season and cranks first time when you take it out for a ride.
Why this motorcycle battery?
- Same JIS referenceas your bike's original — fits first time
- Sealed and ready to useno acid handling, no refills
- Survives winter storageholds charge through long off-season
Voltage
12 V
Capacity
24 Ah
Cold cranking
220 A
Dimensions
185×125×175 mm
Technology
Lead-acid
Polarity
Positive on the left
Weight
8 kg
Model
EXIDE Conventional
Mfr. reference
12N24-4A
Free quote, no obligation
Request a quote for your Motorcycle battery Exide 12N24-4A 12V 24Ah 220A
- Reply in under 24 working hours
- Best price guaranteed
Motorcycle battery Exide 12N24-4A Conventional 24Ah 220A 12V
12VVoltage
24AhCapacity
220ACold cranking
8kgWeight
With 24 Ah at 12 V and 220 A of cold cranking current (EN), the Exide 12N24-4A with conventional lead-acid technology replaces the original battery of motorcycles, scooters, quads and personal watercraft. Measuring 185 × 125 × 175 mm and the positive terminal on the left, it is the direct replacement for motorcycles fitted from the factory with a 24 Ah battery of this format.
- Holds its charge through winter storage.
- Compact and lightweight format.
- Good balance of capacity, cranking power and price.
- Sealed and ready to fit, no acid handling.
Size, terminals and hold-down of the Exide 12N24-4A
The Exide 12N24-4A is made in the 185 × 125 × 175 mm format and weighs 8 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B0 hold-down and M03 terminals, the system that anchors and connects it in the vehicle. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.
What the Exide 12N24-4A is for
The Exide 12N24-4A is a common replacement in motorcycles, scooters, quads and personal watercraft. If your bike spends the winter standing, a trickle charger stops it reaching spring flat. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 8 kg, M03 terminals and B0 hold-down.
The Exide 12N24-4A: Conventional range and conventional lead-acid technology
The Conventional is the Exide range the 12N24-4A belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.
Conventional lead-acid is the benchmark against which other technologies are compared: good cranking current, great tolerance to alternator charging and the best price per amp-hour.
Exide: the maker behind the 12N24-4A
Exide is one of the world's largest battery manufacturers and an original-equipment supplier to many car makers. Its European plants produce starter, industrial and leisure batteries under original-equipment quality controls. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.
Warranty and coverage
The Exide 12N24-4A comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.
Care and maintenance
On batteries with filler caps, check the electrolyte level and top up only with distilled water. Check the resting voltage before the season (above 12.6 V on a charged battery) and make sure the terminals are clean and tight.
When you get it and how to return it
Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.
BCOM-EXIDE-12N24-4A
Data sheet
- Brand
- EXIDE
- Reference
- 12N24-4A
- Model
- EXIDE Conventional
- Voltage (V)
- 12
- Length
- 185.00 mm
- Width
- 125.00 mm
- Height
- 175.00 mm
- Weight
- 8.00 Kgs
- Technology
- Flooded
- EAN
- 3661024033558
- Terminal layout
- Positive terminal on the left
- Terminal type
- M03
- Hold-down
- B0
- Cold cranking amps (EN)
- 220A
- Capacity (C20)
- 24Ah (c20)
- Case type
- C67
Specific References
- EAN13
- 3661024033558
- MPN
- 12N24-4A
Codes and references Exide 12N24-4A
| Brand | Exide · see all batteries Exide |
|---|---|
| Manufacturer range | EXIDE Conventional |
| Manufacturer reference (MPN) | 12N24-4A |
| EAN-13 barcode | 3661024033558 |
| Dimensions (length × width × height) | 185 × 125 × 175 mm (185x125x175) |
Comparison: Exide 12N24-4A vs equivalents
The Exide 12N24-4A is interchangeable with these equivalent references: 53034 GEL (Fulbat).
| Product | Specifications | Technology | Price |
|---|---|---|---|
Exide
12N24-4A
This battery
|
12V 24Ah 220A | Lead-acid | |
Fulbat
53034 GEL
|
€159.93 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Recommended accessories
How to change the battery
Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.
Step 1. Prepare the vehicle
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
Step 2. Locate the battery compartment
On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.
Step 3. Disconnect the negative (−) terminal
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.
Step 6. Install the new battery
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Step 7. Connect the cables
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Step 8. Verify the engine starts
Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.
Frequently asked questions
How do I fit the 12N24-4A model in my motorcycle?
In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How long does the Exide 12N24-4A battery last?
Expected lifespan of the Exide 12N24-4A is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Exide 12N24-4A battery?
Dimensions (length × width × height) are 185×125×175 mm — also written as 185x125x175 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Will the Exide 12N24-4A battery fit my motorcycle?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The 12N24-4A typically fits a wide range of European vehicles thanks to its standard DIN case format.
Which batteries are equivalent to the Exide 12N24-4A?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.