Exide ETX14AHL-BS · Motorcycle battery 12V 12Ah 210A AGM
Specifications
| Brand | EXIDE |
|---|---|
| Part number | ETX14AHL-BS |
| Voltage (V) | 12 |
| Capacity (C20) | 12Ah (c20) |
| Technology | AGM |
| Length | 135.00 cm |
| Width | 90.00 cm |
| Height | 165.00 cm |
| Weight | 4.90 Kgs |
€42.20
VAT included
Exide ETX14AHL-BS 12V 12Ah 210A is a motorcycle starter battery with standard JIS code (the one on your bike's original label). Ready to use, sealed and vibration-resistant. Fits any model that takes the same JIS reference — the code your mechanic recognises at a glance.
Why this motorcycle battery?
- Same JIS referenceas your bike's original — fits first time
- Sealed and ready to useno acid handling, no refills
- Survives winter storageholds charge through long off-season
JIS code
ETX14AHL-BS
Voltage
12 V
Capacity
12 Ah
Cold cranking
210 A
Dimensions
135×90×165 mm
Technology
AGM
Polarity
Positive on the right
Weight
4,9 kg
Model
EXIDE MOTO AGM 12V
Mfr. reference
ETX14AHL-BS
Motorcycle battery Exide ETX14AHL-BS Moto AGM 12Ah 210A 12V
12VVoltage
12AhCapacity
210ACold cranking
4.90kgWeight
The Exide ETX14AHL-BS from the Moto AGM range is a motorcycle battery with 12 Ah and 210 A of cold cranking current (EN), designed for motorcycles, scooters, quads and personal watercraft. It measures 135 × 90 × 165 mm and the positive terminal on the right, the format sought by anyone replacing a 12 Ah battery in motorcycles.
- Same JIS code as the original battery: fits first time.
- AGM technology: absorbed electrolyte, no spills, can be mounted at an angle.
- Energetic cranking for high-compression engines.
- Resistant to the vibration typical of two wheels.
What the Exide ETX14AHL-BS is for
Designed for motorcycles, scooters, quads and personal watercraft, the Exide ETX14AHL-BS replaces the original battery of bikes that use this code or format. Check the position of the positive terminal before ordering. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 4.90 kg, M04 terminals and B0 hold-down.
The Exide ETX14AHL-BS: Moto AGM range and AGM technology
The ETX14AHL-BS is part of the Exide Moto AGM range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.
AGM means the acid is held in a glass mat instead of floating free. That is why the battery can be installed in the cabin without gases, survives more cycles and recovers its charge quickly.
Will it fit your current battery tray?
It has external dimensions of 135 × 90 × 165 mm and weighs 4.90 kg. The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B0 hold-down and M04 terminals, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.
Why choose Exide batteries
Exide is one of the world's largest battery manufacturers and an original-equipment supplier to many car makers. Its European plants produce starter, industrial and leisure batteries under original-equipment quality controls. We guarantee that every Exide arrives new, charged and with the manufacturer's full warranty.
How to make it last longer
Charge with a charger that has an AGM mode: it limits the voltage and protects the glass-fibre separators. If the bike spends the winter standing, connect a trickle charger: deep discharge through inactivity is the first cause of premature failure.
Warranty and coverage
The Exide ETX14AHL-BS comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.
Delivery times and returns
Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.
BCOM-EXIDE-ETX14AHL-BS
Data sheet
- Brand
- EXIDE
- Reference
- ETX14AHL-BS
- Model
- EXIDE MOTO AGM 12V
- Voltage (V)
- 12
- Length
- 135.00 cm
- Width
- 90.00 cm
- Height
- 165.00 cm
- Weight
- 4.90 Kgs
- Technology
- AGM
- EAN
- 3661024033787
- Terminal layout
- Positive terminal on the right
- Terminal type
- M04
- Hold-down
- B0
- Cold cranking amps (EN)
- 210A
- Capacity (C20)
- 12Ah (c20)
Specific References
- EAN13
- 3661024033787
- MPN
- ETX14AHL-BS
Codes and references Exide ETX14AHL-BS
| Brand | Exide · see all batteries Exide |
|---|---|
| Manufacturer range | EXIDE MOTO AGM 12V |
| Manufacturer reference (MPN) | ETX14AHL-BS |
| Also known as | ETX14AHLBS · ETX14AHL BS |
| EAN-13 barcode | 3661024033787 |
| Dimensions (length × width × height) | 135 × 90 × 165 mm (135x90x165) |
| Not to be confused with | ETX14-BS (reversed polarity, different size) · ETX14L-BS (different size) · ETX14AH-BS (reversed polarity) · YTX14H (reversed polarity, different size) |
Comparison: Exide ETX14AHL-BS vs equivalents
The Exide ETX14AHL-BS is interchangeable with these equivalent references: AGM12-14 (Exide), 512908021 (Varta).
| Product | Specifications | Technology | Price |
|---|---|---|---|
Exide
ETX14AHL-BS
This battery
|
12V 12Ah 210A | AGM | €42.20 |
Exide
AGM12-14
|
12V 12Ah 210A | AGM | €53.30 |
Varta
512908021
|
12V 12Ah 210A | AGM | €55.80 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Recommended accessories
How to change the battery
Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.
Step 1. Prepare the vehicle
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
Step 2. Locate the battery compartment
On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.
Step 3. Disconnect the negative (−) terminal
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.
Step 6. Install the new battery
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Step 7. Connect the cables
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Step 8. Verify the engine starts
Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.
Frequently asked questions
Is this battery AGM? What is it for?
Yes. The ETX14AHL-BS from Exide uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for motorcycles with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions.
How do I fit the ETX14AHL-BS model in my motorcycle?
In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
What is the service life of the ETX14AHL-BS model?
Expected lifespan of the Exide ETX14AHL-BS is 5 to 8 years in mild-climate motorcycle use with Start-Stop. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What are the dimensions of the Exide ETX14AHL-BS battery?
Dimensions (length × width × height) are 135×90×165 mm — also written as 135x90x165 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Does this battery fit my motorcycle?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The ETX14AHL-BS typically fits a wide range of European vehicles thanks to its standard DIN case format.
Which batteries are equivalent to the Exide ETX14AHL-BS?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.