Exide GEL12-30 · Motorcycle battery 12V 30Ah 180A GEL
Specifications
| Brand | EXIDE |
|---|---|
| Part number | GEL12-30 |
| Voltage (V) | 12 |
| Capacity (C20) | 30Ah (c20) |
| Cold cranking amps (EN) | 180A |
| Technology | GEL |
| Length | 197.00 cm |
| Width | 132.00 cm |
| Height | 186.00 cm |
€126.90
VAT included
Exide GEL12-30 12V 30Ah 180A is a sealed motorcycle battery ready to fit, with the JIS reference your mechanic recognises at a glance. Vibration-resistant, keeps voltage during the winter off-season and cranks first time when you take it out for a ride.
Why this motorcycle battery?
- Same JIS referenceas your bike's original — fits first time
- Sealed and ready to useno acid handling, no refills
- Survives winter storageholds charge through long off-season
JIS code
GEL12-30
Voltage
12 V
Capacity
30 Ah
Cold cranking
180 A
Dimensions
197×132×186 mm
Technology
GEL
Polarity
Positive on the left
Weight
11,1 kg
Model
EXIDE MOTO GEL 12V
Mfr. reference
GEL12-30
Pedí la batería un jueves a las 4 y me llegó el viernes a las 7
Julian GomezMe asesoraron en todo, excelente servicio
Alex CastilloMuy buena atención. Gracias
David Lozano
Reviews originally written in Spanish
Motorcycle battery Exide GEL12-30 Moto GEL 30Ah 180A 12V
12VVoltage
30AhCapacity
180ACold cranking
11.10kgWeight
The Exide GEL12-30 from the Moto GEL range is a motorcycle battery with 30 Ah and 180 A of cold cranking current (EN), designed for motorcycles, scooters, quads and personal watercraft. It replaces the original battery without adaptation in motorcycles with a 197 × 132 × 186 mm format: same 30 Ah capacity and the positive terminal on the left.
- GEL technology: gelled electrolyte, fully sealed and maintenance-free.
- Same JIS code as the original battery: fits first time.
- Resistant to the vibration typical of two wheels.
- Energetic cranking for high-compression engines.
Will it fit your current battery tray?
In terms of format, the Exide GEL12-30 measures 197 × 132 × 186 mm (length × width × height) and weighs 11.10 kg. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses a B0 hold-down and EN full Ford lug terminals, the system that anchors and connects it in the vehicle. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.
What the Exide GEL12-30 is for
The Exide GEL12-30 is a common replacement in motorcycles, scooters, quads and personal watercraft. If your bike spends the winter standing, a trickle charger stops it reaching spring flat. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 11.10 kg, EN full Ford lug terminals and B0 hold-down.
The Exide GEL12-30: Moto GEL range and GEL technology
The GEL12-30 is part of the Exide Moto GEL range. Choosing the right reference within the series comes down to capacity, dimensions and terminals: technology and quality are common to the whole family.
A GEL battery is the choice when cycle resistance and safety matter most: no gases, no liquid and thousands of partial discharges in its lifetime.
Exide: the maker behind the GEL12-30
Exide is one of the world's largest battery manufacturers and an original-equipment supplier to many car makers. Its European plants produce starter, industrial and leisure batteries under original-equipment quality controls. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.
Official warranty
The Exide GEL12-30 comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.
Care and maintenance
GEL batteries need lower charging voltages: always use a charger with a GEL mode so as not to damage the electrolyte. Check the resting voltage before the season (above 12.6 V on a charged battery) and make sure the terminals are clean and tight.
Shipping, delivery and returns
Orders placed before 6:00 pm with the battery in stock ship the same day. Delivery in mainland Spain and Portugal takes 24-48 working hours; for the Balearic Islands and the rest of the European Union allow 3 to 5 working days. You have 14 days to return an unused battery; in mainland Spain and Portugal collection is free. We email you the tracking number as soon as the parcel ships.
BCOM-EXIDE-GEL12-30
Data sheet
- Brand
- EXIDE
- Reference
- GEL12-30
- Model
- EXIDE MOTO GEL 12V
- Voltage (V)
- 12
- Length
- 197.00 cm
- Width
- 132.00 cm
- Height
- 186.00 cm
- Weight
- 11.10 Kgs
- Technology
- GEL
- EAN
- 3661024034081
- Terminal layout
- Positive terminal on the left
- Terminal type
- EN full Ford lug
- Hold-down
- B0
- Cold cranking amps (EN)
- 180A
- Capacity (C20)
- 30Ah (c20)
Specific References
- EAN13
- 3661024034081
- MPN
- GEL12-30
4,40/5
Latest reviews
Reviews originally written in Spanish
★★★★★Julian Gomez
05/07/2026Rapidez en la entrega
Pedí la batería un jueves a las 4 y me llegó el viernes a las 7
★★★★★Alex Castillo
28/01/2026Servicio sobresaliente
Me asesoraron en todo, excelente servicio
★★★★★David Lozano
13/01/20265 estrellas, Gracias
Muy buena atención. Gracias
★★★★★Jose Ramon Carmona
08/01/2026De lo mejor
En general todo bien
★★★★★Francisco Nieto
10/11/2025Recibida en menos de 24 horas
Pedí la bateria un jueves a las 4 y me llegó el viernes a las 2
Codes and references Exide GEL12-30
| Brand | Exide · see all Exide batteries |
|---|---|
| Manufacturer range | EXIDE MOTO GEL 12V |
| Manufacturer part number (MPN) | GEL12-30 |
| Also known as | GEL1230 · GEL12 30 |
| EAN-13 barcode | 3661024034081 |
| Dimensions (length × width × height) | 197 × 132 × 186 mm (197x132x186) |
Recommended accessories
How to change the battery
Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.
Step 1. Prepare the vehicle
Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.
Step 2. Locate the battery compartment
On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.
Step 3. Disconnect the negative (−) terminal
Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.
Step 4. Disconnect the positive (+) terminal
Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.
Step 5. Remove the old battery
Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.
Step 6. Install the new battery
Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.
Step 7. Connect the cables
Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.
Step 8. Verify the engine starts
Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.
Frequently asked questions
Is the Exide GEL12-30 a GEL battery? What is GEL used for?
Yes, this model is a GEL battery: sealed lead-acid where the electrolyte is in gel form. It tolerates deep discharges very well and is ideal for cyclic use (solar, motorhomes, electric wheelchairs, motorcycles). Requires a GEL-specific smart charger — max charge voltage ~14.1 V (vs 14.4-14.7 V for AGM). Lifespan 6-10 years.
How is the Exide GEL12-30 battery installed in the vehicle?
In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.
How long does the Exide GEL12-30 battery last?
Expected lifespan of the Exide GEL12-30 is 6 to 10 years in cyclic use (marine, caravan, solar) with controlled discharges. In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.
What size is this battery?
Dimensions (length × width × height) are 197×132×186 mm — also written as 197x132x186 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
Is the GEL12-30 valid for my vehicle?
Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The GEL12-30 typically fits a wide range of European vehicles thanks to its standard DIN case format.
Which batteries are equivalent to the Exide GEL12-30?
Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.