Fulbat FDM12-700 · Marine battery 12V 140Ah 700A AGM CARBON

Marine battery Fulbat FDM12-700 12V 140Ah 700A AGM CARBON
search
  • Marine battery Fulbat FDM12-700 12V 140Ah 700A AGM CARBON

Specifications

BrandFULBAT
Part numberFDM12-700
Voltage (V)12V
Capacity (C20)140Ah
Cold cranking amps (EN)700A
TechnologyAGM Carbon
Length512mm
Width188mm
Height218mm
See the full specifications →

This product is priced on demand to offer you the best available price at all times.

Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.

Thank you

Fulbat FDM12-700 12V 140Ah 700A is a quality battery with official manufacturer warranty, confirmed stock and 24-48 h delivery across the peninsula.

Why this battery?

  • Tested and certifiedto European EN standards for maximum reliability
  • Sealed and maintenance-freeready to use out of the box
  • Long working lifeoptimised for its real-world use case
Voltage
12 V
Capacity
140 Ah C20
Cold cranking
700 A EN-1
Dimensions
512×188×218 mm
Technology
AGM
Polarity
Positive on the left
Free quote, no obligation

Request a quote for your Marine battery Fulbat FDM12-700 12V 140Ah 700A AGM CARBON

  • Reply in under 24 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Logo Fulbat

Marine battery Fulbat FDM12-700 140Ah 700A 12V

12VVoltage
140AhCapacity
700ACold cranking

The Fulbat FDM12-700 marine battery offers 12 V, 140 Ah and 700 A of cold cranking current (EN) with AGM technology, designed for motor and sailing boats, both for engine starting and onboard services. Its 512 × 188 × 218 mm and the positive terminal on the left make it the exact replacement for the 140 Ah battery fitted as standard to many boats.

  • Resistant to humidity and salt air.
  • Sealed: no spills or gases in the locker.
  • Ready for starting outboard and inboard engines.
  • AGM: faster recharging and better cycle resistance than a conventional battery.

Size, terminals and hold-down of the Fulbat FDM12-700

In terms of format, the Fulbat FDM12-700 measures 512 × 188 × 218 mm (length × width × height). The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses EN terminals, the system that anchors and connects it in the vehicle. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.

What the Fulbat FDM12-700 is for

The Fulbat FDM12-700 is designed for motor and sailing boats, both for engine starting and onboard services. If it is your starter battery, run the services from a separate battery; if it is a service battery, avoid routinely discharging it beyond 50%. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has EN terminals.

Technology inside the Fulbat FDM12-700

The FDM12-700 is one of the Fulbat references for this type of use; it shares the same manufacturing and quality-control criteria as the rest of the brand's catalogue.

In an AGM battery the electrolyte is absorbed in glass-fibre separators: there is no free liquid, it cannot spill and it can be mounted at an angle. That construction lowers internal resistance, speeds up recharging and multiplies cycle life compared with a conventional battery.

What Fulbat does differently

Fulbat has manufactured in France since 1978 and specialises in motorcycles and light vehicles. Its catalogue is short and clear, covers almost the whole fleet and works only with sealed, leak-free batteries. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.

Manufacturer's warranty

The Fulbat FDM12-700 comes with the manufacturer's official warranty against manufacturing defects. Deep discharge from winter lay-up without charging is not covered.

Usage and maintenance tips

Charge with a charger that has an AGM mode: it limits the voltage and protects the glass-fibre separators. At the end of the season, charge the battery fully and, if possible, keep it on a charger over the winter lay-up.

When you get it and how to return it

Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.

BCOM-FULBAT-FDM12-700

Data sheet

Brand
FULBAT
Model
FULBAT FDM Marine AGM Carbon
Voltage (V)
12V
Length
512mm
Width
188mm
Height
218mm
Technology
AGM Carbon
Terminal layout
Positive left
Terminal type
EN
Cold cranking amps (EN)
700A
Capacity (C20)
140Ah

Specific References

MPN
FDM12-700

Recommended accessories — complement the Fulbat FDM12-700 with a charger or tester

How to change the battery

Step-by-step guide to replace your car battery in 15-30 minutes (longer if the battery is under the seat or in the boot) without losing vehicle settings.

⏱ 15-30 min🛠 Tools: 10 mm wrench · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery

    Open the bonnet. The battery is usually in the engine bay, but in many modern cars it may be in the boot or under the passenger seat. Check the manual if you cannot find it.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Loosen the bottom hold-down clamp with the same wrench. Lift the battery carefully (it can weigh 15-25 kg). Clean the tray with a brush and baking soda if there is corrosion.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify the engine starts

    Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.

Frequently asked questions

How is the Fulbat FDM12-700 battery installed in the vehicle?

In most cars it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On cars with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

How long does the Fulbat FDM12-700 battery last?

Expected lifespan of the Fulbat FDM12-700 is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the dimensions of the Fulbat FDM12-700 battery?

Dimensions (length × width × height) are 512×188×218 mm — also written as 512x188x218 mm — following the European DIN standard. Always measure the space in your car before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Which interchangeable batteries are there for this one?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop cars. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +12,000 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.