Fulbat FLTX30HL · Motorcycle battery 18Ah 900A LiFePO4

Motorcycle battery Fulbat FLTX30HL 18Ah 900A LiFePO4
search
  • Motorcycle battery Fulbat FLTX30HL 18Ah 900A LiFePO4
  • Motorcycle battery Fulbat FLTX30HL 18Ah 900A LiFePO4

Specifications

BrandFULBAT
Part numberFLTX30HL
Capacity (C10)18Ah (c10)
TechnologyLiFePO4
Length168mm
Width127mm
Height177mm
Weight3.30 Kg
Terminal layoutPositive right
See the full specifications →
€357.52
VAT included
Quantity

  • 24-48h delivery
  • 14-day returns
  • Secure payment
  • +11,900 reviews

Brand FULBAT Reference FLTX30HL

Fulbat FLTX30HL 18Ah 900A is a quality battery with official manufacturer warranty, confirmed stock and 24-48 h delivery across the peninsula.

Why this battery?

  • Tested and certifiedto European EN standards for maximum reliability
  • Sealed and maintenance-freeready to use out of the box
  • Long working lifeoptimised for its real-world use case
Capacity
18 Ah C20
Cold cranking
900 A EN-1
Dimensions
168×127×177 mm
Technology
Lithium (LiFePO4)
Polarity
Positive on the right
Weight
3,3 kg
Logo Fulbat

Lithium motorcycle battery Fulbat FLTX30HL 18Ah 900A

18AhCapacity
900ACold cranking
3.30kgWeight

The Fulbat FLTX30HL lithium battery offers V and 900 A of cold cranking current (EN) in an ultra-light format designed for motorcycles and quads looking to save weight and gain cranking power. Its 168 × 127 × 177 mm and the positive terminal on the right make it the exact replacement for the 18 Ah battery fitted as standard to many motorcycles.

  • Instant cranking even after weeks of standing.
  • Built-in BMS protecting the battery and the vehicle.
  • Battery management system (BMS) protecting against overcharge and short circuit.
  • No acid, no maintenance, mounts in any position.

What the Fulbat FLTX30HL is for

The Fulbat FLTX30HL is designed for motorcycles and quads looking to save weight and gain cranking power. Check that your bike's regulator delivers a charging voltage compatible with lithium (normally up to 14.6 V). Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 3.30 kg.

Dimensions, polarity and mounting

It has external dimensions of 168 × 127 × 177 mm and weighs 3.30 kg. The positive terminal on the right decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.

Technology inside the Fulbat FLTX30HL

The FLTX30HL is one of the Fulbat references for this type of use; it shares the same manufacturing and quality-control criteria as the rest of the brand's catalogue.

Lithium iron phosphate (LiFePO4) offers far higher energy density than lead: the battery weighs a fraction, hardly self-discharges and withstands thousands of cycles. A built-in BMS monitors voltage, temperature and cell balance.

Why choose Fulbat batteries

Fulbat has manufactured in France since 1978 and specialises in motorcycles and light vehicles. Its catalogue is short and clear, covers almost the whole fleet and works only with sealed, leak-free batteries. We guarantee that every Fulbat arrives new, charged and with the manufacturer's full warranty.

Official warranty

The Fulbat FLTX30HL comes with the manufacturer's official warranty. Always charge with a LiFePO4-compatible charger: a lead-acid charger with a desulphation phase can damage it and void the warranty.

Care and maintenance

Check that the bike's regulator does not exceed 14.6 V; if the vehicle stands for long periods, an occasional maintenance charge is enough. Always use a LiFePO4-compatible charger and avoid the desulphation modes of lead-acid chargers.

When you get it and how to return it

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.

BCOM-FULBAT-FLTX30HL

Data sheet

Brand
FULBAT
Model
FULBAT Motorcycle LiFePO4
Length
168mm
Width
127mm
Height
177mm
Weight
3.30 Kg
Technology
LiFePO4
Terminal layout
Positive right
Cold cranking amps (EN)
900A
Capacity (C10)
18Ah (c10)
Energy (Wh)
230.40Wh

Specific References

MPN
FLTX30HL

Recommended accessories — complement the Fulbat FLTX30HL with a charger or tester

How to change the battery

Step-by-step guide to replace your car battery in 15-30 minutes (longer if the battery is under the seat or in the boot) without losing vehicle settings.

⏱ 15-30 min🛠 Tools: 10 mm wrench · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery

    Open the bonnet. The battery is usually in the engine bay, but in many modern cars it may be in the boot or under the passenger seat. Check the manual if you cannot find it.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Loosen the bottom hold-down clamp with the same wrench. Lift the battery carefully (it can weigh 15-25 kg). Clean the tray with a brush and baking soda if there is corrosion.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify the engine starts

    Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.

Frequently asked questions

How is the Fulbat FLTX30HL battery installed in the vehicle?

In most cars it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On cars with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

How long does the Fulbat FLTX30HL battery last?

Expected lifespan of the Fulbat FLTX30HL is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the dimensions of the Fulbat FLTX30HL battery?

Dimensions (length × width × height) are 168×127×177 mm — also written as 168x127x177 mm — following the European DIN standard. Always measure the space in your car before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Which batteries are equivalent to the Fulbat FLTX30HL?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop cars. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,900 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.