Fulbat FP12-120 · Stationary UPS battery 12V 124.8Ah AGM

Stationary UPS battery Fulbat FP12-120 12V 124.8Ah AGM
search
  • Stationary UPS battery Fulbat FP12-120 12V 124.8Ah AGM

Specifications

BrandFULBAT
Part numberFP12-120
Voltage (V)12V
Capacity (C20)124.80Ah
TechnologyAGM
Length408mm
Width177mm
Height225mm
Terminal layoutPositive left
See the full specifications →

This product is priced on demand to offer you the best available price at all times.

Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.

Thank you

Fulbat FP12-120 12V 124,8Ah is a stationary battery for backup power systems: UPS, alarms, telecom and emergency lighting. Long float-life under permanent charge and instant response to mains outages with no noticeable voltage drop.

Why this stationary battery?

  • Instant responsewhen the mains drop, no voltage dip
  • Long life under 24/7 chargeoptimised for permanent service
  • Compatible with your systemexisting UPS units and alarm control panels
Voltage
12 V
Capacity
124,8 Ah C20
Dimensions
408×177×225 mm
Technology
AGM
Polarity
Positive on the left
Free quote, no obligation

Request a quote for your Stationary UPS battery Fulbat FP12-120 12V 124.8Ah AGM

  • Reply in under 24 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Logo Fulbat

Stationary battery Fulbat FP12-120 124.8Ah 12V

12VVoltage
124.8AhCapacity

The Fulbat FP12-120 with AGM technology is a 124.8 Ah, 12 V backup battery for UPS, alarms, telecoms and emergency lighting. Measuring 408 × 177 × 225 mm and the positive terminal on the left, it is the direct replacement for UPS, alarm and emergency systems fitted from the factory with a 124.8 Ah battery of this format.

  • Low self-discharge and high reliability.
  • Standard format for UPS and emergency systems.
  • AGM: faster recharging and better cycle resistance than a conventional battery.
  • Instant response to mains failures.

What the Fulbat FP12-120 is for

Designed for UPS, alarms, telecoms and emergency lighting, the Fulbat FP12-120 is sealed, gas-free and suitable for technical cabinets and offices. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has BOLT-M6 terminals.

Will it fit your current battery tray?

The Fulbat FP12-120 is made in the 408 × 177 × 225 mm format. The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. It uses BOLT-M6 terminals, the system that anchors and connects it in the vehicle. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.

What Fulbat does differently

French brand Fulbat is a European reference in motorcycle, garden and leisure batteries: compact ranges, clear JIS codes and a consistent quality that workshops know well. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.

Technology inside the Fulbat FP12-120

Within the Fulbat catalogue, the FP12-120 is the 124.8 Ah model designed for this application.

AGM means the acid is held in a glass mat instead of floating free. That is why the battery can be installed in the cabin without gases, survives more cycles and recovers its charge quickly.

How to make it last longer

Replace all the batteries in the set at once and avoid environments continuously above 25 °C. Charge with a charger that has an AGM mode: it limits the voltage and protects the glass-fibre separators.

Official warranty

The Fulbat FP12-120 comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.

When you get it and how to return it

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.

BCOM-FULBAT-FP12-120

Data sheet

Brand
FULBAT
Model
FULBAT FP General Purpose
Voltage (V)
12V
Length
408mm
Width
177mm
Height
225mm
Technology
AGM
Terminal layout
Positive left
Terminal type
BOLT-M6
Capacity (C20)
124.80Ah

Specific References

MPN
FP12-120

Recommended accessories — complement the Fulbat FP12-120 with a charger or tester

How to change the battery

Guide to replace a cyclic battery (12V 4-30Ah) for UPS, mobility scooter, alarm or backup device. Estimated time 10-15 minutes. Important: discharge residual voltage before handling.

⏱ 10-15 min🛠 Tools: Screwdriver or small wrench (3-5 mm typical) · Protective gloves
  1. Step 1. Power off and unplug the device

    Unplug the device (UPS, scooter, alarm) and leave it off for at least 30 seconds to discharge residual capacitor voltage. Work on an insulating surface.

  2. Step 2. Locate the battery compartment

    Usually under the seat (mobility scooter/wheelchair), in the rear module of the UPS, or behind a side panel with screws. Check the device manual for unusual models.

  3. Step 3. Disconnect the negative (−) first

    With insulated gloves, remove the negative (−) cable first. Some UPS have protection fuses — note their position before removing.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Typical weight 1-15 kg depending on capacity. Many cyclic batteries are AGM/GEL — keep them upright. Do NOT invert the battery: even sealed, residue may exist.

  6. Step 6. Fit the new battery

    Same orientation and type (AGM, GEL or flooded). Polarity must match the device, not a chassis (this is not a car). Make sure terminals do not touch metal parts of the compartment.

  7. Step 7. Connect the positive (+) first

    On cyclic devices the order is reversed compared to cars: positive (+) first, negative (−) afterwards. Tighten without forcing — the plastic terminal housing of cyclic batteries damages easily.

  8. Step 8. Initial charge before first use

    Cyclic batteries ship at 60-80%. Before first use, connect the device charger for 8-12 hours (or use an AGM/GEL smart charger if available). This avoids short cycles and extends lifespan.

Frequently asked questions

How do I fit the FP12-120 model in my device?

In most devices it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On devices with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

What is the service life of the FP12-120 model?

Expected lifespan of the Fulbat FP12-120 is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What size is this battery?

Dimensions (length × width × height) are 408×177×225 mm — also written as 408x177x225 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Which interchangeable batteries are there for this one?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop devices. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,900 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.