Ritar HT12-110 · Stationary UPS battery 12V 116.4Ah AGM
Specifications
| Brand | RITAR |
|---|---|
| Part number | HT12-110 |
| Voltage (V) | 12 |
| Capacity (C20) | 116 4Ah (c20) |
| Capacity (C10) | 110Ah (c10) |
| Technology | AGM |
| Length | 407.00 mm |
| Width | 177.00 mm |
| Height | 225.00 mm |
Ritar HT12-110 12V 116Ah is a stationary battery for backup power systems: UPS, alarms, telecom and emergency lighting. Long float-life under permanent charge and instant response to mains outages with no noticeable voltage drop.
Why this stationary battery?
- Instant responsewhen the mains drop, no voltage dip
- Long life under 24/7 chargeoptimised for permanent service
- Compatible with your systemexisting UPS units and alarm control panels
Where it fits: the Ritar HT12-110 is one of our batteries for ups / ups and belongs to our Ritar batteries.

Stationary battery Ritar HT12-110 HT 116Ah 12V
The 12 V, 116 Ah Ritar HT12-110 stationary battery from the HT range with AGM technology is designed for UPS, alarms, telecoms and emergency lighting. Measuring 407 × 177 × 225 mm, it is the direct replacement for UPS, alarm and emergency systems fitted from the factory with a 116 Ah battery of this format.
- AGM: faster recharging and better cycle resistance than a conventional battery.
- Instant response to mains failures.
- Low self-discharge and high reliability.
- Standard format for UPS and emergency systems.
What the Ritar HT12-110 is for
With 116 Ah, the Ritar HT12-110 gives your UPS or emergency system the autonomy it needs. Replace all the batteries in the set at once. Check that it matches your current battery in dimensions, terminals and hold-down: this reference has a weight of 35.50 kg and F5(M8) / F12(M8) terminals.
Will it fit your current battery tray?
It has external dimensions of 407 × 177 × 225 mm and weighs 35.50 kg. It uses F5(M8) / F12(M8) terminals, the system that anchors and connects it in the vehicle. Checking the three dimensions and the terminal position before buying avoids the most common mistake when replacing a battery.
What Ritar does differently
Ritar is one of the world's largest VRLA battery manufacturers. Its RA, RT, RL, HR and FT series equip UPS, telecoms and solar systems worldwide with very consistent quality. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.
The Ritar HT12-110: HT range and AGM technology
The HT is the Ritar range the HT12-110 belongs to: it shares the same construction and quality criteria with the rest of the series, and varies in capacity and format to suit each vehicle.
AGM (Absorbent Glass Mat) technology seals the electrolyte in glass microfibre. The result is a maintenance-free battery that is highly vibration-resistant and able to withstand deep discharges that would ruin a classic lead-acid battery.
Usage and maintenance tips
Replace all the batteries in the set at once and avoid environments continuously above 25 °C. Check the float voltage of the UPS or charger: a voltage that is too high shortens the life of a sealed battery.
Manufacturer's warranty
The Ritar HT12-110 comes with the manufacturer's official warranty against manufacturing defects. If it fails through a defect within the warranty period, we replace it at no cost to you.
Delivery times and returns
Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.
Data sheet
-
BrandRITAR
-
ReferenceHT12-110
-
ModelRITAR HT
-
Voltage (V)12
-
Length407.00 mm
-
Width177.00 mm
-
Height225.00 mm
-
Weight35.5 Kgs
-
TechnologyAGM
-
Terminal typeF5(M8) / F12(M8)
-
Capacity (C20)116 4Ah (c20)
-
Capacity (C10)110Ah (c10)
Specific References
-
MPNHT12-110
Comparison: Ritar HT12-110 vs equivalents
The Ritar HT12-110 is interchangeable with these equivalent references: BATTERY-12LS-120 M8 (Q-battery).
| Product | Specifications | Technology | Price |
|---|---|---|---|
|
|
12V 116Ah | AGM | €455.80 |
|
|
12V 126Ah | AGM | €484.95 |
Equivalences verified by our technical team: same dimensions, polarity, capacity and CCA. Official manufacturer warranty on every option.
Recommended accessories
Frequently asked questions
Is the HT12-110 model AGM? What does this technology offer?
Yes. The HT12-110 from Ritar uses AGM (Absorbent Glass Mat) technology: a sealed lead-acid battery where the electrolyte is absorbed in a glass-fibre mat. It withstands more charge/discharge cycles than a conventional one, handles heat better and is the required technology for devices with advanced Start-Stop and regenerative braking. Expected lifespan: 5-8 years under normal conditions.
What are the measurements of the HT12-110 model?
Dimensions (length × width × height) are 407×177×225 mm — also written as 407x177x225 mm — following the European DIN standard. Always measure the space in your device before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.
The top-rated online battery store in Spain
-
Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.
Trustpilot · verified, no filters
-
Official Varta distributor
Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.
World’s best-selling battery brand
-
+100,000 satisfied customers
More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.
They trust us and recommend us
Choose trust, choose quality, choose baterias.com.