Fulbat FT4B-BS GEL · Motorcycle battery 12V 2.4Ah 40A GEL

Motorcycle battery Fulbat FT4B-BS GEL 12V 2.4Ah 40A GEL
search
  • Motorcycle battery Fulbat FT4B-BS GEL 12V 2.4Ah 40A GEL
  • Motorcycle battery Fulbat FT4B-BS GEL 12V 2.4Ah 40A GEL

Specifications

BrandFULBAT
Part numberFT4B-BS GEL
Voltage (V)12V
Capacity (C20)2.40Ah
Capacity (C10)2.30Ah (c10)
TechnologyGEL
Length113mm
Width38mm
Height85mm
See the full specifications →
€28.07
VAT included
Quantity

  • 24-48h delivery
  • 14-day returns
  • Secure payment
  • +11,700 reviews

Brand FULBAT Reference FT4B-BS GEL

Fulbat FT4B-BS GEL 12V 2,4Ah 40A is a sealed motorcycle battery ready to fit, with the JIS reference your mechanic recognises at a glance. Vibration-resistant, keeps voltage during the winter off-season and cranks first time when you take it out for a ride.

Why this motorcycle battery?

  • Same JIS referenceas your bike's original — fits first time
  • Sealed and ready to useno acid handling, no refills
  • Survives winter storageholds charge through long off-season
Voltage
12 V
Capacity
2,4 Ah C20
Cold cranking
40 A EN-1
Dimensions
113×38×85 mm
Technology
GEL
Logo Fulbat

Motorcycle battery Fulbat FT4B-BS 2.4Ah 40A 12V

12VVoltage
2.4AhCapacity
40ACold cranking

With 2.4 Ah at 12 V and 40 A of cold cranking current (EN), the Fulbat FT4B-BS with GEL technology replaces the original battery of motorcycles, scooters, quads and personal watercraft. Its 113 × 38 × 85 mm make it the exact replacement for the 2.4 Ah battery fitted as standard to many motorcycles.

  • Sealed and ready to fit, no acid handling.
  • GEL: excellent resistance to deep discharge and long cycle life.
  • Compact and lightweight format.
  • Holds its charge through winter storage.

What the Fulbat FT4B-BS is for

The Fulbat FT4B-BS is a common replacement in motorcycles, scooters, quads and personal watercraft. If your bike spends the winter standing, a trickle charger stops it reaching spring flat.

Dimensions, polarity and mounting

It has external dimensions of 113 × 38 × 85 mm. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.

Technology inside the Fulbat FT4B-BS

The FT4B-BS is one of the Fulbat references for this type of use; it shares the same manufacturing and quality-control criteria as the rest of the brand's catalogue.

GEL technology fixes the acid in a solid gel. That removes maintenance and leaks and gives very long cycle life, in exchange for slightly slower recharging and lower peak current than an AGM.

Fulbat: the maker behind the FT4B-BS

French brand Fulbat is a European reference in motorcycle, garden and leisure batteries: compact ranges, clear JIS codes and a consistent quality that workshops know well. At baterias.com we work directly with the manufacturer or its official distributor: real stock, brand-new product and official warranty.

Warranty and coverage

The Fulbat FT4B-BS comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.

Care and maintenance

Avoid repeated cranking attempts on a cold bike for long: if it does not start on the third try, let the battery rest for a minute. If the bike spends the winter standing, connect a trickle charger: deep discharge through inactivity is the first cause of premature failure.

Delivery times and returns

Same-day dispatch from our warehouse for in-stock orders placed before 6:00 pm: 24-48 working hours in mainland Spain and Portugal, 3 to 5 days in the islands and the rest of Europe. Returns are accepted for 14 days if the battery has not been used (free collection on the Iberian mainland). You will receive tracking by email.

BCOM-FULBAT-FT4B-BS GEL

Data sheet

Brand
FULBAT
Model
FULBAT Motorcycle GEL
Voltage (V)
12V
Length
113mm
Width
38mm
Height
85mm
Technology
GEL
Cold cranking amps (EN)
40A
Capacity (C20)
2.40Ah
Capacity (C10)
2.30Ah (c10)

Specific References

MPN
FT4B-BS GEL

Recommended accessories — complement the Fulbat FT4B-BS GEL with a charger or tester

How to change the battery

Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.

⏱ 10-15 min🛠 Tools: 8 mm wrench (some bikes use 10 mm) · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery compartment

    On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify the engine starts

    Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.

Frequently asked questions

How is the Fulbat FT4B-BS GEL battery installed in the vehicle?

In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

What is the service life of the FT4B-BS GEL model?

Expected lifespan of the Fulbat FT4B-BS GEL is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the dimensions of the Fulbat FT4B-BS GEL battery?

Dimensions (length × width × height) are 113×38×85 mm — also written as 113x38x85 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Will the Fulbat FT4B-BS GEL battery fit my motorcycle?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The FT4B-BS GEL typically fits a wide range of European vehicles thanks to its standard DIN case format.

Which batteries are equivalent to the Fulbat FT4B-BS GEL?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,700 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.