12,099 customer reviewsThank you for trusting usThank you! Excellent 4.5 out of 5

Fulbat FT7B-4 GEL · Motorcycle battery 12V 6.8Ah 110A GEL

Specifications

BrandFULBAT
Part numberFT7B-4 GEL
Voltage (V)12V
Capacity (C20)6.80Ah
Capacity (C10)6.50Ah (c10)
Cold cranking amps (EN)110A
TechnologyGEL
Length150mm
Width65mm
See the full specifications →
Price: €47.03
VAT included
Quantity
  • 24-48h delivery
  • 14-day returns
  • Secure payment
  • +12,000 reviews

Brand: Fulbat batteries Part number: FT7B-4 GEL

Fulbat FT7B-4 GEL 12V 6,8Ah 110A is a sealed motorcycle battery ready to fit, with the JIS reference your mechanic recognises at a glance. Vibration-resistant, keeps voltage during the winter off-season and cranks first time when you take it out for a ride.

Why this motorcycle battery?

  • Same JIS referenceas your bike's original — fits first time
  • Sealed and ready to useno acid handling, no refills
  • Survives winter storageholds charge through long off-season
Voltage
12 V
Capacity
6,8 Ah C20
Cold cranking
110 A EN-1
Dimensions
150×65×93 mm
Technology
GEL
Polarity
Positive on the left
Logo Fulbat

Motorcycle battery Fulbat FT7B-4 6.8Ah 110A 12V

12VVoltage
6.8AhCapacity
110ACold cranking

With 6.8 Ah at 12 V and 110 A of cold cranking current (EN), the Fulbat FT7B-4 with GEL technology replaces the original battery of motorcycles, scooters, quads and personal watercraft. It replaces the original battery without adaptation in motorcycles with a 150 × 65 × 93 mm format: same 6.8 Ah capacity and the positive terminal on the left.

  • GEL technology: gelled electrolyte, fully sealed and maintenance-free.
  • Same JIS code as the original battery: fits first time.
  • Resistant to the vibration typical of two wheels.
  • Energetic cranking for high-compression engines.

What the Fulbat FT7B-4 is for

The Fulbat FT7B-4 is a common replacement in motorcycles, scooters, quads and personal watercraft. If your bike spends the winter standing, a trickle charger stops it reaching spring flat.

Will it fit your current battery tray?

In terms of format, the Fulbat FT7B-4 measures 150 × 65 × 93 mm (length × width × height). The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. Before replacing it, measure your current battery tray: if all three dimensions and the terminal positions match, the swap is direct and needs no adapters.

Fulbat: the maker behind the FT7B-4

French brand Fulbat is a European reference in motorcycle, garden and leisure batteries: compact ranges, clear JIS codes and a consistent quality that workshops know well. All the Fulbat batteries in our catalogue are genuine product, recently manufactured and covered by the manufacturer's warranty.

Technology inside the Fulbat FT7B-4

The FT7B-4 is one of the Fulbat references for this type of use; it shares the same manufacturing and quality-control criteria as the rest of the brand's catalogue.

In a GEL battery the electrolyte is gelled with silica: it is fully sealed, cannot spill and tolerates deep discharge very well. It is the preferred technology in electric mobility, marine service and heavy-cycling applications.

How to make it last longer

If the bike spends the winter standing, connect a trickle charger: deep discharge through inactivity is the first cause of premature failure. Avoid repeated cranking attempts on a cold bike for long: if it does not start on the third try, let the battery rest for a minute.

Official warranty

The Fulbat FT7B-4 comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.

Shipping, delivery and returns

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.

  • Reference
    BCOM-FULBAT-FT7B-4 GEL

Data sheet

  • Brand
    FULBAT
  • Model
    FULBAT Motorcycle GEL
  • Voltage (V)
    12V
  • Length
    150mm
  • Width
    65mm
  • Height
    93mm
  • Technology
    GEL
  • Terminal layout
    Positive left
  • Cold cranking amps (EN)
    110A
  • Capacity (C20)
    6.80Ah
  • Capacity (C10)
    6.50Ah (c10)

Specific References

  • MPN
    FT7B-4 GEL

Recommended accessories — complement the Fulbat FT7B-4 GEL with a charger or tester

Frequently asked questions

How do I fit the FT7B-4 GEL model in my motorcycle?

In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on our blog. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

How long does the Fulbat FT7B-4 GEL battery last?

Expected lifespan of the Fulbat FT7B-4 GEL is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the measurements of the FT7B-4 GEL model?

Dimensions (length × width × height) are 150×65×93 mm — also written as 150x65x93 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Will the Fulbat FT7B-4 GEL battery fit my motorcycle?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The FT7B-4 GEL typically fits a wide range of European vehicles thanks to its standard DIN case format.

What are the equivalents of the FT7B-4 GEL model?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +12,000 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.

Loading...
Back to top