Fulbat FTX14AH-BS · Motorcycle battery 12V 12.6Ah 210A AGM

Motorcycle battery Fulbat FTX14AH-BS 12V 12.6Ah 210A AGM
search
  • Motorcycle battery Fulbat FTX14AH-BS 12V 12.6Ah 210A AGM

Specifications

BrandFULBAT
Part numberFTX14AH-BS
Voltage (V)12V
Capacity (C20)12.60Ah
Capacity (C10)12Ah (c10)
TechnologyAGM
Length135mm
Width90mm
Height167mm
See the full specifications →

This product is priced on demand to offer you the best available price at all times.

Please contact us to request a quote and we will inform you about availability and the best price on the entire website, as well as the delivery time.

Thank you

Fulbat FTX14AH-BS 12V 12,6Ah 210A is a sealed motorcycle battery ready to fit, with the JIS reference your mechanic recognises at a glance. Vibration-resistant, keeps voltage during the winter off-season and cranks first time when you take it out for a ride.

Why this motorcycle battery?

  • Same JIS referenceas your bike's original — fits first time
  • Sealed and ready to useno acid handling, no refills
  • Survives winter storageholds charge through long off-season
Voltage
12 V
Capacity
12,6 Ah C20
Cold cranking
210 A EN-1
Dimensions
135×90×167 mm
Technology
AGM
Polarity
Positive on the left
Free quote, no obligation

Request a quote for your Motorcycle battery Fulbat FTX14AH-BS 12V 12.6Ah 210A AGM

  • Reply in under 24 working hours
  • Best price guaranteed
Attach photo (optional)
Photo of the old battery or vehicle documentation · Max. 3 · 8 MB · images or PDF
Logo Fulbat

Motorcycle battery Fulbat FTX14AH-BS 12.6Ah 210A 12V

12VVoltage
12.6AhCapacity
210ACold cranking

The Fulbat FTX14AH-BS is a motorcycle battery with 12.6 Ah and 210 A of cold cranking current (EN), designed for motorcycles, scooters, quads and personal watercraft. It measures 135 × 90 × 167 mm and the positive terminal on the left, the format sought by anyone replacing a 12.6 Ah battery in motorcycles.

  • Same JIS code as the original battery: fits first time.
  • AGM technology: absorbed electrolyte, no spills, can be mounted at an angle.
  • Energetic cranking for high-compression engines.
  • Resistant to the vibration typical of two wheels.

What the Fulbat FTX14AH-BS is for

The Fulbat FTX14AH-BS is a common replacement in motorcycles, scooters, quads and personal watercraft. If your bike spends the winter standing, a trickle charger stops it reaching spring flat.

Size, terminals and hold-down of the Fulbat FTX14AH-BS

In terms of format, the Fulbat FTX14AH-BS measures 135 × 90 × 167 mm (length × width × height). The positive terminal on the left decides which side the cables end up on: it is the detail that causes most buying mistakes, so check it before ordering. For a direct replacement, the current battery tray must accept these dimensions and the same terminal layout; otherwise adapters will be needed or the hold-down will change.

Why choose Fulbat batteries

French brand Fulbat is a European reference in motorcycle, garden and leisure batteries: compact ranges, clear JIS codes and a consistent quality that workshops know well. We guarantee that every Fulbat arrives new, charged and with the manufacturer's full warranty.

Technology inside the Fulbat FTX14AH-BS

Within the Fulbat catalogue, the FTX14AH-BS is the 12.6 Ah model designed for this application.

In an AGM battery the electrolyte is absorbed in glass-fibre separators: there is no free liquid, it cannot spill and it can be mounted at an angle. That construction lowers internal resistance, speeds up recharging and multiplies cycle life compared with a conventional battery.

How to make it last longer

If the bike spends the winter standing, connect a trickle charger: deep discharge through inactivity is the first cause of premature failure. Check the resting voltage before the season (above 12.6 V on a charged battery) and make sure the terminals are clean and tight.

Manufacturer's warranty

The Fulbat FTX14AH-BS comes with the manufacturer's official warranty. The warranty does not cover discharge through prolonged inactivity: if the bike stands for months, use a trickle charger.

Shipping, delivery and returns

Order before 6:00 pm with stock available and it leaves today: mainland Spain and Portugal receive it in 24-48 working hours, the islands and the rest of the EU in 3 to 5 days. You have 14 days to return it if it has not been installed, with free collection on the mainland, and shipment tracking by email.

BCOM-FULBAT-FTX14AH-BS

Data sheet

Brand
FULBAT
Model
FULBAT Motorcycle MF
Voltage (V)
12V
Length
135mm
Width
90mm
Height
167mm
Technology
AGM
Terminal layout
Positive left
Cold cranking amps (EN)
210A
Capacity (C20)
12.60Ah
Capacity (C10)
12Ah (c10)

Specific References

MPN
FTX14AH-BS

Recommended accessories — complement the Fulbat FTX14AH-BS with a charger or tester

How to change the battery

Guide to replace your motorcycle battery in 10-15 minutes. Motorcycle batteries are light (2-5 kg) and usually need an 8 mm wrench.

⏱ 10-15 min🛠 Tools: 8 mm wrench (some bikes use 10 mm) · Protective gloves
  1. Step 1. Prepare the vehicle

    Park on a flat surface, switch off the engine and remove the key. Make sure all lights and electrical accessories are off. Wait 1-2 minutes before starting.

  2. Step 2. Locate the battery compartment

    On motorcycles it is usually under the seat, in the rear cowl or behind a side panel. Check the manual — access varies a lot between models.

  3. Step 3. Disconnect the negative (−) terminal

    Use the 10 mm wrench to loosen the negative cable nut (black, marked −) and remove the cable from the post. Move it aside so it cannot touch any bodywork.

  4. Step 4. Disconnect the positive (+) terminal

    Repeat with the positive cable (red, marked +). Important: never let a terminal touch metal of the car while the other is still connected.

  5. Step 5. Remove the old battery

    Loosen the hold-down clamp or the straps that secure it. Lift the battery carefully — typical weight 2-5 kg. Check the terminals are not corroded before fitting the new one.

  6. Step 6. Install the new battery

    Place the battery in the same orientation as the old one (positive terminal on the same side). Tighten the hold-down clamp firmly.

  7. Step 7. Connect the cables

    Connect the positive (+) terminal first, then the negative (−). Tighten the nuts with the wrench until each terminal does not move. Apply anti-spark grease if you have any.

  8. Step 8. Verify the engine starts

    Close the bonnet. Start the engine to confirm everything works. On cars with Start-Stop or a BMS, you may need to register the battery via OBD so the alternator applies the correct charging profile.

Frequently asked questions

How is the Fulbat FTX14AH-BS battery installed in the vehicle?

In most motorcycles it fits in 15-30 minutes with a 10 mm wrench; if the battery is under the seat or in the boot the time can double. See the step-by-step guide on this page. Quick summary: 1) switch off the engine and remove the key; 2) locate the original battery (engine bay, boot or under seat); 3) disconnect the negative (−) terminal first, then the positive (+); 4) loosen the hold-down clamp and remove the old battery; 5) fit the new one in the same orientation — match the polarity shown on the product sheet; 6) connect the positive (+) first, then the negative (−). On motorcycles with Start-Stop or BMS, register the battery via OBD so the alternator applies the correct charging profile.

How long does the Fulbat FTX14AH-BS battery last?

Expected lifespan of the Fulbat FTX14AH-BS is 4 to 7 years in regular use (depends on technology and climate). In cold regions it drops slightly due to cold-start stress; in very hot regions it also drops because of electrolyte evaporation. To extend its life: avoid deep discharges (headlights on with engine off), have the alternator checked yearly, and keep the battery clean and properly secured.

What are the measurements of the FTX14AH-BS model?

Dimensions (length × width × height) are 135×90×167 mm — also written as 135x90x167 mm — following the European DIN standard. Always measure the space in your motorcycle before buying: even one extra millimetre can prevent the hold-down clamp from closing. The height shown includes the terminals.

Will the Fulbat FTX14AH-BS battery fit my motorcycle?

Three options to confirm: 1) enter your number plate in the finder (DGT/DVLA/KBA auto-detect your model and engine); 2) check the "Compatible vehicles" tab on this page, where we list every vehicle verified by our technical team; 3) if you cannot find your model, message us on WhatsApp with brand, model, engine and year — we reply during business hours (Mon–Fri 10:00–13:30 and 16:40–18:00 (Spanish time, CET)). The FTX14AH-BS typically fits a wide range of European vehicles thanks to its standard DIN case format.

Which interchangeable batteries are there for this one?

Directly interchangeable batteries (same dimensions, same polarity, same Ah and CCA) are the OEM equivalents from leading brands: Bosch, Tudor, Exide and, depending on the model, Banner or Yuasa. Exact equivalence depends on technology — an EFB cannot be replaced with a conventional battery in Start-Stop motorcycles. See the "Equivalents" section to view recommended options at the same performance level.


The top-rated online battery store in Spain

  • 4.5/5 · +11,800 reviews

    Audited by Trustpilot, no filters, no edits. The top-rated battery store in Spain.

    Trustpilot · verified, no filters

  • Official Varta distributor

    Official Varta wholesale distributor. 100% genuine batteries, recently manufactured, best price and no middlemen.

    World’s best-selling battery brand

  • +100,000 satisfied customers

    More than 100,000 customers already trust baterias.com — and recommend us to their friends and family.

    They trust us and recommend us

Choose trust, choose quality, choose baterias.com.